A/D & D/A

VadaTech has one of the most extensive portfolios of A/D and D/A converters in the industry, in a range of form factors and a variety of channel and sampling rate options to meet all your data acquisition needs. Our ADC and DAC are widely used in high energy physics, military, aerospace and industrial applications thanks to variants based on MicroTCA.4, MicroTCA.0, MicroTCA.1, FMC, VME/VXS and AdvancedTCA (ATCA).

 

Please contact us if you have any requirements that you don’t see below, our agile R&D team has many years’ experience in developing custom solutions.

AMC FPGA A/D D/A

( close )

AMC902

Analog Filter, Gain Control with Dual Clock Conditioning

  • Dual analog IF input with programmable attenuator per channel
  • Filtered and amplified Analog IF output
  • Dual clock input with flexible routing to backplane
  • Attenuation configuration via Port 0 (GbE) or front panel serial port
  • Single-module mid-size (option for full-size)
View product AMC902 Data Sheet

AMC599

AMC Dual ADC @ 6.4 GSPS and Dual DAC @ 12 GSPS

  • Xilinx UltraScale™ XCKU115 FPGA
  • Dual ADC @ 6.4 GSPS 12-bits or quad ADC at 3.2 GSPS
  • Dual DAC (AD9162 or AD9164) @ 12 GSPS 16-bits
  • Two banks of 64-bit wide and a single bank of 32-bit wide DDR-4 for a total of 20 GB
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC599 Data Sheet

AMC590

56 GSPS 8-bit ADC, 1, 2 or 4 channel, UltraScale™

  • 8-bit ADC at up to 56 GSPS
  • 1 x 56, 2 x 28 or 4 x 14 GSPS channel
  • Xilinx UltraScale™ XCKU115 FPGA
  • 24 GB of DDR-4 Memory (3 banks of 64-bit)
  • ADC is 65 nm CMOS process technology
  • Very low power consumption (5 W for the ADC)
  • Single module, mid-size or full-size
  • Calibration warning and over-range flags
  • 15 GHz –3 dB analog input bandwidth
  • Internal 14 GHz VCO/PLL per I/Q ADC pair
  • Differential analog input: 1.0V PPD
View product AMC590 Data Sheet

AMC597

300 MHz to 6 GHz Octal Versatile Wideband Transceiver (MIMO), UltraScale™ AMC

  • Xilinx UltraScale™ XCKU115 FPGA
  • Octo complete transceiver signal chain solution
  • Based on quad Analog Devices AD9371
  • Frequency range 300 MHz to 6 GHz
  • Tx synthesis bandwidth (BW) to 250 MHz
  • Rx bandwidth: 8 MHz to 100 MHz
  • Supports Time Division Duplex (TDD) and Frequency Division Duplex (FDD) operation
  • On-board clocking or external clock with multi-transceivers synchronization capability
  • Three banks of DDR-4 for total 20 GB
View product AMC597 Data Sheet

MZ523B

Mezzanine for MRT523, 12 Channel Variable Gain

  • Mezzanine module for MRT523
  • Routes 12 analog inputs, 2 analog outputs and CLK IN from rear panel SMPM to mezzanine connector
  • Routes TRIG IN/OUT, user I/O routed from rear panel DensiShield to mezzanine connectors
  • Per channel AC/DC selection and programmable gain
  • RoHS compliant
View product MZ523B Data Sheet

MZ523A

Mezzanine for MRT523, 12 Channel Passive Pass-through

  • Mezzanine module for MRT523
  • Routes 12 analog inputs, 2 digital outputs, input clock, trigger in/out, three pairs of user defined digital I/O from rear panel to mezzanine connectors
  • Direct connection on all analog channels, giving full performance of the ADC
  • RoHS compliant
View product MZ523A Data Sheet

MRT523

MicroTCA.4 RTM for AMC523, 12 Ch ADC 16-bit @ 125 MSPS

  • MicroTCA.4 RTM for the AMC523
  • Twelve channel ADC 16-bit @ 125 MSPS utilizing AD9653 device routed to AMC523
  • Two analog outputs from AMC523’s DACs Mezzanine
  • ADC and DAC signal routed through amezzanine
  • Three pairs of user defined digital IO
  • Double module, mid-size (full-size optional)
View product MRT523 Data Sheet

AMC594

NEW

56 GSPS 8-bit ADC, 2 or 4 channel with XCVU190 UltraScale™

  • 8-bit ADC at up to dual 56 GSPS
  • 2 x 56 or 4 x 28 GSPS channels
  • Xilinx UltraScale™ XCVU190 FPGA
  • 16 GB of DDR-4 Memory (2 banks of 64-bit)
  • ADC is 65 nm CMOS process technology)
  • Double module, full-size
  • Calibration warning and over-range flags
  • 15 GHz –3 dB analog input bandwidth
  • Internal 14 GHz VCO/PLL per I/Q ADC pair
  • Differential analog input: 1 VPP
View product AMC594 Data Sheet

DAQ523

MTCA.4 Data Acquisition Sub-system, 12-Ch 16-bit, 125 MSPS

  • Complete Data Acquisition sub-system
  • Supported by DAQ Series™ data acquisition software
  • Twelve channel ADC 16-bit @ 125 MSPS using AD9653
  • Dual DAC 16-bit @ 250 MSPS using MAX5878
  • Xilinx Kintex-7 FPGA XC7K410T with 2 GB of DDR3 memory
  • Double module, mid-size (full-size optional) AMC and RTM, compliant to μTCA.4
  • Internal or external clock, Trig in/out configurable by software
  • x8 PCIe (or dual x4) to system host
  • Quad front-panel SFP+ (up to 6.6 Gbps)
  • Supports user-defined analog front-end
View product DAQ523 Data Sheet

AMC591

56 GSPS 8-bit ADC, 2 or 4 channel with XCVU190 UltraScale

  • 8-bit ADC at up to dual 56 GSPS
  • 2 x 56 or 4 x 28 GSPS channels
  • Xilinx UltraScale™ XCVU190 FPGA
  • 16 GB of DDR-4 Memory (2 banks of 64-bit)
  • ADC is 65 nm CMOS process technology
  • Very low power consumption (5 W for the ADC)
  • Double module, mid-size or full-size
  • Calibration warning and over-range flags
  • 15 GHz –3 dB analog input bandwidth
  • Internal 14 GHz VCO/PLL per I/Q ADC pair
  • Differential analog input: 1.0V PPD
  • Tongue 2 for additional SERDES
View product AMC591 Data Sheet

MZ523C

Mezzanine for MRT523, 12 Channel Optical Detector

  • 12 optical detectors routed to mezzanine connector
  • Per channel programmable gain, bandwidth and AC/DC coupling
  • 0 μW to 160 μW optical input power
  • 1310 nm to 1650 nm input wavelength
  • Noise 4 x 10–4 of full scale at min gain
  • Linearity < 1%
  • Gain programmable 0 – 57 dB
  • Sensitivity 0.7 W/A typical
  • Mezzanine module for MRT523
  • RoHS compliant
View product MZ523C Data Sheet

AMC524

Quad ADC, 16-bit @ 125 MSPS, Dual DAC, Artix-7

  • Quad ADC 16-bit @ 125 MSPS (AD9653)
  • Dual DAC 12-bit @ 2.5 GSPS (DDS AD9915)
  • Artix-7 FPGA with dual banks of DDR-3, 2 GB total
  • Conduction cooled version availableInternal, external or backplane clock with on-board wide-band PLL
  • AMC Ports 4-7 and 8-11 are routed toFPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Single module, mid-size per AMC.0
  • IPMI 2.0 compliant
View product AMC524 Data Sheet

AMC529

AMC Dual DAC 14-bit @ 5.7 GSPS Module

  • Dual AD9129 DAC, 14-bit at 5.7 GSPS(2.85 GSPS direct RF synthesis)
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • Xilinx Virtex-7 690T FPGA in FFG-1761package
  • Triple bank QDR-II+ memory (432 Mb total) and 1GB DDR3
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 optionally routed to the FPGA
  • Internal, external or backplane clock with onboard wide-band PLL
  • IPMI 2.0 compliant
View product AMC529 Data Sheet

AMC526

AMC Dual ADC, Virtex-7, 12-Bit @ 2.6 GSPS

  • Single module, mid-size per AMC.0• Conduction cooled version available
  • Dual AD9625 ADC, 12-Bit @ 2.6 GSPS in single module, mid-size
  • Xilinx Virtex-7 690T FPGA in FFG-1761 package
  • Quad bank QDR-II+ memory (576 Mb total) and 1Gb DDR3
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 optionally routed to the FPGA
  • Internal, external or backplane clock with on-board wide-band PLL
  • IPMI 2.0 compliant
View product AMC526 Data Sheet

AMC511

FPGA, Quad Channel ADC 180 MSPS

  • Four channel LTC2209 ADC 180 MSPS @ 16-bit resolution
  • Xilinx Virtex-5 FPGA in FF1136 package
  • PCIe x4 or x8, GbE (FPGA programmable)
  • Aurora/SRIO option on lanes 8 to 11 if the PCIe x8 is not utilized
View product AMC511 Data Sheet

CM044

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

  • Data Processing CoBo (Concentration Board) in AMC format
  • Double module, full-size compliant to MicroTCA.0
  • Virtex-5 FPGA (XC5VFX100T in FFG 1136 package)
  • 256 MB DDR3 DDR2 SDRAM and 32 MB Flash
  • Dual VHDCI, two dual-coax LEMO, and one micro USB connector via the front panel
  • Port 0 and Port 4 for GbE
  • Port 1 for GET Clocks
  • Ports 8-11 for GET Data
  • Activity and MGT LEDs
  • Slow/Fast control of ASIC ADC
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging
View product CM044 Data Sheet

CM045

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

  • Data Processing AMC in double module, mid-size (full-size optional)
  • Compliant to MicroTCA.4
  • Class D1.2 compatible
  • High-speed Kintex-7 FPGA
  • 16 GB DDR3 SDRAM
  • Octal SFP+ via the front panel
  • PCIe x4 Gen 3
  • Two channels of GbE
  • Ten direct low latency connections to backplane
  • Four low latency connections to RTM
  • LVDS parallel bus to RTM
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging
View product CM045 Data Sheet

AMC523

μTCA.4 AMC, Dual DAC 16-Bit @ 250 MSPS

  • Dual DAC 16-bit @ 250 MSPS utilizing MAX5878 device (user programmable for lower sampling rate)
  • Xilinx Kintex-7 FPGA XC7K410T in FFG900 package
  • Supported by DAQ Series™ data acquisition software
  • 2 GB of DDR3 memory
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • x8 PCIe (or dual x4)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Quad SFP+ (up to 6.6 Gbps)
  • JTAG selectable front and backplane
  • AMC.1 and AMC.2 (FPGA programmable)
  • DC Coupled
View product AMC523 Data Sheet

MRT522

MicroTCA.4 RTM for AMC522, 8 Ch ADC

  • MicroTCA.4 RTM for the AMC522
  • Double module, mid-size (full-size optional)
  • Two analog outputs from AMC522’s DACs via SSMC connectors
  • Eight analog inputs (AC or DC coupled) via SSMC connectors feeding on-board ADCs via programmable gain amplifiers
  • Clocks and Trigger In/Out accessible via dual high density DensiShield connectors
  • IPMI v2.0
  • RoHS compliant
View product MRT522 Data Sheet

AMC522

μTCA.4 AMC Dual DAC, 16-bit @ 500 MSPS

  • Dual channel MAX5878 DAC with 500 MSPS @16-bit resolution
  • Compliant to μTCA.4, double module, mid-size (fullsize optional) with rear I/O
  • Xilinx Kintex-7 FPGA
  • AMC.1, AMC.2, and AMC.4 compliant (FPGA programmable)
View product AMC522 Data Sheet

AMC520

AMC 10-channel ADC, MicroTCA.4

  • Double module AMC, compliant to μTCA.4
  • Ten channel of ADC with 125MSPS @ 16-bit resolution utilizing AD9268 device
  • Dual DAC with 250 MSPS @ 16-bit resolution utilizing MAX5878 device (this is user programmable for lower sampling rate)
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • Backplane PCIe Dual x4 or x8/Dual GbE
  • Xilinx Virtex-6 FPGA in FF1759 package
  • Option for QDR-II+
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Dual SFP+ (up to 6.6Gbps)
  • JTAG selectable front and backplane
  • AMC.1 and AMC.2 (FPGA programmable)
View product AMC520 Data Sheet

MRT520

MicroTCA.4 RTM for AMC520

  • MicroTCA.4 RTM for the AMC520
  • Two analog outputs from AMC520’s DACs via SSMC connectors
  • Ten analog inputs (AC or DC coupled) interfacing directly with AMC520’s ADC ICs via SSMC connectors
  • Twelve LVDS signals and three differential reference clock routing to AMC520’s FPGA
  • LVDS and reference clocks accessible via dual high density DensiShield connectors
  • Double module, mid-size (full-size optional)
  • RoHS compliant
View product MRT520 Data Sheet

AMC521

24 Channels ADC, Mixed Sampling Rate

  • Sixteen channel of TI ADS42JB69 ADC 16-bit @ 250MSPS
  • Eight channel SAR TI ADS8568 ADC 16-bit @ 650 KSPS simultaneous
  • Interface to the FPGA is via JESD204B
  • 24 LVDS for Clock/Trig and/or GPIO
  • Virtex-7 FPGA 415T or 690T in FFG1158
View product AMC521 Data Sheet

AMC FPGA A/D D/A

( expand all )

AMC902

Analog Filter, Gain Control with Dual Clock Conditioning

AMC599

AMC Dual ADC @ 6.4 GSPS and Dual DAC @ 12 GSPS

AMC590

56 GSPS 8-bit ADC, 1, 2 or 4 channel, UltraScale™

AMC597

300 MHz to 6 GHz Octal Versatile Wideband Transceiver (MIMO), UltraScale™ AMC

MZ523B

Mezzanine for MRT523, 12 Channel Variable Gain

MZ523A

Mezzanine for MRT523, 12 Channel Passive Pass-through

MRT523

MicroTCA.4 RTM for AMC523, 12 Ch ADC 16-bit @ 125 MSPS

AMC594

56 GSPS 8-bit ADC, 2 or 4 channel with XCVU190 UltraScale™

DAQ523

MTCA.4 Data Acquisition Sub-system, 12-Ch 16-bit, 125 MSPS

AMC591

56 GSPS 8-bit ADC, 2 or 4 channel with XCVU190 UltraScale

MZ523C

Mezzanine for MRT523, 12 Channel Optical Detector

AMC524

Quad ADC, 16-bit @ 125 MSPS, Dual DAC, Artix-7

AMC529

AMC Dual DAC 14-bit @ 5.7 GSPS Module

AMC526

AMC Dual ADC, Virtex-7, 12-Bit @ 2.6 GSPS

AMC511

FPGA, Quad Channel ADC 180 MSPS

CM044

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

CM045

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

AMC523

μTCA.4 AMC, Dual DAC 16-Bit @ 250 MSPS

MRT522

MicroTCA.4 RTM for AMC522, 8 Ch ADC

AMC522

μTCA.4 AMC Dual DAC, 16-bit @ 500 MSPS

AMC520

AMC 10-channel ADC, MicroTCA.4

MRT520

MicroTCA.4 RTM for AMC520

AMC521

24 Channels ADC, Mixed Sampling Rate

ATCA FPGA A/D D/A

ATC136

8 channel ADC, 10-bit @ 2.6 GSPS

  • Xilinx Virtex-7 FPGA
  • Four core QorIQ P2040 Power PC
  • Eight channel EV10AS150B ADC,
    • 10-bit @ 2.6 GSPS
  • Single AD9129 DAC, 14-bit @ 2.8 GSPS
  • Dual sets of ports each for RJ-45, Clock In, and microUSB 
View product ATC136 Data Sheet

ATCA FPGA A/D D/A

( expand all )

ATC136

8 channel ADC, 10-bit @ 2.6 GSPS

FMC A/D D/A

( close )

FMC220

Dual 12-bit 1 GSPS ADC and 16-bit 6 GSPS DAC, FMC

  • Analog Devices AD9234 dual 1 GSPS ADC
  • The Analog inputs for the ADC are DC coupled
  • Analog Devices AD9162/9164 6 GSPS RF DACSupported by DAQ Series™ data acquisition software
    • Update rate up to 12 GSPS in somemodes
    • Up to 7.5 GHz in 2nd and 3rd Nyquist
    • Fast frequency hopping (AD9164)
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Excellent dynamic performance
View product FMC220 Data Sheet

FMC229

FMC Quad DAC 16-bit @ 2.8 GSPS with Quadrature Modulator

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single DAC39J84
    • Quad DAC16-bit @ 2.8 GSPS
    • JESD204B
    • Wideband Digital Quadrature Modulator Correction
    • Digital Summation of Independent Complex Signals
    • Independent Complex Mixer with 48-bit NCO or +/-nxFs/8
    • Selectable 1x-16x Interpolation
  • On board dual Wideband Quadrature Modulator
  • Trig In/Output
  • RoHS compliant
View product FMC229 Data Sheet

FMC250

NEW

FMC Dual ADC 12-bit 2.6 GSPS, Single DAC 16-bit 12 GSPS

  • Dual AD9625 ADC 12-bit at 2.6/2.5/2.0 GSPS
  • 8 JESD204B lanes from each ADC is routed to the FMC+ connector
  • Single DAC AD9164/AD9162 16-bit 12 GSPS
  • FPGA Mezzanine Card (FMC+) per VITA 57.4
  • Excellent dynamic performance
  • Front panel interface includes CLK In, Trig In and Trig Out
View product FMC250 Data Sheet

FMC216

NEW

FMC ADC 12-bit @ 2.6 GSPS and DAC 14-bit @ 5.6 GSPS

  • ADC AD9625
    • 8 JESD204B lanes from the ADC isrouted to the FMC
    • 12-bit at 2.6 GSPS
    • Wide full power bandwidth supports IF sampling of signals up to 2 GHz
  • DAC AD9129
    • 14-bit at 5.6 GSPS
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Excellent dynamic performance
  • Front panel interface includes CLK In, Trig Inand Trig Out
View product FMC216 Data Sheet

FMC227

FMC Dual ADC, 12-bit @ 2.6 GSPS with single DAC 14-bit @ 5.7GSPS

  • Dual AD9625 ADC
    • 4/6 JESD204B lanes from the ADC is routed to the FMC
    • 12-bit @ 2.6 GSPS
    • Wide full power bandwidth supports IF sampling of signals up to 2 GHz
  • Single DAC AD9129 
    • 14-bit @ 5.7 GSPS
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Excellent dynamic performance
  • Front panel interface includes CLK In, Trig In and Trig Out
View product FMC227 Data Sheet

FMC219

FMC High-speed Dual DAC 14-bit at 2.5 GSPS with Wide-band PLL on board

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Dual AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential analog output swing
  • Programmable DSP clock
  • Front panel GPIO (5 LVDS, or 10 single ended)
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via SSMC
    • Analog out
    • Reference clock input
    • TRIG input
View product FMC219 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking or external clock with multi-cards ynchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

FMC211

FMC High-speed ADC 10-bit at 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • ADC EV10AS150B  @ 2.6 GSPS
  • 5 GHz Full Power Input Bandwidth (–3dB)
  • True single core architecture (no calibration required)
  • Full scale Analog input Voltage Span 500 mVpp
  • Ultra Low Jitter wideband PLL Synthesizer
  • Option for Direct RF clock sampling or  reference clock input
  • The ADC RF input can be differential or single ended
View product FMC211 Data Sheet

FMC212

FMC Dual ADC 12-bit @ 1.5 GSPS, Dual DAC 16-bit @ 2.8 GSPS

  •  FPGA Mezzanine Card (FMC) per VITA-57
  • Single module
  • Dual ADC with EV12AS200AZP
    • 12-bit 1.5GSPS
    • Full power input Bandwidth at 1.5GSPS is 2.3GHz
    • Very low latency < 5Clock Cycles
  • Dual DAC with TI DAC39J82  
    • 16-bit 2.8GSPS
    • JESD204B 8 lanes
  • On board wide-band PLL
  • RF clock input reference
  • Trig In/Out
  • RoHS compliant
View product FMC212 Data Sheet

FMC213

FMC Quad ADC 16-bit @ 250 MSPS, DAC 14-bit @ 5.7 GSPS

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Quad ADC based on ADS42JB69
  • DAC based on AD9129
  • RF front panel reference clock input
  • RoHS compliant
View product FMC213 Data Sheet

FMC215

FMC ADC 12-bit @ 4.0 GSPS, DAC 12-bit @ 4.5 GSPS

  • FPGA Mezzanine Card (FMC) per VITA 57
  • TI ADC12J4000 ADC
  • E2V EV12DS400 DAC
  • Excellent dynamic performance
  • Front panel interface includes CLK In, Trig In, AnalogIn/Out, and GPIO
  • Ultra Low-Noise wide-band PLL
  • On-chip delay locked loops (DLLs) optimize timing between different clock domains.
View product FMC215 Data Sheet

FMC218

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single FMC size
  • Single AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSP
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX
    • Analog out
    • Reference clock input
    • TRIG input
    • TRIG output
    • GPIO
View product FMC218 Data Sheet

FMC221

FMC DAC 14-bit @ 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single module
  • Single AD9739 DAC 14-bit at 2.5 GSPS
  • 2Vpp Differential Analog Output Swing
  • Programmable DSP Clock
  • Dynamic performance:
    • 8 QAM carriers @ 400MHz IF: -71dBc
    • 16QAM carriers @ 400MHz IF: -68dBc
    • 32QAM carriers @ 400MHz IF: -65dBc
    • 72QAM carriers @ 600MHz IF: -61dBC
  • Single Tone NSD @ 2.4GSPS:
    • 166 dBm/Hz @ 100MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX
    • Analog out
    • Ref clock input
    • Trig input
    • Trig output
    • GPIO
View product FMC221 Data Sheet

FMC222

FMC Dual DAC 14-bit @ 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single module
  • Dual AD9739 DAC 14-bit at 2.5 GSPS
  • Chip synchronization between the two
  • 2Vpp Differential Analog Output Swing
  • Programmable DSP Clock
  • Dynamic performance:
    • 8 QAM carriers @ 400MHz IF: -71dBc
    • 16QAM carriers @ 400MHz IF: -68dBc
    • 32QAM carriers @ 400MHz IF: -65dBc
    • 72QAM carriers @ 600MHz IF: -61DbC
  • Single Tone NSD @ 2.4GSPS:
    • 166 dBm/Hz @ 100MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX
    • Analog out
    • Ref clock input
    • Trig input
    • Trig output
    • GPIO
View product FMC222 Data Sheet

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

FMC224

FMC Quad DAC 16-bit @ 2.8 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Quad port DAC39J84
    • DAC 16-bit at 2.8 GSPS
    • JESD204B
    • Independent 1x-16x Interpolation
    • Independent Complex Mixers with 48-bit NCO/or +/-xFs/8
    • Sinx/x Correction Filters
    • Digital Summation of Independent Complex Signals
  • On board-Wide band PLL
  • Trig In/Out
  • RoHS compliant
View product FMC224 Data Sheet

FMC225

12-bit 4.0 GSPS ADC and 14-bit 5.7 GSPS DAC, FMC

  • FPGA Mezzanine Card (FMC) per VITA 57
  • TI ADC12J4000 ADC
    • Usable output bandwidth of 800 MHz at 4x decimation and 4000 MSPS
    • Usable output bandwidth of 100 MHz at 32x decimation and 4000 MSPS
    • Bypass Mode for full Nyquist output bandwidth
  • Analog Devices AD9129 DAC
    • DC-to-1.4 GHz in Baseband mode
    • DC-to-1.0 GHz in 2x Interpolation mode
    • 1.4 to 4.2 GHz in Mix-Mode
  • Supported by DAQ Series™ data acquisition software
  • Excellent dynamic performance
  • Front panel interface includes CLK In, Trig In, Analog In/Out, and GPIO
  • Ultra Low-Noise wide-band PLL
  • On-chip delay locked loops (DLLs) optimize timing between different clock domains.
View product FMC225 Data Sheet

FMC226

Dual ADC, 12-bit @ 4.0 GSPS, FMC

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Dual Texas Instruments ADC12J4000 ADC
    • Four JESD204B lanes per ADC are routed to the FMC connector
    • Usable output bandwidth of 800 MHz at 4x decimation and 4000 MSPS
    • Usable output bandwidth of 100 MHz at 32x decimation and 4000 MSPS
  • Supported by DAQ Series™ data acquisition software
  • Excellent dynamic performance
  • Front panel interface includes CLK In, Trig In, Analog In, and GPIO
  • Ultra Low-Noise wide-band PLL
View product FMC226 Data Sheet

FMC228

Quad ADC 12-bit @ 1 GSPS, FMC

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Quad ADC based on AD9234
    • Optional decimate-by-2 DDC per channel
    • JESD204B
    • 2 GHz analog input full power bandwidth
  • Option for Direct RF sampling clock via front panel
  • Supported by DAQ Series™ data acquisition software
  • On board wide-band PLL
  • Trig In/Out
  • CLK In
View product FMC228 Data Sheet

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single ADC EV10AS150B @2.5 GSPS
  • Single module
  • 5 GHz Full Power Input Bandwidth (-3dB)
  • True single core architecture (no calibration required)
  • External Interleaving:Full scale analog input Voltage Span 500mVpp
    • Gain Adjust
    • Offset Adjust
    • Sampling Delay Adjust
  • All front panel input/outputs are via MMCX:
    • Analog Input
    • Reference clock
    • Trig in/out
    • General purpose I/O
  • Super low phase noise RF PLL Synthesizer
View product FMC210 Data Sheet

FMC A/D D/A

( expand all )

FMC220

Dual 12-bit 1 GSPS ADC and 16-bit 6 GSPS DAC, FMC

FMC229

FMC Quad DAC 16-bit @ 2.8 GSPS with Quadrature Modulator

FMC250

FMC Dual ADC 12-bit 2.6 GSPS, Single DAC 16-bit 12 GSPS

FMC216

FMC ADC 12-bit @ 2.6 GSPS and DAC 14-bit @ 5.6 GSPS

FMC227

FMC Dual ADC, 12-bit @ 2.6 GSPS with single DAC 14-bit @ 5.7GSPS

FMC219

FMC High-speed Dual DAC 14-bit at 2.5 GSPS with Wide-band PLL on board

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

FMC211

FMC High-speed ADC 10-bit at 2.6 GSPS Module

FMC212

FMC Dual ADC 12-bit @ 1.5 GSPS, Dual DAC 16-bit @ 2.8 GSPS

FMC213

FMC Quad ADC 16-bit @ 250 MSPS, DAC 14-bit @ 5.7 GSPS

FMC215

FMC ADC 12-bit @ 4.0 GSPS, DAC 12-bit @ 4.5 GSPS

FMC218

FMC High-speed DAC 14-bit at 2.5 GSPS Module

FMC221

FMC DAC 14-bit @ 2.5 GSPS Module

FMC222

FMC Dual DAC 14-bit @ 2.5 GSPS Module

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

FMC224

FMC Quad DAC 16-bit @ 2.8 GSPS Module

FMC225

12-bit 4.0 GSPS ADC and 14-bit 5.7 GSPS DAC, FMC

FMC226

Dual ADC, 12-bit @ 4.0 GSPS, FMC

FMC228

Quad ADC 12-bit @ 1 GSPS, FMC

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

MicroTCA.4 AD/DA

( close )

MRT523

MicroTCA.4 RTM for AMC523, 12 Ch ADC 16-bit @ 125 MSPS

  • MicroTCA.4 RTM for the AMC523
  • Twelve channel ADC 16-bit @ 125 MSPS utilizing AD9653 device routed to AMC523
  • Two analog outputs from AMC523’s DACs Mezzanine
  • ADC and DAC signal routed through amezzanine
  • Three pairs of user defined digital IO
  • Double module, mid-size (full-size optional)
View product MRT523 Data Sheet

AMC523

μTCA.4 AMC, Dual DAC 16-Bit @ 250 MSPS

  • Dual DAC 16-bit @ 250 MSPS utilizing MAX5878 device (user programmable for lower sampling rate)
  • Xilinx Kintex-7 FPGA XC7K410T in FFG900 package
  • Supported by DAQ Series™ data acquisition software
  • 2 GB of DDR3 memory
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • x8 PCIe (or dual x4)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Quad SFP+ (up to 6.6 Gbps)
  • JTAG selectable front and backplane
  • AMC.1 and AMC.2 (FPGA programmable)
  • DC Coupled
View product AMC523 Data Sheet

AMC522

μTCA.4 AMC Dual DAC, 16-bit @ 500 MSPS

  • Dual channel MAX5878 DAC with 500 MSPS @16-bit resolution
  • Compliant to μTCA.4, double module, mid-size (fullsize optional) with rear I/O
  • Xilinx Kintex-7 FPGA
  • AMC.1, AMC.2, and AMC.4 compliant (FPGA programmable)
View product AMC522 Data Sheet

MRT522

MicroTCA.4 RTM for AMC522, 8 Ch ADC

  • MicroTCA.4 RTM for the AMC522
  • Double module, mid-size (full-size optional)
  • Two analog outputs from AMC522’s DACs via SSMC connectors
  • Eight analog inputs (AC or DC coupled) via SSMC connectors feeding on-board ADCs via programmable gain amplifiers
  • Clocks and Trigger In/Out accessible via dual high density DensiShield connectors
  • IPMI v2.0
  • RoHS compliant
View product MRT522 Data Sheet

MRT520

MicroTCA.4 RTM for AMC520

  • MicroTCA.4 RTM for the AMC520
  • Two analog outputs from AMC520’s DACs via SSMC connectors
  • Ten analog inputs (AC or DC coupled) interfacing directly with AMC520’s ADC ICs via SSMC connectors
  • Twelve LVDS signals and three differential reference clock routing to AMC520’s FPGA
  • LVDS and reference clocks accessible via dual high density DensiShield connectors
  • Double module, mid-size (full-size optional)
  • RoHS compliant
View product MRT520 Data Sheet

AMC521

24 Channels ADC, Mixed Sampling Rate

  • Sixteen channel of TI ADS42JB69 ADC 16-bit @ 250MSPS
  • Eight channel SAR TI ADS8568 ADC 16-bit @ 650 KSPS simultaneous
  • Interface to the FPGA is via JESD204B
  • 24 LVDS for Clock/Trig and/or GPIO
  • Virtex-7 FPGA 415T or 690T in FFG1158
View product AMC521 Data Sheet

CM044

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

  • Data Processing CoBo (Concentration Board) in AMC format
  • Double module, full-size compliant to MicroTCA.0
  • Virtex-5 FPGA (XC5VFX100T in FFG 1136 package)
  • 256 MB DDR3 DDR2 SDRAM and 32 MB Flash
  • Dual VHDCI, two dual-coax LEMO, and one micro USB connector via the front panel
  • Port 0 and Port 4 for GbE
  • Port 1 for GET Clocks
  • Ports 8-11 for GET Data
  • Activity and MGT LEDs
  • Slow/Fast control of ASIC ADC
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging
View product CM044 Data Sheet

CM045

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

  • Data Processing AMC in double module, mid-size (full-size optional)
  • Compliant to MicroTCA.4
  • Class D1.2 compatible
  • High-speed Kintex-7 FPGA
  • 16 GB DDR3 SDRAM
  • Octal SFP+ via the front panel
  • PCIe x4 Gen 3
  • Two channels of GbE
  • Ten direct low latency connections to backplane
  • Four low latency connections to RTM
  • LVDS parallel bus to RTM
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging
View product CM045 Data Sheet

AMC520

AMC 10-channel ADC, MicroTCA.4

  • Double module AMC, compliant to μTCA.4
  • Ten channel of ADC with 125MSPS @ 16-bit resolution utilizing AD9268 device
  • Dual DAC with 250 MSPS @ 16-bit resolution utilizing MAX5878 device (this is user programmable for lower sampling rate)
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • Backplane PCIe Dual x4 or x8/Dual GbE
  • Xilinx Virtex-6 FPGA in FF1759 package
  • Option for QDR-II+
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Dual SFP+ (up to 6.6Gbps)
  • JTAG selectable front and backplane
  • AMC.1 and AMC.2 (FPGA programmable)
View product AMC520 Data Sheet

MicroTCA.4 AD/DA

( expand all )

MRT523

MicroTCA.4 RTM for AMC523, 12 Ch ADC 16-bit @ 125 MSPS

AMC523

μTCA.4 AMC, Dual DAC 16-Bit @ 250 MSPS

AMC522

μTCA.4 AMC Dual DAC, 16-bit @ 500 MSPS

MRT522

MicroTCA.4 RTM for AMC522, 8 Ch ADC

MRT520

MicroTCA.4 RTM for AMC520

AMC521

24 Channels ADC, Mixed Sampling Rate

CM044

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

CM045

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

AMC520

AMC 10-channel ADC, MicroTCA.4

Platform A/D D/A

VT988

NEW

High speed 16 ADC at 3 GSPS with Synchronous Capture

  • Xilinx Virtex-7 XC7VX485T FPGA
  • NVidia Jetson TX1 System on Module
  • TI ADC08B3000 8-bit @ 3 GSPS
  • 16 ADC for synchronous capture
  • Managed Layer 2 GbE Switch
View product VT988 Data Sheet

Platform A/D D/A

( expand all )

VT988

High speed 16 ADC at 3 GSPS with Synchronous Capture