Development

VadaTech has developed a range of unique products to accelerate your development, simplify your testing and enable you and your customers to deploy smoothly. We have a range of AMCs to provide load testing, IPMI development and breakout for the clocks. VT072 enables a single AMC to be powered for testing and development.

AMC - Dev/Test Boards

( close )

AMC001

AMC Load Module

  • Single module, mid size or full size
  • 32-bit IPMI RISC processor
  • Up to 90W adjustable power load
  • True payload power request to the carrier (MCH/Shelf)
  • Front panel LED to indicate status and power consumption
  • Six temp sensors to monitor various on-board temperatures
  • All differential pairs routed for ease of access (loop back using zero ohms resistors)
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC001 Data Sheet

AMC002

AMC Telco/Fabric Clock Breakout

  • Single module, compact size (mid or full size option)
  • AMC v1 and AMC v2 clocking compliant
  • Selectable CLK1/TCLKA/TCLKC via SMB connector as input
  • Selectable CLK2/TCLKB/TCLKD via SMB connector as input
  • Selectable CLK1/TCLKA/TCLKC via SMB connector as output
  • Selectable CLK2/TCLKB/TCLKD via SMB connector as output
  • CLK3 (M-LVDS) or FCLKA (HCSL) option via SMB connector as output
  • Front panel clock transceiver enable switches
  • IPMI 2.0 compliant
  • HPM.1
  • RoHS compliant
View product AMC002 Data Sheet

VT072

Single Slot Backplane for AMC Modules

  • Single slot AMC backplane
  • Provides +12V and Management Power to the AMC Module
  • Port 0 and 1 are routed to the GbE PHY
  • Three M3 Mounting holes to mate to any frame size
  • RoHS compliant
View product VT072 Data Sheet

AMC - Dev/Test Boards

( expand all )

AMC001

AMC Load Module

AMC002

AMC Telco/Fabric Clock Breakout

VT072

Single Slot Backplane for AMC Modules

JTAG Switch Modules

UTC007

μTCA JTAG Switch Module (JSM)

  • JTAG Switch Module (JSM) per μTCA specification
  • Provides Transparent Communications between the Arbitrated Master and a selected Secondary Port
  • Mates directory to the Chassis that have the JSM connector
  • Support for 12 AMC, 2 MCH, 4 Power Module, 2 Cooling units and Front/Rear (21 Ports)
  • Operations via Front/Back, or the two MCH
  • Auto-detection of Port Presence
  • Three Arbitrated Master ports
  • Configuration Mode Uses IEEE 1149.1 TAP controller
  • Operation up to 50MHz
  • LED for Activity, Master Grant, Secondary port selection
View product UTC007 Data Sheet

UTC008

μTCA JTAG Switch Module (JSM)

  • JTAG Switch Module (JSM) per μTCA specification
  • Provides transparent communications between the arbitrated master and a selected secondary port
  • Mates directly to the chassis that have a JSM connector (standard compact-size AMC panel)
  • Supports up to 12 AMCs, 2 MCHs, 4 Power Modules, 2 Cooling Units and front/rear (21) ports
  • Operates via front/rear, or the 2 MCHs
  • Auto-detection of port presence
  • Three arbitrated master ports
  • Configuration mode uses IEEE 1149.1 TAP controller
  • Operation up to 50 MHz
  • LEDs for activity, master grant and secondary port selection
View product UTC008 Data Sheet

JTAG Switch Modules

( expand all )

UTC007

μTCA JTAG Switch Module (JSM)

UTC008

μTCA JTAG Switch Module (JSM)