Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

ATCA Shelf Manager/Node

LEGACY *
  • 32-bit RISC processor @ 180 MHz
  • 64 Mbytes of SDRAM
  • 128 Mbytes of flash
  • Firmware is field upgradable
    • w/ 2 boot flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • IPMI 2.0 compliant
  • Low power (2.2W)
  • RTC with 10 year battery life span
  • Runs as the Shelf Manager and/or Node
  • Each I2C bus has a 64-byte FIFO
  • Rich set of management software such as HPI, RMCP+, SNMP, CLI, HTTP, E-Keying, etc.

Download Datasheet Add to Info Request

add to compare
0

The VT001 incorporates the Intelligent Platform Management Interface (IPMI Version 2.0) and the PICMG 3.x specification on a mezzanine module. The VT001 provides a complete IPMI hardware and software solution in the size of a credit card and dissipates less than 2.2W.

The VT001 is deployed on management carriers (such as the VadaTech VT004, VT006 or VT007) for the rapid development of dedicated Shelf Managers. The VT001 can also be configured to run as a Shelf Manager on an ATCA module (such as the VadaTech ATC800, ATC120, ATC105, etc.). This allows the ATCA module itself to replace the dedicated Shelf Manager, thereby reducing overall system cost.

If configured as a Node (such as the VadaTech ATC104), it can manage up to 8 AMC modules .

The VT001 is mated to the host/carrier board through a dual source connector (Tyco/Samtec). A choice in connector height allows the flexibility to place components underneath the VT001.

Key Features
  • 32-bit RISC processor @ 180 MHz
  • 64 Mbytes of SDRAM
  • 128 Mbytes of flash
  • Firmware is field upgradable
    • w/ 2 boot flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • IPMI 2.0 compliant
  • Low power (2.2W)
  • RTC with 10 year battery life span
  • Runs as the Shelf Manager and/or Node
  • Each I2C bus has a 64-byte FIFO
  • Rich set of management software such as HPI, RMCP+, SNMP, CLI, HTTP, E-Keying, etc.
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT000

ATCA Power Module

  • Powers a single ATCA module
  • IPMI hardware address and parity
  • Fuse on each of the power rails
  • Enable switch
  • Connector for IPMI Bus A and B
  • Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
  • Test points
  • RoHS compliant
View product VT000 Data Sheet

VT830

6U ATCA SlotSaver Chassis

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh optional)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications