Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

Compatible to Intel® MPCMM0001

LEGACY *
  • Compatible to the Intel® MPCMM0001 
  • 5W max power
  • 32-bit RISC processor @ 180 MHz
  • 64 MB of SDRAM and 128 MB of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT005s in system
  • Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT005 can run as an IPMI protocol analyzer to monitor all the 40+ I2C Busses

Download Datasheet Add to Info Request

add to compare
0

VT005 Shelf Manger is form, fit and functionally compatible to the Intel® Model MPCMM0001. The VT005 is a 5W module. The VT005 can also run as a protocol analyzer to monitor, inject, capture and validate I2C traffic on the Intelligent Platform Management Bus (IPMB) on all the radial busses. A Graphical User Interface (GUI) validates and displays the IPMI packets or schedules IPMI messages for injection into the shelf. The GUI application communicates with the VT005 through the Ethernet port.

The VT005 has true radial bussing with dual FPGAs for redundancy. Each IPMI bus has a 64-byte FIFO to allow for a full IPMI packet on each I2C bus so there is no packet loss during operation.

When two VT005s are in the system, they operate in redundant active/standby mode. During operation one VT005 is active while the second one is synchronized in hot standby mode. The VT005 is fully hot-swappable to minimize service down time.

Key Features
  • Compatible to the Intel® MPCMM0001 
  • 5W max power
  • 32-bit RISC processor @ 180 MHz
  • 64 MB of SDRAM and 128 MB of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT005s in system
  • Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT005 can run as an IPMI protocol analyzer to monitor all the 40+ I2C Busses
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT000

ATCA Power Module

  • Powers a single ATCA module
  • IPMI hardware address and parity
  • Fuse on each of the power rails
  • Enable switch
  • Connector for IPMI Bus A and B
  • Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
  • Test points
  • RoHS compliant
View product VT000 Data Sheet

VT830

6U ATCA SlotSaver Chassis

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh optional)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications