Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

ATCA Rear Transition Module

  • PCIe expansion via rear panel with fiber
    • Provides expansion to another ATC103/104/105/106/107/108/109, AMC103 or PCI103 board •
  • One 10/100Mbit Ethernet port 
  • Management controller serial port
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The ART104 is a Rear Transition Module (RTM) that brings expandability to Vadatech’s ATC104 carrier board. The ART104 is a passive RTM that allows for Management 10/100Mbit Ethernet, Management RS-232 serial interface and PCIe x4 lanes for expansion.

The ART104 can seamlessly be connected to an additional ART104/ART103/ATC103/104/105/106/107/108/109, AMC103 or PCI103 modules to increase the number of I/O slots via a PCIe fiber or copper expansion interconnect.

Key Features
  • PCIe expansion via rear panel with fiber
    • Provides expansion to another ATC103/104/105/106/107/108/109, AMC103 or PCI103 board •
  • One 10/100Mbit Ethernet port 
  • Management controller serial port
  • RoHS compliant
Benefits
  • Full front ATCA board and compatible RTM solution available from VadaTech
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-levelexpertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

ATC808

Low Cost 26 Port ATCA Switch

  • AdvancedTCA open standard form factor
  • PICMG 3.1 compliant
  • Managed Layer 2 switch
  • GbE to Base Interface for 15 Node slots
    • plus two Shelf
  • One port to the update channel
  • Eight front panel SFP connectors for mix of Copper and Fiber interfaces
  • Support up to 8K MAC address
  • 4K IEEE 802.1Q VLANs
  • VLAN-based packet filtering
  • Packet classification using IEEE802.1p QoS
  • 9K Jumbo frames
  • Spanning tree, Mirroring, QoS
  • SNMP and RMON
  • OS support for:
    • OS independent
View product ATC808 Data Sheet

VT030

ATCA Switching Shelf Manager (SSM)

  • 10GbE Switching Shelf Manager
    • eliminates need for separate switch slots
  • Compliant to PICMG 3.0 base specs
  • Compliant to PICMG 3.1 fabric specs
  • Compact 1.0" H x 5.685" W x 11.096" D size
  • Octal 10GbE ports via SFP+
  • Dual GbE, 10/100 out-of-band, and RS-232 de-bug ports via RJ-45
  • Ten 10GbE ports routed to RTM for optional access
  • Software for Sensor Data Record, event logs, FRU inventory monitoring temp and power, e-keying, alarms and more
  • Unmatched front panel density, including LED indicators for Base, Fabric, SHMC, Reset, Power Fail, Standby, and more
  • Can run as an IPMI protocol analyzer to monitor the I2C busses.
  • IPMI 2.0 (or 1.5) compliant
  • Telco alarm with Micro DB15 connector front panel interface
  • Active/standby redundancy when utilizing two VT030 IMSs in a system
View product VT030 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.