Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

ATCA Carrier for PMC/XMC/PrPMC

LEGACY *
  • Four PMC, XMC or PrPMC sites
    • Dedicated PCI-X @ 133MHz per Module
    • PCIe x4 lanes for XMC
  • 32 lane PCIe switch
    • PCIe expansion via front panel with fiber or copper interface
    • Expansion to another ATC103 or to a AMC103, ATC104, ATC105, ATC106, ATC107, ATC108, or PCI103
  • An external host may configure the bus 
  • 17-port managed layer two GbE switch
  • PICMG 2.15 PMC/PrPMC 10/100/1000 Ethernet routed to the Gigabit switch
  • Allows the PCIe root complex to be on any PMC or external source via front panel or rear

 

Download Datasheet Add to Info Request

add to compare
0

The ATC103, integrates four PMC/XMC/PrPMC sites onto a single Advanced Telecommunication Computing Architecture (AdvancedTCA) node carrier. The ATC103 allows for integration of readily available PMC, XMC and PrPMC modules into the AdvancedTCA environment.

The ATC103 provides four sites that can accept any PMC, XMC or PrPMC module. The ATC103 brings three of the PMC J4 I/Os to the front panel. One of PMC J4 I/Os is routed to Zone 3 of the ATC103. For PMC modules that route their GbE to their J4 connector, the ATC103 routes these connections directly to the onboard GbE switch.

The module has a 32-lane PCIe switch divided into eight ports of x4 lanes each. The ATC103 can be connected to additional ATC103, ATC104, ATC105, ATC106, ATC107, or ATC108 carrier boards or the AMC103 or PCI103 to increase the number of I/O slots via PCIe fiber or copper expansion interconnects. This PCIe expansion is available through the front or the rear. 

The ATC103 can be configured as a Shelf Manager or a Node board. As a Shelf Manger, the ATC103 eliminates the need for other shelf managers resulting in reduced total system cost. 

Key Features
  • Four PMC, XMC or PrPMC sites
    • Dedicated PCI-X @ 133MHz per Module
    • PCIe x4 lanes for XMC
  • 32 lane PCIe switch
    • PCIe expansion via front panel with fiber or copper interface
    • Expansion to another ATC103 or to a AMC103, ATC104, ATC105, ATC106, ATC107, ATC108, or PCI103
  • An external host may configure the bus 
  • 17-port managed layer two GbE switch
  • PICMG 2.15 PMC/PrPMC 10/100/1000 Ethernet routed to the Gigabit switch
  • Allows the PCIe root complex to be on any PMC or external source via front panel or rear

 

Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ART115

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260,CP3220, VadaTech ATC114, etc.
  • Dual DVI/VGA interface
  • Resolution @ 1920x1200
  • Dual 10GbE SFP+
  • Removable on board 2.5” SAS/SATA Disk
  • Two port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45 or LC Fiber(option for SX or LX)
  • Front Blade Management RS-232 to RJ-45
  • Dual RS-232 for the host blade
  • IPMI 2.0 Management Controller
  • RoHS compliant
View product ART115 Data Sheet

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT830

6U ATCA SlotSaver Chassis

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh optional)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications