Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

DC Power Module, 396W or 792W

  • Single module, full size module per AMC.0
  • Dual -36VDC to -75VDC input, 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Blue, Red, Amber and Green LEDs
  • Field upgradable
  • IPMI 2.0 and HPM.1 compliant
  • Without the presence of an MCH the modules can be turned on
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT
  • Available in uTCA.3 Conduction Cooled version

Download Datasheet Add to Info Request

add to compare
0

The VadaTech UTC010 is a 792W power module (available in 396W) for use in a μTCA chassis. The power module runs at 95% efficiency when running at maximum load. This results in over 752W available to the system. It is fully compliant with the MicroTCA.0 revision 1.0 specification; including dual-redundant I2C buses (IPMB-0).

The UTC010 is hot-swappable and fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MCHs (MicroTCA Carrier Hubs) as well as the CUs (Cooling Units). Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault. Once installed in the system the firmware is upgradable via the shelf manager. The UTC010 can be configured to power and enable the modules without the presence of an MCH.

Key Features
  • Single module, full size module per AMC.0
  • Dual -36VDC to -75VDC input, 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Blue, Red, Amber and Green LEDs
  • Field upgradable
  • IPMI 2.0 and HPM.1 compliant
  • Without the presence of an MCH the modules can be turned on
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT
  • Available in uTCA.3 Conduction Cooled version
Benefits
  • Wide array of power module options from VadaTech
  • Modifiable to rugged conduction-cooled version
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC720

Xeon E3-1125 Processor AMC, PCIe

  • Intel® Xeon™ E3 processor
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • PCIe Gen2
    • Gen3 on v2 option
    • x4 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE to port 0 and 1 (AMC.2) and SATA to port 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16 GB of DDR3 w/ ECC and 32 GB Flash
  • Option for 32 GB SATA drive
  • Serial over LAN
  • IPMI 2.0 compliant
View product AMC720 Data Sheet

UTC002

MCH for μTCA Chassis

  • Single module, full size per AMC.0
  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • Layer 2 managed GbE to each AMC (optional)
  • SAS/SATA to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10 GbE (Layer 2 managed)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Linux 2.6 embedded OS
  • HPM.1 compliant
  • IPMI 2.0 compliant
  • RoHS compliant
View product UTC002 Data Sheet

VT857

1U uTCA Chassis, Deep, 12 AMC, 10GbE

  • Twelve mid-size single module AMC slots or six mid-size double module AMC slots
  • Cascade any number of 1U Carriers for expansion and management
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • AMC.2 and AMC.3 compliant
  • Fabric Expansion to other 1U chassis
  • 10GbE available on ports 4-7 and 8-11
  • GbE Managed Layer Two (ports 0 and 1)
  • Telco Alarm and Carrier Locator
  • JTAG Switch Module (JSM) with front port access
  • Telecom/GPS Clock on TCLKA, TCLKB, TCLKC and TCLKD and Fabric Clock on FCLK
  • Redundant 1+1 Power supply
  • Redundant Cooling Units (CU)
  • Removable Power supply, Air Filter and Fan Trays
View product VT857 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.