Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

AMC FPGA Carrier for FMC, Virtex-5

  • AMC FPGA carrier for FPGA Mezzanine Card (FMC) per VITA-57
  • Xilinx Virtex-5 FPGA in FF1136 package
  • Up to 512 MB of FPGA DDR2 memory
  • AMC Ports 4-7 and 8-11 routed to FPGA per AMC.1, AMC.2 and AMC.4 (FPGA programmable per protocol such as PCIe, 10 GbE or SRIO)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed

Download Datasheet Add to Info Request

add to compare
0

The AMC512 is an AMC FPGA Carrier with an FMC (VITA 57) interface. The AMC512 is compliant to the AMC.1, AMC.2, AMC.3 and/or AMC.4 specification. The unit has an on-board, re-configurable FPGA which interfaces directly to AMC FCLKA, TCLKA-D, FMC DP0-3, and all FMC LA/HA/HB pairs. The FPGA interfaces to dual bank of DDR2 memory (32-bit wide) for a total of 512MB. This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.

The AMC512 has a single FMC connector per VITA-57 allowing the versatility of various FMC modules to be implemented.

Key Features
  • AMC FPGA carrier for FPGA Mezzanine Card (FMC) per VITA-57
  • Xilinx Virtex-5 FPGA in FF1136 package
  • Up to 512 MB of FPGA DDR2 memory
  • AMC Ports 4-7 and 8-11 routed to FPGA per AMC.1, AMC.2 and AMC.4 (FPGA programmable per protocol such as PCIe, 10 GbE or SRIO)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
Benefits
  • Various Xilinx Virtex-5 FX/LX and SX FPGAs available
  • Dual bank of DDR2 memory allows larger buffer sizes while processing and queuing data to the host
  • The LVDS cross-bar switch provides improved clock flexibility
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC534

AMC Stratix V FPGA, 100G

  • Altera Stratix V GT FPGA in FFG-1517 package
  • Dual zQSFP+ ports to the front panel
  • Front panel Port 0 at 100G, Port 1 at up to 40G
  • AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, XLAUI, etc. are FPGA programmable)
  • On-board Freescale QorIQ PPC2040 with DDR3
  • FPGA can load via Flash or via the P2040
  • FPGA Flash can be programmed via the JTAG or the P2040
  • IPMI 2.0 compliant
View product AMC534 Data Sheet

FMC108

FMC Dual QSFP+ for 10 GbE/40GbE/SRIO PCIE/40Gb InfiniBand/AURORA

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single module
  • Two QSPF+ cages for 10GbE/SRIO/PCIE and Aurora
  • Re-driver on both ports for a better signal quality
View product FMC108 Data Sheet

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single ADC EV10AS150B @2.5 GSPS
  • Single module
  • 5 GHz Full Power Input Bandwidth (-3dB)
  • True single core architecture (no calibration required)
  • External Interleaving:Full scale analog input Voltage Span 500mVpp
    • Gain Adjust
    • Offset Adjust
    • Sampling Delay Adjust
  • All front panel input/outputs are via MMCX:
    • Analog Input
    • Reference clock
    • Trig in/out
    • General purpose I/O
  • Super low phase noise RF PLL Synthesizer
View product FMC210 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.