Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

  • Data Processing CoBo (Concentration Board) in AMC format
  • Double module, full-size compliant to MicroTCA.0
  • Virtex-5 FPGA (XC5VFX100T in FFG 1136 package)
  • 256 MB DDR3 DDR2 SDRAM and 32 MB Flash
  • Dual VHDCI, two dual-coax LEMO, and one micro USB connector via the front panel
  • Port 0 and Port 4 for GbE
  • Port 1 for GET Clocks
  • Ports 8-11 for GET Data
  • Activity and MGT LEDs
  • Slow/Fast control of ASIC ADC
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging

Download Datasheet Add to Info Request

add to compare
0

The CM044 AMC-based Concentration Board (CoBo) is a high-performance data processor designed according to the PICMG MTCA.0 specifications. The board is targeted for General Electronics (GET) for Time Projection Chamber (TPC) project.  The AMC module intelligently reads, reduces and concentrates the high data throughput of TPC detectors.  The CoBo AMC interfaces to external ASIC ADCs, timing boards, controller and storage farms.  The module comes in the double module, full-size AMC format with 1GbE on ports 0, 4.  Port 1 is used for GET Clocks and Ports 8-11 are used for GET Data.

Key Features
  • Data Processing CoBo (Concentration Board) in AMC format
  • Double module, full-size compliant to MicroTCA.0
  • Virtex-5 FPGA (XC5VFX100T in FFG 1136 package)
  • 256 MB DDR3 DDR2 SDRAM and 32 MB Flash
  • Dual VHDCI, two dual-coax LEMO, and one micro USB connector via the front panel
  • Port 0 and Port 4 for GbE
  • Port 1 for GET Clocks
  • Ports 8-11 for GET Data
  • Activity and MGT LEDs
  • Slow/Fast control of ASIC ADC
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging
Benefits
  • Data processing performance of Virtex-5 FPGA with ASIC A/D converter
  • Electrical, mechanical, software, and system-level  expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

UTC002

MCH for μTCA Chassis

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10 GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 396W or 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in uTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Field upgradable
  • Modules can be turned on without an MCH in thesystem
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT
View product UTC010 Data Sheet

VT893

7U uTCA Chassis, 11 AMC Full Size, 2 PM

  • 7U μTCA System Platform
  • 19” x 7U x 10.5” deep (with handles 12” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and dual Power Modules
  • Up to twelve AMCs: 11 full size double module
  • Radial I2C bus to each AMC
  • Dual Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • 1000W AC Power supply option
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESDJack at the top front
View product VT893 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.