Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

DC Power Module, 241W or 460W, Double Module

  • Double module, full-size per AMC.0
  • 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
  • Support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Field upgradable
  • IPMI 2.0 compliant
  • HPM.1 compliant
  • Modules can be turned on without the presence of an MCH
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT

Download Datasheet Add to Info Request

add to compare
0

The VadaTech UTC023/UTC023C is a 241/460W power module for use in a μTCA chassis. The power module runs at 84% efficiency when running at maximum load. This results in200/400W output (available to the system). It is fully compliant with the MicroTCA.0 and MicroTCA.1 specifications; including dual-redundant I2C buses (IPMB-0).

The UTC023/UTC023C is fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MCHs (MicroTCA Carrier Hubs) as well as the CUs.

Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault. The firmware is upgradable via HPM.

The module is available in conduction cooled variant for harsh environments.

Key Features
  • Double module, full-size per AMC.0
  • 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
  • Support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Field upgradable
  • IPMI 2.0 compliant
  • HPM.1 compliant
  • Modules can be turned on without the presence of an MCH
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT
Benefits
  • Very low ripple voltage
  • Support for power module redundancy
  • Efficient re-use of existing designs/components reduce costs
  • Electrical, mechanical, software and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, speciality modules, and test/dev product from one source
Specifications
Specifications

Block diagram

Related Products

AMC720

Xeon E3-1125 Processor AMC, PCIe

  • Intel® Xeon™ E3 processor
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • PCIe Gen2
    • Gen3 on v2 option
    • x4 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE to port 0 and 1 (AMC.2) and SATA to port 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16 GB of DDR3 w/ ECC and 32 GB Flash
  • Option for 32 GB SATA drive
  • Serial over LAN
  • IPMI 2.0 compliant
View product AMC720 Data Sheet

UTC004

MCH for μTCA Chassis (3rd generation)

  • Single module, full size per AMC.0
  • Unified 1GHz quad-core CPU for MCMC (MicroTCA Carrier Management Controller), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC004s
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 3 managed Ethernet switches
  • Non-blocking PCIe Gen 3, SRIO Gen 2, 10GbE/40GbE, or Crossbar Switch option to AMC fat pipes with options for up to 40GbE uplink
  • Low-jitter M-LVDS clock distribution crossbar matrix
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
View product UTC004 Data Sheet

VT811

8U uTCA.4 Chassis Platform

  • uTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
  • Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane
  • Redundant FRU information devices and carrier locator
  • Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT811 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.