Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

300 MHz to 6 GHz Octal Versatile Wideband Transceiver (MIMO), UltraScale™ AMC

  • Xilinx UltraScale™ XCKU115 FPGA
  • Octo complete transceiver signal chain solution
  • Based on quad Analog Devices AD9371
  • Frequency range 300 MHz to 6 GHz
  • Tx synthesis bandwidth (BW) to 250 MHz
  • Rx bandwidth: 8 MHz to 100 MHz
  • Supports Time Division Duplex (TDD) and Frequency Division Duplex (FDD) operation
  • On-board clocking or external clock with multi-transceivers synchronization capability
  • Three banks of DDR-4 for total 20 GB

Download Datasheet Add to Info Request

add to compare
0

The AMC597 is a wideband transceiver in AMC form factor. The AMC utilizes four AD9371 connected to a Kintex UltraScale™ FPGA providing eight transceivers channels making it suitable for signal SDR, BTS, antenna systems, research and instrumentation.

The on-board re-configurable UltraScale™ XCKU115 FPGA interfaces via JESD204B directly to wideband transceivers. The FPGA has interface to three banks of DDR4 memory. This allows for maximum buffer sizes to be stored during processing as well as for queuing the data to the host.

Key Features
  • Xilinx UltraScale™ XCKU115 FPGA
  • Octo complete transceiver signal chain solution
  • Based on quad Analog Devices AD9371
  • Frequency range 300 MHz to 6 GHz
  • Tx synthesis bandwidth (BW) to 250 MHz
  • Rx bandwidth: 8 MHz to 100 MHz
  • Supports Time Division Duplex (TDD) and Frequency Division Duplex (FDD) operation
  • On-board clocking or external clock with multi-transceivers synchronization capability
  • Three banks of DDR-4 for total 20 GB
Benefits
  • High density transceiver with intensive data processing capability
  • Flexible clocking
  • Observation channels for implementation of error correction functions
  • Sniffer Receiver channels can monitor different frequency bands
  • DDR-4 memory for high-bandwidth storage
Specifications
Specifications

Block diagram

Related Products

AMC599

AMC Dual ADC @ 6.4 GSPS and Dual DAC @ 12 GSPS

  • Xilinx UltraScale™ XCKU115 FPGA
  • Dual ADC @ 6.4 GSPS 12-bits or quad ADC at 3.2 GSPS
  • Dual DAC (AD9162 or AD9164) @ 12 GSPS 16-bits
  • Two banks of 64-bit wide and a single bank of 32-bit wide DDR-4 for a total of 20 GB
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC599 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking or external clock with multi-cards ynchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VT951

1U Rugged Chassis Platform, 6 AMC Slots, PCIe Gen 3

  • MicroTCA rugged 1U 19” rackmount chassis platform
  • Designed to meet MIL-STD-810F, MIL-STD-901D for shock/vibration
  • Designed to meet MIL-STD-461E for EMI
  • Supports up to six single module mid-size
  • Dual x4 or single x8 PCIe Gen 3
  • Chassis accepts AMCs with single retention screw opposite of ejector handle on each slot
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • Dual redundant PSUs located in the rear of the chassis
  • AMC.1, AMC.2, AMC.3 and AMC.4 compliant
  • Front-to-back cooling
  • Lightweight aluminum construction
  • RoHS compliant
View product VT951 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.