Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

Zynq UltraScale+ FPGA, FMC Carrier, AMC

  • Xilinx UltraScale+ XCZU15EG FPGA 
  • Single FMC site
  • 8 GB of 64-bit wide DDR-4 Memory (single bank) with ECC
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash

Download Datasheet Add to Info Request

add to compare
0

The AMC581 is an AMC FPGA Carrier with single FMC (VITA-57) interfaces. The AMC is compliant to AMC.1, AMC.2 and AMC.4 specifications. The unit has an on-board, re-configurable FPGA which interfaces directly to the AMC FCLKA, TCLKA-D, FMC DP0-9 and all FMC LA/HA/HB pairs.

The FPGA has interface to a single DDR4 memory channel (64-bit wide). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.

The AMC is based on Xilinx UltraScale+ XCZU15EG MPSoC FPGA with single FMC site. The FPGA has 3528 DSP Slices and 746k logic cells. The XCZU15EG includes quad-core ARM application processor, dual-core ARM real-time processor and Mali™ graphics processing unit, as well as over 26 Mb of block RAM and 31 Mb of UltraRAM.

The module has on board 64 GB of Flash, 128 MB of boot flash and an SD Card as an option.

Key Features
  • Xilinx UltraScale+ XCZU15EG FPGA 
  • Single FMC site
  • 8 GB of 64-bit wide DDR-4 Memory (single bank) with ECC
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
Benefits
  • FMC site on a single module AMC
  • Zynq UltraScale+ MPSoC
  • Electrical, mechanical, software, and system level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC592

Kintex UltraScale FPGA Carrier for FMC, AMC

  • AMC FPGA carrier for FMC per VITA-57
  • Xilinx UltraScale™ XCKU115 FPGA
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Two banks of 64-bit wide and a single bank of 32-bitwide DDR-4 for a total of 20GB
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Clock jitter cleaner
  • Single module, mid-size AMC (full-size optional)
  • IPMI 2.0 compliant
View product AMC592 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking or external clock with multi-cards ynchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VT813

8U uTCA.4 Chassis Platform, (3+1) 4400W

  • μTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
  • Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane (40GbE ready)
  • Redundant FRU information devices and carrier locators
  • Four 1.1 kW AC Power supply for 4.4 kW total
  • Telco aarm
  • FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front and back
View product VT813 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.