Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

AMC Quad-Port 10GbE with SFP+

  • AMC.1 compliant
  • PCIe Gen2 x8 lanes
  • Quad SFP+
  • 10Gb/s full duplex bandwidth
  • TCP Segmentation off load: up to 256KB
  • Jumbo Frames of up to 15.5KB
  • IPV6 Support for IP/TCP
  • Dynamic Interrupt moderation
  • Eight VLAN L2 Filters
  • 16 Flex L3 Port Filters
  • Four L3 Address Filters (IPV4)
  • Four L3 Address Filters (IPV6)
  • IEEE P802.1AE LinkSec
  • OS support for:
    • Linux
    • Windows
    • Solaris

Download Datasheet Add to Info Request

add to compare
0

The AMC231 is a single module, mid size AdvancedMCTM (AMC) based on the AMC.1 specification (full size option available). The AMC231 provides Quad 10 Gigabit Ethernet via front panel SFP+. The AMC231 supports IEEE802.1AE LinkSec Specifications.The module can off-load IPsec for up to 1024 Security Associations (SA) for each TX and RX. The AMC231 provide wire speed Quad-port 10GbE throughput.The module reduces end-to-end latency for high priority traffic. In order to enhance the CPU utilization, the module supports Receive Side Coalescing (RSC).The AMC231 supports the IEEE P802.1AE LinkSec specification. It incorporates an in-line packet crypto unit, off-load IPSec for up to 1024 Security Associations (SA), AH and ESP protocols for authentication and encryption, AES-128-GMAC and AES-128-GCM.

Key Features
  • AMC.1 compliant
  • PCIe Gen2 x8 lanes
  • Quad SFP+
  • 10Gb/s full duplex bandwidth
  • TCP Segmentation off load: up to 256KB
  • Jumbo Frames of up to 15.5KB
  • IPV6 Support for IP/TCP
  • Dynamic Interrupt moderation
  • Eight VLAN L2 Filters
  • 16 Flex L3 Port Filters
  • Four L3 Address Filters (IPV4)
  • Four L3 Address Filters (IPV6)
  • IEEE P802.1AE LinkSec
  • OS support for:
    • Linux
    • Windows
    • Solaris
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC610

AMC 4 Port Gigabit Ethernet with 2.5” Disk

  • AMC.1 and AMC.3
  • Single-width, mid size (option for full size)
  • 4 Gigabit Ethernet ports via RJ-45
  • On board 2.5” disk with direct connect toPorts 2 and 3
  • PCIe Gen2 x4 lanes to Ports 4-7
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC610 Data Sheet

UTC002

MCH for μTCA Chassis

  • Single module, full size per AMC.0
  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • Layer 2 managed GbE to each AMC (optional)
  • SAS/SATA to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10 GbE (Layer 2 managed)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Linux 2.6 embedded OS
  • HPM.1 compliant
  • IPMI 2.0 compliant
  • RoHS compliant
View product UTC002 Data Sheet

UTC010

DC Power Module, 396W or 792W

  • Single module, full size module per AMC.0
  • Dual -36VDC to -75VDC input, 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Blue, Red, Amber and Green LEDs
  • Field upgradable
  • IPMI 2.0 and HPM.1 compliant
  • Without the presence of an MCH the modules can be turned on
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT
  • Available in uTCA.3 Conduction Cooled version
View product UTC010 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.