Search results

21 results match your query "SEARCH".
1.
Product  AMC597

The AMC597 is a wideband transceiver in AMC form factor. The AMC utilizes four AD9371 connected to a Kintex UltraScale™ FPGA providing eight transceivers channels making it suitable for signal SDR, BTS, antenna systems, research and instrumentation. The on-board re-configurable UltraScale™ XCKU115 FPGA...   

2.
Product  VPX597

The VPX597 is a wideband transceiver in 3U VPX form factor. The unit consists of four AD9371 connected to a Kintex UltraScale™ FPGA providing eight transceivers channels making it suitable for signal SDR, BTS, antenna systems, research and instrumentation. The on-board re-configurable UltraScale™...   

3.
Product  MZ523B

The MZ523B is a mezzanine module for VadaTech’s MRT523. The AMC/MRT523 combination provides 12-channel ADC 16-bit @ 125 MSPS, and this mezzanine routes analog inputs to the ADC. The MZ523B provides user-programmable selection, per channel, of AC or DC coupling andinput gain. The user can set these parameters...   

4.
Product  MZ523A

The MZ523A is a mezzanine module for VadaTech’s MRT523. The AMC/MRT523 combination provides 12-channel ADC 16-bit @ 125 MSPS, and this mezzanine routes analog inputs to the ADC. The MZ523A is intended primarily for system development/evaluation purposes. It provides no buffering or limiting of the input...   

5.
Product  AMC526

The AMC526 provides dual-channel ADC with sample rates up to 2.6 GSPS, making it suitable for signal capture/analysis applications such as COMINT/SIGINT, radar, research and instrumentation. The on-board Virtex-7 690T is suitable for local signal processing and data reduction prior to transfer out via the backplane...   

6.
Product  AMC629

The AMC629 is an integrated RAID with a Host Bus Adapter for SATA III or SAS-3 drives located in other slots and routed across the backplane, supporting integrated RAID 0 (striping),1 (mirroring), 1E, and 10 (mirroring and block-level striping). This makes it suitable for use with high-performance SSD modules to...   

7.
Product  FMC215

The FMC215 is an FPGA Mezzanine Module per VITA 57 specification that provides a single ADC at 4 GSPS and a single DAC at 4.5 GSPS. The module is suitable for signal capture and low-latency feedback applications such as COMINT/SIGINT, radar, jamming, research and instrumentation. The FMC215 utilizes TI ADC12J4000...   

8.
Product  AMC599

The AMC599 provides dual-channel ADC with sample rates of up to 6.4 GSPS at 12-bits (or quad inputs at 3.2 GSPS) and a dual DAC (Analog Devices AD9162 or AD9164) update rate of up to 12 GSPS and direct RF synthesis at 6 GSPS at 16-bits making it suitable for signal capture/analysis applications such as COMINT/SIGINT,...   

9.
Product  DAQ523

The DAQ523 is a digitizer sub-system in MTCA.4 form factor, comprising an FPGA AMC, an ADC rear transition module, and full software/firmware complete with DMA engine and EPICS support. The equipment can be operated from a simple user-level API, via a development API, or via EPICS. The user interface is consistent...   

10.
Product  AMC631C

The AMC631C is an integrated RAID with a Host Bus Adapter for SATA III or SAS-3 drives located in other slots and routed across the backplane, supporting integrated RAID 0 (striping), 1 (mirroring), 1E, and 10 (mirroring and block-level striping). This makes it suitable for use with high-performance SSD modules to...   

11.
Product  VPX599

The VPX599 provides dual-channel ADC with sample rates of up to 6.4 GSPS at 12-bits and a dual DAC update rate of up to 12 GSPS and direct RF synthesis at 6 GSPS at 16-bits making it suitable for signal capture/analysis applications such as COMINT/SIGINT, radar, research and instrumentation. The unit has an...   

12.
Product  MZ523C

The MZ523C is a mezzanine module for VadaTech’s MRT523. The AMC/MRT523 combination provides 12-channel ADC 16-bit @ 125 MSPS. This mezzanine provides 12 optical detectors with low-noise and high linearity amplifiers, routing detected signals to the ADCs. The MZ523C provides user-programmable selection, per...   

12.
Product Categories  Research/Physics
13.

The high energy physics community is adopting MicroTCA (MTCA) architecture, specifically MicroTCA.4, for a range of particle physics applications in research institutions, laboratories and educational organizations worldwide.     A major goal for high energy physics users is interoperability...   

14.

  VadaTech is a world leader in the design and manufacture of embedded computing solutions.  The products include configurable application-ready systems and their building blocks of boards, chassis and enabling software.     Based on a unique combination of electrical, mechanical,...   

15.

 Communication/Cloud Computing Case Studies  Network Security One of our customers in network security approached VadaTech to provide the platform for their next generation security appliance. To meet the specific requirements we designed a custom AMC carrier for them, supporting increased...   

16.

VadaTech has entered into a licensing agreement with DESY to manufacture MicroTCA.4 product. DESY is a research center of the Helmholtz Association, providing research and product solutions for the Photon Science, Accelerator and High Energy Physics communities.   

17.

Storage is one of those system elements where demands continue to rise whatever the application. Whether it’s the massive data gathered from electronic surveillance in military and homeland security, or a data log and history record for networking and research applications, the need to have modular and scalable...   

18.

A world-renowned research institute recognized a need to upgrade their plasma control system. After approach VadaTech with a list of innovative specifications,┬áVadaTech designed the AMC523 andMRT523 for the MicroTCA.4 chassis.   

19.

VadaTech, together with integration partner Emcomo Solutions AG, will present innovations in MicroTCA at the 5th MicroTCA Workshop for industry and research taking place at DESY in Hamburg, Germany on 7th and 8th December.   

21.

The main topics of this workshop are Applications in research facilities, Applications in industry, New products, Interoperability - further developments, and Software for MTCA.4.