FPGA, Quad Channel ADC 180 MSPS

  • Four channel LTC2209 ADC 180 MSPS @ 16-bit resolution
  • Xilinx Virtex-5 FPGA in FF1136 package
  • PCIe x4 or x8, GbE (FPGA programmable)
  • Aurora/SRIO option on lanes 8 to 11 if the PCIe x8 is not utilized

Download Datasheet Add to Info Request

add to compare
0

AMC511 is a Quad ADC (Analog to Digital Converter) module compliant to the AMC.1* and AMC.2 specification. The unit has an on-board, re-configurable FPGA which interfaces directly to the GbE or PCIe bus. The FPGA has an interface to the QDR-II memory (36 and 72-bit wide). This allows for largebuffer sizes to be stored during processing as well as for queuing the data to the host. The AMC511 allows for external clocking as well as internal clocking. The clock goes through an on-board PLL forbuffering/multiplying and jitter cleaner.

The AMC511 has a Trig in/out signal. Each input/output is via an SMB style connector and each of the ADC single ended inputs are converted to differential. The FPGA interfaces directly to the AMC per AMC.1 and/or AMC.2. These interfaces allow customers to use the core to interface to the host with multiple protocols*.*Default configuration is AMC.1 x4 with GbE.

Default configuration is AMC.1 x4 with GbE.

Key Features
  • Four channel LTC2209 ADC 180 MSPS @ 16-bit resolution
  • Xilinx Virtex-5 FPGA in FF1136 package
  • PCIe x4 or x8, GbE (FPGA programmable)
  • Aurora/SRIO option on lanes 8 to 11 if the PCIe x8 is not utilized
Benefits
  • Quad channel ADC reconfigurable FPGA at 180 MSPS
  • Design utilizes proven VadaTech subcomponents andengineering technique
  • Electrical, mechanical, software, and system-levelexpertise in house
  • Full ecosystem of front and rear boards, enclosures, specialtymodules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

VT857

1U uTCA Chassis, Deep, 12 AMC, 10GbE

  • Twelve mid-size single module AMC slots or six mid-size double module AMC slots
  • Cascade any number of 1U Carriers for expansion and management
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • AMC.2 and AMC.3 compliant
  • Fabric Expansion to other 1U chassis
  • 10GbE available on ports 4-7 and 8-11
  • GbE Managed Layer Two (ports 0 and 1)
  • Telco Alarm and Carrier Locator
  • JTAG Switch Module (JSM) with front port access
  • Telecom/GPS Clock on TCLKA, TCLKB, TCLKC and TCLKD and Fabric Clock on FCLK
  • Redundant 1+1 Power supply
  • Redundant Cooling Units (CU)
  • Removable Power supply, Air Filter and Fan Trays
View product VT857 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.