AMC517

Kintex-7 FPGA Carrier for FMC, AMC

  •  AMC FPGA carrier for FMC per VITA 57
  • Xilinx Kintex-7 410T FPGA in FFG-900 package with optional P2040
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Single module, mid-size AMC (full-size optional)
  • Clock jitter cleaner
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC517 is an AMC FPGA Carrier for FMC per VITA 57 and is compliant to AMC.1, AMC.2 and/or AMC.4 specification. The unit has an onboard, re-configurable FPGA which interfaces directly to the AMC FCLKA, TCLKA-D, FMC DP0-7 and all FMC LA/HA/HB pairs. The FPGA has interfaces to two DDR3 memory channels (64-bit wide and 16-bit wide). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host. With a FMC site per VITA 57, each AMC517 in the system has a whole array of mezzanine options available in the marketplace.

The onboard quad-core PPC can runs at 1.2 GHz with 2 GB of DDR3, 128 GB of Boot Flash, and a 32 GB SD Card. The PPC has dual 1000Base-X Ethernet interfaces to the FPGA in addition to its local bus. The PPC and FPGA route GbE to the Port 0 and 1 via a mux selection.

See Synchronized DAQ for a description of how phase coherent acquisition can be achieved using this product.

 

Key Features
  •  AMC FPGA carrier for FMC per VITA 57
  • Xilinx Kintex-7 410T FPGA in FFG-900 package with optional P2040
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Single module, mid-size AMC (full-size optional)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
Benefits
  • Distributed processing with local P2040 processor provides more reliability, performance and eliminates a potential single-point-of-failure in the system
  • The cross-bar switch LVDS provides superior clocking results
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from the industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.