1U uTCA Chassis, 2 AMC Economic (Full size or 8HP Option)

  • Two full size (or two mid size) AMC slots
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • AMC.1, AMC.2, AMC.3, AMC.4 compliant
  • Direct connect across the two AMC slots on ports 4-7 and 8-11 (any protocol could run such as PCIe, SRIO, 10GbE, Aurora, etc.)
  • GbE switch (not managed)
  • Removable dual 2.5” SATA/SAS disk with direct connect via SATA/SAS (port 2 or 3) or PCIe (port 4)
  • RAID zero or one option
  • Telco Alarm and Carrier Locator
  • Cooling is front to back with removable Air Filter and Fan Trays
  • Removable AC or DC input option
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare
0

The VT856 is a 1U μTCA chassis that provides two full-height or two mid-height slots with direct connection between the two slots on ports 4-7, 8-11, 12-15 and 17-20. The ports 2-3 are routed directed between the two slots or to dual 2.5” disk. The AMC.2 (ports 0 and 1) are routed to the on board GbE switch.

The Air Filter and Fan Trays are hot swappable. The VT856 has option for AC or DC input. The power supply is removable for ease of service.

The VT856 has Dual 2.5” SATA/SAS disk that are removable from the rear. The dual disk could run as dual independent disk or as RAID zero/one. The Disk interfaces to the AMC slots via the PCIe Gen2 (Gne1) or direct connect via ports 2 and 3 of the AMC.

The VT856 runs VadaTech proven second generation Management software based on it’s VT002 product. The shelf manager implements IPMI management, FRU management,and shelf environment management for power, thermal, E-keying, etc. The VT002 can run as the Shelf/MCMC or MCMC.

The input power is universal AC (110-240VAC) or from DC (-36V to -75V).

Key Features
  • Two full size (or two mid size) AMC slots
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • AMC.1, AMC.2, AMC.3, AMC.4 compliant
  • Direct connect across the two AMC slots on ports 4-7 and 8-11 (any protocol could run such as PCIe, SRIO, 10GbE, Aurora, etc.)
  • GbE switch (not managed)
  • Removable dual 2.5” SATA/SAS disk with direct connect via SATA/SAS (port 2 or 3) or PCIe (port 4)
  • RAID zero or one option
  • Telco Alarm and Carrier Locator
  • Cooling is front to back with removable Air Filter and Fan Trays
  • Removable AC or DC input option
  • IPMI 2.0 compliant
Benefits
  • Low cost 2-slot chassis ideal for prototyping/development
  • Utilizes VadaTech’s proven 2nd generation shelf manager
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC720

Xeon E3-1125 Processor AMC, PCIe

  • Intel® Xeon™ E3 processor
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • PCIe Gen2
    • Gen3 on v2 option
    • x4 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE to port 0 and 1 (AMC.2) and SATA to port 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16 GB of DDR3 w/ ECC and 32 GB Flash
  • Option for 32 GB SATA drive
  • Serial over LAN
  • IPMI 2.0 compliant
View product AMC720 Data Sheet

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.