FPGA Carrier with FMC Interface, 6U VPX

  • VPX (VITA 46) FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 57
  • VPX514 only takes power from the VPX chassis (there are no other interfaces going to the back plane)
  • Dual 10GbE via SFP+ interfaces
  • Xilinx Virtex-6 FPGA in FF1759 package
  • Onboard PLL for buffering/multiplying and jitter cleaner
  • Option for up to 4GB of DDR-III memory
  • Onboard Freescale QorIQ PPC1020 with DDR3

Download Datasheet Add to Info Request

add to compare
0

The VPX514 is an VPX FPGA Carrier with an FMC (VITA 57) interface. The VPX514 is compliant to the VPX VITA 46 specification. The FPGA has an interface to four banks of DDR3 memory (32-bit wide). This enables large buffer sizes to be stored during processing as well as for queuing the data to the host.

The unit has a single FMC connector (VITA 57) that enables multiple/different FMC modules in the system.

The onboard PPC can run at 800 MHz with 512 MB of DDR3, 8MB of boot flash and 128 MB of user Flash.The PPC has an x4 PCIe interface to the FPGA in addition to it’s local bus. The PPC has it’s dual GbE routed to ports 0 and 1 of the VPX.

Key Features
  • VPX (VITA 46) FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 57
  • VPX514 only takes power from the VPX chassis (there are no other interfaces going to the back plane)
  • Dual 10GbE via SFP+ interfaces
  • Xilinx Virtex-6 FPGA in FF1759 package
  • Onboard PLL for buffering/multiplying and jitter cleaner
  • Option for up to 4GB of DDR-III memory
  • Onboard Freescale QorIQ PPC1020 with DDR3
Benefits
  • Option for up to 4 GB of DDR3 memory
  • Reference design with VHDL source code speeds application development
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT000

ATCA Power Module

  • Powers a single ATCA module
  • IPMI hardware address and parity
  • Fuse on each of the power rails
  • Enable switch
  • Connector for IPMI Bus A and B
  • Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
  • Test points
  • RoHS compliant
View product VT000 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.