AMC593

FPGA Carrier with Dual FMC, Kintex UltraScale™ XCKU115 with P2040, AMC

  • Double module, mid-size AMC (full-size optional)
  • Xilinx UltraScale™ Kintex XCKU115 QorIQ PPC2040
  • AMC Ports 4-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO,10GbE, 40GbE, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • 8GB of DDR4 Memory (dual banks)

Download Datasheet Add to Info Request

add to compare
0

The AMC593 provides a very capable I/O processing engine, with a large UltraScale™ FPGA coupled to two FMC sites and supported by an onboard quad-core processor. Withover 5,500 DSP slices and supported by 8 GB of DDR4 (32-bits wide over two banks), the XCKU115 connects to all FMC LA/HA/HB pairs, balancing high-speed I/O with impressiveprocessing power. The AMC593 is compliant to the AMC.1, AMC.2 and/or AMC.4 specification, and supports direct AMC-to-AMC connections over ports 12-15 and 17-20.

The dual FMC sites accept FMCs from VadaTech’s extensive range of data acquisition,networking and RF units, and other 3rd party VITA 57 compliant modules.

The quad core P2040 onboard host has 4x PCIe interface to the FPGA in addition to its local bus, and is supported by DDR3, Boot Flash and a SD Card. The user can select whether to route ports 0 and 1 of the AMC to the PPC or FPGA.

The AMC593 has Serial Over LAN (SOL) per IPMI specification, with a hardware RNG for secure session.

Key Features
  • Double module, mid-size AMC (full-size optional)
  • Xilinx UltraScale™ Kintex XCKU115 QorIQ PPC2040
  • AMC Ports 4-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO,10GbE, 40GbE, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • 8GB of DDR4 Memory (dual banks)
Benefits
  • Xilinx UltraScale™ XCKU115 FPGA provides strong connectivity and processing power
  • Dual FMC sites with broad choice of compatible network, A/D, D/A and RF FMCs
  • Dual Banks of DDR4 memory allow larger buffer sizes while processing and queuing data to the host
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.