MRT314A

Four Video input via Optics with dual USB 2.0 over Optics MTCA.4 RTM for AMC314

  • 4 RTM for the AMC314 Module
  • Four Video Input over Optics
  • Dual USB 2.0 over Optics (as end points)

Download Datasheet Add to Info Request

add to compare

The MRT314A is a Rear Transition Module (RTM) for VadaTech’s AMC314 which provides four optical video inputs as well as dual USB2.0 optical endpoint device inputs to the front module FPGA.

The video input comes in as single strand LC optical cable which carry four wave length (Wave Division Multiplex, WDM).

VadaTech offers a wide range of MicroTCA.4 products, including full systems.  Contact your local salesperson or representative for details.

Key Features
  • 4 RTM for the AMC314 Module
  • Four Video Input over Optics
  • Dual USB 2.0 over Optics (as end points)
Benefits
  • Expertise in RTM and MTCA.4 board design
  • Full ecosystem of MicroTCA.4 AMCs, PMs, MCH, RTMs, chassis, and application-ready systems
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC314

Zynq UltraScale+ FPGA Video Streaming with USB 2.0, AMC

  • Xilinx UltraScale+ XCZU7EV FPGA
  • Double module, full-size
  • Rear Transition Module (RTM) per uTCA.4
  • 4x Video Stream from the RTM
  • Dual USB 2.0 from the RTM to FPGA
  • Quad USB 2.0 as pass thru to front panel
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC to PS Side
  • Dual 4 GB 32-bit wide DDR4 to the PL Side
  • SD Card
  • 128 MB of boot Flash
View product AMC314 Data Sheet

UTC006

3rd Gen MicroTCA Carrier Hub (MCH), Double Module, 40/10GbE/PCIe/FPGA/SRIO

  • Fabric options include PCIe Gen3, 40/10GbE, SRIO, Cross Bar Switch (CBS) or Xilinx Virtex-7 690T FPGA for complete flexibility
  • Front panel fabric expansion, e.g. quad ports forPCIe Gen 3 (x4, x8, or x16)
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Double module, full size per AMC.0 and MTCA.4
  • 1GbE base switch with dual 100/1000/10 G uplink
  • Full Layer 3 managed Ethernet switch
  • Unified 1 GHz quad-core CPU for MicroTCA Carrier Management Controller (MCMC), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC006s
View product UTC006 Data Sheet

VT813

8U uTCA.4 Chassis Platform, (3+1) 4400W

  • μTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
  • Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane (40GbE ready)
  • Redundant FRU information devices and carrier locators
  • Four 1.1 kW AC Power supply for 4.4 kW total
  • Telco aarm
  • FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front and back
View product VT813 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.