November 18, 2021

VadaTech announces the VTX985 which is a dual slot 3U VPX chassis conduction cooled for two 3U VPX modules.    Read More...

October 14, 2021

VadaTech announces the FMC254 which is an FPGA Mezzanine Card (FMC+) per VITA 57.4 specification.    Read More...

August 19, 2021

VadaTech announces the VPX760, a VITA 46 processor module for general purpose processing in demanding applications.    Read More...

July 27, 2021

VadaTech announces the VT971, which is a rugged conduction cooled unit which follows VITA 47 for environmental up to CC4/C3/V3/OS2.    Read More...

July 12, 2021

VadaTech announces the FMC255 which is a high-density ADC/DAC module with two LTC2107.   Read More...

June 3, 2021

VadaTech announces the AMC708, which is a Processor AMC (PrAMC) in a single module, mid-size AdvancedMC (AMC) form factor based on the NXP LS1046A (quad core) processor.    Read More...

April 29, 2021

VadaTech announces the AMC704. The AMC704 is a Processor AMC (PrAMC) in a single module, mid-size AdvancedMC (AMC) form factor based on the NXP P5040 (quad core) processors.   Read More...

April 16, 2021

VadaTech announces the VTX951. The VTX951 is a 1U Open VPX chassis with two 3U VPX payload slots.   Read More...

March 31, 2021

VadaTech announces the ATC125, which is a Carrier Module with an on board x16 PCIe Gen3 slot to accept any standard PCIe edge type module.   Read More...

March 1, 2021

VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the AMC539. The AMC539 is based on the Altera Arria-10™ GX1150 FPGA in F1517 package and is compliant to AMC.1, AMC.2, AMC.3 and/or AMC.4 specifications.    Read More...

February 8, 2021

VadaTech announces the AMC705, a Processor AMC (PrAMC) based on the NXP Layerscape LX2160A in a single-module, full-size AMC form factor based on the AMC.1, AMC.2 and the AMC.4 specifications.   Read More...

December 15, 2020

VadaTech announces the VT085/VT086. VT085, when used in conjunction with a VT086, forms a complete KVM extension over a secure LC Fiber link.   Read More...

November 24, 2020

VadaTech announces the VTX995. The VTX995 is a dual slot 6U VPX chassis supporting up to two conduction cooled 6U VPX modules.   Read More...

October 22, 2020

VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the VPX339. The VPX339 is based on the Data Device Corporation (DDC), BU-67118 multi-channel, multi-protocol avionics product.   Read More...

October 2, 2020

VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the FMC238 and FMC239. Both FMC’s are a FPGA Mezzanine Card (FMC) per VITA 57.1 standard.   Read More...

August 24, 2020

VadaTech announces the VPX337. The VPX337 provides a complete, feature-rich, GPS/PTP (1588)/IRIG/NTP bus-level timing solution to a VPX system, with exceptional flexibility.   Read More...

August 5, 2020

VadaTech announces the PCI597. The module front panel I/O is via six Board-mount Optical Assemblies, each providing 12 channel full-duplex transceivers with Clock Data Recovery (when using 28G transceivers) and fiber I/O via MTP/MPO.   Read More...

July 23, 2020

VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the PCI124 and PCI125. The PCI124/125 are VadaTech’s 4th generation PCIe expansion modules based on the PCI-SIG specification.   Read More...

June 29, 2020

VadaTech announces the VPX572 that provides a dual ADC with sampling rates of up to 6.4 GSPS at 12-bit resolution (ADC12DJ3200).    Read More...

June 5, 2020

VadaTech announces the VPX585. The VPX585 is a 3U VPX FPGA Carrier with single FMC+ (VITA-57.4) interface.   Read More...

May 4, 2020

VadaTech announces the AMC576 module, which utilizes the Xilinx XCZU29DR RFSoC and is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications.   Read More...

April 2, 2020

VadaTech announces the VTX661 chassis, which is an 8U VPX chassis with twelve 3U VPX slots. The chassis can accept 0.8-inch, 0.85-inch and 1.0-inch pitch modules and is ideal for commercial deployment.   Read More...

March 2, 2020

VadaTech announces the VTX880 and VTX881 chassis. The VTX880 is a 2U VPX chassis with six 3U VPX slots, while the VTX881 is a 2U VPX chassis with three 6U VPX slots.    Read More...

February 4, 2020

VadaTech announces the ATC128. The ATC128 is a high performance ATCA processor blade featuring dual 24 core Intel® Xeon® processors, each with six banks of memory providing up to a total of 384 GB DDR4 memory with ECC.   Read More...

January 13, 2020

VadaTech announces the FMC259. The FMC259 is an FPGA Mezzanine Module per VITA 57.4 (FMC+) specification with dual Board-Mount Optical Assemblies, each providing 24 channel full-duplex transceivers capable of up to 28.1 Gb/s per channel (more than 1344Gb/s total bi-directional).   Read More...

December 19, 2019

VadaTech announces the AMC573 that utilizes the Xilinx XCZU28DR RFSoC and is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications.    Read More...

December 5, 2019

VadaTech announces the AMC560. The AMC560 is an AMC FPGA Carrier with dual FMC+ (VITA 57.4) interfaces and is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications.   Read More...

November 21, 2019

VadaTech announces the VTX660. The VTX660 is an 8U VPX chassis with six 3U VPX slots.   Read More...

November 6, 2019

VadaTech announces the ATC605. The ATC605 is a Network Attached Storage Blade incorporating on-board Intel Xeon E3-1505M and a high-performance hardware off-load engine for iSCSI Target supporting line rate at 40GbE.    Read More...

September 25, 2019

VadaTech, announces the UTC042. The VadaTech UTC042 is a rugged version of the UTC004 (the front I/O Dual Ethernet ports have changed from 10G copper to the 1Gb copper, other I/O matches the UTC004), the most feature-rich MCH in the market.    Read More...

September 4, 2019

VadaTech announces the FMC257. The FMC257 is a storage module with dual NVMe storage SSD which provides high speed and low latency read/write.    Read More...

August 15, 2019

VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the VPX580 rugged DSP blade. The VPX580 is a 6U VPX board based on Xilinx UltraScale+ XCZU19EG MPSoC FPGA with dual FMC+ sites, coupling real-time processing capability with high speed I/O and making it suitable for radar, signal intelligence and image processing...   Read More...

July 31, 2019

The VTX955 is a 1U Open VPX chassis with two 3U VPX payload slots. It can accept 0.8-inch, 0.85-inch and 1.0-inch pitch modules and is ideal for commercial deployment.   Read More...

July 12, 2019

VadaTech announces the VT931. The VT931 is a rugged MicroTCA chassis that provides 12 AMC slots and can accept any AMC.1, AMC.2, AMC.3 and/or AMC.4 modules.   Read More...

June 27, 2019

VadaTech announces the VPX007. The VadaTech VPX007 is a versatile 10GbE VPX switch with optional health management.   Read More...

June 12, 2019

VadaTech announces the VTX980/981/982. These are single slot 3U VPX chassis with 750W AC power supply for board bring-up and testing of 3U VPX modules.    Read More...

May 23, 2019

VadaTech announces the FMC258. The FMC258 is an FPGA Mezzanine Module per VITA 57.4 (FMC+) specification. It has a single Board-Mount Optical Assembly, providing 12 channel full-duplex transceivers with Clock Data Recovery (CDR) and front-panel Fiber I/O via MTP/MPO.   Read More...

May 10, 2019

VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the VPX981. The VPX981 is an optical amplifier/splitter module for use in 6U OpenVPX platforms requiring signal distribution over fiber.   Read More...

April 26, 2019

VadaTech announces the AMC243. VadaTech AMC243 Host Bus Adapter (HBA) is a dual port 40/50/100Gb Ethernet Unified Wire Adapter, with a PCI Express 3.0 x16 host bus interface, optimized for storage, cloud computing, HPC, virtualization and other datacenter networking applications.   Read More...

April 9, 2019

VadaTech announces the AMC741. The AMC741 is ideal for packet filtering, intelligent networking, multimedia, video transcoding, cloud and other applications.    Read More...

March 28, 2019

VadaTech announces the VPX571, which provides dual agile RF transceivers, each based on AD9364. One channel includes a programmable filter on transmit.    Read More...

March 14, 2019

VadaTech announces the VTX350. The VTX350 is a 6U VPX chassis with up to twelve 6U VPX slots and provision for dual power modules ideal for field deployment.   Read More...

March 1, 2019

VadaTech announces the VT954. The VT954 is a rugged 1U chassis used in Mil/Aero or other applications that need to withstand shock/vibration.   Read More...

February 15, 2019

VadaTech announces the ATC500. The ATC500 is an AdvancedTCA Blade with two XCVU13P FPGAs and multiple ADRV9009 for Wideband Massive MIMO Software Defined Radio.   Read More...

February 8, 2019

VadaTech announces the VPX752. The VPX752 is a processor module (VITA 46) for general purpose processing in demanding applications.   Read More...

January 21, 2019

VadaTech announces the AMC575. The AMC575 utilizes the Xilinx XCZU29DR RFSoC and is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications.    Read More...

January 3, 2019

VadaTech announces the VPX980. The VadaTech VPX980 Chassis Manager is based on the VITA 46.11 specification. The VITA 46.11 leverages the Intelligent Platform Management Interface (IPMI) and AdvancedTCA Specification by the PICMG as its architectural foundation.   Read More...

December 11, 2018

VadaTech announces the AMC598 and VPX598. Both of these boards provide quad ADC with sample rates of up to 3 GSPS (AD9208) at 14-bits and a quad DAC (Analog Devices AD9162 or AD9164) with update rates of up to 12 GSPS and direct RF synthesis at 6 GSPS,16-bits making it suitable for signal capture/analysis applications such as COMINT/SIGINT, radar, research and instrumentation.   Read More...

November 29, 2018

VadaTech announces the AMC645. The AMC645 is a full Dual Core ARM A15 RAID On Chip (ROC) Host Bus Adapter (HBA) which supports RAID level 0, 1, 5, 6, 10, 50 and 60.    Read More...

November 8, 2018

VadaTech announces the VPX551 high-speed FPGA compute module for signal processing and beamforming applications.   Read More...

October 24, 2018

VadaTech announces the VPX570. The VPX570 is a low-latency RF ADC/DAC module with ADC supporting rates up to 5.4 GSPS and a DAC supporting rates up to 6 GSPS, both at 12 bits.    Read More...

October 9, 2018

VadaTech announces the VPX597. The VPX597 is a wideband transceiver in 3U VPX form factor.   Read More...

September 17, 2018

VadaTech announces the VTX991. The VTX991 is a single slot 6U VPX chassis for board bring-up and testing of 6U VPX modules.    Read More...

September 4, 2018

VadaTech announces the AMC541. The AMC541 couples Xilinx Zynq Ultrascale+ XCZU19EG MPSoC FPGA with the TCI6638K2K communications KeyStone SoC to provide a high performance wireless infrastructure module.   Read More...

August 16, 2018

VadaTech announces the AMC585. The AMC585 is an AMC FPGA Carrier with single FMC+ (VITA-57.4) interfaces.    Read More...

July 27, 2018

VadaTech announces two new products based on the Xilinx Zynq® UltraScale+™ MPSoC (MultiProcessor System on Chip).   Read More...

July 11, 2018

VadaTech announces the AMC587 and AMC588. These modules couple high-performance RF front end with an XCVU13P providing signal processing bandwidth at over 20 TeraMACs of DSP compute performance in the compact AdvancedMC (AMC) form factor.   Read More...

June 19, 2018

VadaTech announces the AMC756, AMC757, AMC758 and AMC759. These are Processor AMCs (PrAMC) in AdvancedMC (AMC) form factor based on the 14nm Intel® Xeon® Processor E3-1505M v6 with CM238 PCH.    Read More...

May 31, 2018

VadaTech announces the AMC640 and AMC641. The AMC640 is an M.2 Host Bus Adapter (HBA) which supports up to four M.2 type 2280 and /or 22110 style storage devices.    Read More...

May 17, 2018

VadaTech announces the VTX870, a VPX chassis with six 3U VPX slots (switch plus 5 payload slots) that can accept 0.8-inch, 0.85-inch and 1.0-inch pitch modules.    Read More...

May 3, 2018

VadaTech announces the AMC588. The AMC588 is a wideband transceiver in AMC form factor that utilizes four AD9371 connected to a Virtex UltraScale+™ FPGA providing eight transceivers channels.    Read More...

April 24, 2018

VadaTech announces the VPX004. The VPX004 is the most feature-rich OpenVPX Switch with integrated health management in the market.   Read More...

March 28, 2018

VadaTech announces FMC231. The FMC231 is an FPGA Mezzanine Card (FMC) per VITA 57.1 specification that offers dynamic performance via quad ADC (the ADC chips are dual channel) and quad DAC (the DAC chip is quad channel).    Read More...

March 19, 2018

VadaTech announces the VT817 and VT819 chassis. The VT817 is a convenient low-cost MicroTCA.4 PCIe Gen3 Expansion solution, providing a flexible and effective method of incorporating MTCA.4 acquisition and control hardware into a PC processing environment.    Read More...

March 1, 2018

VadaTech announces the VT882. The VT882 is a 2U MTCA chassis that provides eight extended-size/full-size and/or mid-size AMC slots that can accept any AMC.1, AMC.2, AMC.3 and/or AMC.4 modules.   Read More...

January 30, 2018

VadaTech announces the AMC584. The AMC584 is a double-module in an AMC form factor card with Xilinx Virtex UltraScale+™XCVU13P FPGA and two banks of 64-bit wide DDR4.   Read More...

January 12, 2018

VadaTech announces the FMC155. The FMC155 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard, offering a small footprint and allowing for general-purpose I/O expansion.   Read More...

December 19, 2017

VadaTech announces the AMC241. The AMC241 is a 36x36 Cross Bar Switch (CBS) in the AMC form factor which allows any of the 20 lanes from the backplane to be routed to the front.    Read More...

November 21, 2017

VadaTech has added four new products to the range of GSPS ADC and DAC modules with integrated FPGA, available in OpenVPX and AMC form factor.   Read More...

November 1, 2017

VadaTech now offers a 40GbE rugged 6-slot MicroTCA chassis in a 1U height. The chassis is designed to meet MIL-STD-901D and 810G for shock and vibration and MIL-STD-461F for EMI.    Read More...

October 18, 2017

VadaTech announces the AMC580. The AMC580 is an AMC FPGA Carrier with Xilinx Zynq UltraScale+ (XCZU19EG) FPGA and dual FMC (VITA-57) sites.   Read More...

October 6, 2017

VadaTech announces a full line of Video encoder/decoder AMCs, comprising the AMC347, AMC350, AMC351 and AMC352.   Read More...

September 11, 2017

VadaTech announces the FMC216 FPGA Mezzanine Card (FMC) per VITA 57. The FMC216 provides 12-bit ADC conversion at rate of up to 2.6 GSPS (ordering options available for 2.0 and 2.5 GSPS) and 14-bit DAC conversion at rates of up to 5.6 GSPS.    Read More...

August 24, 2017

VadaTech announces the AMC540. The AMC540 is a double-module AMC (Advanced Mezzanine Card) with Xilinx Virtex-7 XC7VX690T FPGA and dual multicore TI TMS320C667x Digital Signal Processors (DSP).    Read More...

August 9, 2017

The VT988 is a TI ADC08B3000 based 16-channel data acquisition platform capable of synchronous sampling 8-bit ADCs at up to 3 GSPS.    Read More...

July 13, 2017

VadaTech announces the AMC583 dual FMC+ carrier and FMC250 ADC/DAC FMC+ module.    Read More...

June 28, 2017

VadaTech embedded boards, enabling software and application-ready platforms, announces the AMC597 300MHz to 6GHz Octal Versatile Wideband Transceiver.    Read More...

June 15, 2017

VadaTech announces the UTC040C Conduction Cooled MicroTCA Carrier Hub (MCH). The UTC040C includes PCIe Gen3 switch with 1024Gbps aggregate bandwidth, automatic speed negotiation, and virtual switch (multiple domain, non-transparent port support) to enable partitioning of the system with multiple root complexes.   Read More...

June 2, 2017

VadaTech announces two new ATCA 40GbE Switches (ATC804 and ATC803) based on the Broadcom Trident 2+ switch with an aggregate switching throughput of 1.2 TBit.   Read More...

May 10, 2017

VadaTech announces the AMC350 Quad HDMI/DVI H.264 Encoder. This AdvancedMC (AMC) single-module design encodes full HD to H.264, MPEG-4 and H.263 with throughput up to 1920 x 1088 at 60 frames per second in a compact multi-channel unit.   Read More...

April 20, 2017

VadaTech announces the AMC005 Time and Frequency module with on-board GPS. The AMC005 provides a complete, feature-rich, GPS / PTP (1588) / IRIG / NTP bus-level timing solution to MicroTCA and ATCA systems.   Read More...

April 5, 2017

VadaTech announces expansion of the DAQ Series™ product range in MTCA.4. The DAQ523 provides 12 channels of ADC (AD9653) with 2 channels of DAC (MAX5878) coupled to Xilinx Kintex-7 XC7K410T FPGA and now has options for programmable gain and AC/DC selection, and for optical detection in the 1310 to 1650 nm range.   Read More...

March 22, 2017

VadaTech announces the VPX599 and AMC599 ADC/DAC modules. Both units comprise dual 12-bit ADC at 6.4 GSPS and dual 16-bit DAC at 12 GSPS, with Xilinx UltraScale™ XCKU115 FPGA and 3 banks of DDR4 totaling 20GB.   Read More...

March 8, 2017

VadaTech announces the AMC535 and AMC536 AdvancedMC FMC carriers based on Altera Arria-10™ FPGAs.    Read More...

February 22, 2017

VadaTech announces the AMC902, a dual-channel IF signal conditioning unit providing programmable gain/attenuation.   Read More...

February 9, 2017

VadaTech announces the VT884, a 3U 12-slot MicroTCA chassis. The VT884 is targeted at ASIC emulation, network processing, medical imaging and other processing-rich and high-bandwidth applications.   Read More...

December 16, 2016

VadaTech announces the AMC596, an FPGA module based on the Virtex UltraScale™ XCVU440 FPGA.    Read More...

November 29, 2016

VadaTech, together with integration partner Emcomo Solutions AG, will present innovations in MicroTCA at the 5th MicroTCA Workshop for industry and research taking place at DESY in Hamburg, Germany on 7th and 8th December.    Read More...

July 15, 2016

VadaTech launched three new FMC carriers in the PCI Express form factor. The PCI516, PCI592 and PCI595 cards are ideal for bringing COTS PCIe systems up to date with the latest FPGAs, or for integrating high-end FMCs.   Read More...

June 13, 2016

VadaTech has partnered with ECRIN Systems to showcase the latest VadaTech solutions for defence, aerospace and security at Eurosatory being held in Paris between the 13th and 17th June.   Read More...

January 18, 2016

VadaTech announced the AMC595, an Advanced Mezzanine Card or AdvancedMC (AMC) based on the Xilinx® Virtex® UltraScale™ XCVU440 FPGA, arguably the highest performance FPGA available today.   Read More...

January 18, 2016

VadaTech announced a major new initiative to bring its existing commercially-developed designs to the 3U VPX form factor.   Read More...

January 18, 2016

VadaTech announced the PCI516, a PCI Express add-on card to carry FPGA Mezzanine Cards (FMCs) in rugged and commercial servers.   Read More...

January 18, 2016

VadaTech announced its DAQ_Series Software to simplify and accelerate the development of data acquisition systems.   Read More...

December 10, 2015

VadaTech today announced an exclusive agreement to integrate Seven Solutions’ White Rabbit technology into its MicroTCA (µTCA) products.   Read More...

November 17, 2015

VadaTech announced that its latest processor AdvancedMC (PrAMC), the AMC754, is available with either the new 8-core Intel® Xeon® processor D-1548 or 4-core Intel® Xeon® processor D-1520 and provides a migration path to next-generation 16-core processors expected to be available end of Q1 2016.   Read More...

June 9, 2015

VadaTech has new Virtex-7 690T FPGA carriers in the AMC format.    Read More...

June 2, 2015

VadaTech has announced a FPGA Mezzanine Card (FMC) per VITA 57 for high-speed networking.    Read More...

May 28, 2015

VadaTech has announced a new eight channel analog to digital converter (ADC) with 10-bit @ 2.6 GSPS performance. The board also has a single DAC, 14-bit @ 2.8 GSPS.    Read More...

May 27, 2015

VadaTech has announced a new Advanced Mezzanine Card (AMC) with four SATA III drives for nearly 2 TB of storage in one module.   Read More...

May 12, 2015

VadaTech has announced a new brochure on Defense & Aerospace Computing. The brochure includes products and application-ready solutions utilizing modular open standard architectures.   Read More...

April 24, 2015

VadaTech now offers a single module AMC that has a dual DAC and high-performance FPGA.    Read More...

March 25, 2015

VadaTech has released a new ADC (analog-to-digital converter) for RADAR, SIG-INT, wireless infrastructure, RF Sampling SDR, and other applications.    Read More...

March 19, 2015

VadaTech has released a new 6U MicroTCA embedded computing system platform with quiet fan trays designed to operate at under 55dBA, suitable for office use.    Read More...

March 12, 2015

VadaTech now offers a dual FPGA Mezzanine Card (FMC) carrier per the VITA 57 specification. The AMC module features a Xilinx® Kintex-7 FPGA.    Read More...

February 24, 2015

VadaTech has announced two boards that provide high-speed PCIe Expansion from an industrial PC to MicroTCA, AdvancedTCA, or other systems. The versatile modules can be used with industry standard options for copper or fiber cables. Customization is not required.    Read More...

February 23, 2015

VadaTech now offers a dual Digital-to-Analog Converter (DAC) and a twelve channel ADC compliant to the MicroTCA.4 specification for High Energy Physics.   Read More...

February 23, 2015

VadaTech has announced two new high-performance AMC boards that utilize Xilinx All Programmable FPGAs.    Read More...

January 20, 2015

VadaTech now offers a PCIe Gen3 carrier board that allows high-performance commercial video or other boards to be utilized in a MicroTCA system.    Read More...

January 13, 2015

VadaTech has announced a new FPGA Mezzanine Card (FMC) that is both an A/D and D/A converter.    Read More...

December 15, 2014

VadaTech now offers a rugged 6-slot MicroTCA chassis in a 1U height.   Read More...

December 9, 2014

VadaTech offers a wide range of adapter cards that allow standard mezzanine cards of multiple formats to be utilized within the system.    Read More...

December 1, 2014

VadaTech now offers a new AdvancedTCA carrier for one PCIe Gen 3 card along with on-board Intel Xeon processor and shelf manager.    Read More...

November 17, 2014

VadaTech has announced a dual wideband transceiver in the FPGA Mezzanine Card (FMC) format. The board has a frequency range of 70 MHz to 6 GHz and is ideal for LTE, SDR, and other advanced RF applications.    Read More...

November 10, 2014

VadaTech now offers a 2U chassis platform that complies to the MicroTCA.4 specification for High Energy Physics and other applications requiring rear IO.    Read More...

November 3, 2014

VadaTech has announced a FPGA in the Advanced Mezzanine Card (AMC) form factor that utilizes the Xilinx® Zynq® all programmable SoC.    Read More...

October 20, 2014

VadaTech offers a single slot backplane for test & development of Advanced Mezzanine Card (AMC) modules.   Read More...

September 25, 2014

VadaTech has announced a 2U Hybrid Chassis that provides MicroTCA.4 compliant slots along with MicroTCA.0 standard slots.    Read More...

September 15, 2014

VadaTech has announced a new Tilera GX-72 Processor in the Advanced Mezzanine Card (AMC) form factor. The processor features 72 tiles (cores) in the double module, full-size.    Read More...

August 27, 2014

VadaTech now offers chassis and modules that are compliant to the MicroTCA.1 specification for air-cooled rugged applications.    Read More...

July 29, 2014

VadaTech is having its 10th anniversary on July 31, 2014.    Read More...

July 28, 2014

VadaTech now offers a 1U MicroTCA chassis platform with several unique design features that allow more slots in a front-to-rear cooled solution while maintaining full redundancy.   Read More...

July 15, 2014

VadaTech now offers Express Development Platforms. The system platforms are standard, high versatile configurations designed to meet a wide range of development needs.   Read More...

July 10, 2014

VadaTech now offers FMCs with high-speed interfaces up to 40GB speeds. This includes cages for dual QSPF+, SPF+, and RJ-45 as well as some quad cage versions.   Read More...

June 25, 2014

VadaTech now offers an Advanced Mezzanine Card (AMC) processor with a CFP2 front panel port for 100G capabilities.    Read More...

June 16, 2014

VadaTech now offers a new AdvancedTCA carrier board that holds four Advanced Mezzanine Cards (AMCs) along with several other features.    Read More...

June 4, 2014

VadaTech has upgraded its line of AMC Storage Modules with higher transfer rate, RAID and Host Bus Adapter options.    Read More...

May 27, 2014

VadaTech now offers a new generation of its mezzanine-based shelf manager that is used in AdvancedTCA (ATCA), MicroTCA...    Read More...

May 20, 2014

VadaTech now offers a Digital-to-Analog Converter (DAC) in the FPGA Mezzanine Card (FMC) format. The high-speed DAC offers 14-bit at 2.5 Giga samples per second.    Read More...

May 13, 2014

VadaTech now offers a new data processor that meets the MicroTCA.4 specification with a rear I/O interface.   Read More...

April 29, 2014

Partnership increases breadth and depth of solutions available for complex, high bandwidth telecommunications and networking applications   Read More...

April 28, 2014

VadaTech now offers a MicroTCA Carrier Hub (MCH) with a 40GbE option, synchronous Ethernet, and advanced clocking/GPS capability.   Read More...

April 17, 2014

VadaTech now offers an 8U high chassis compliant with the MicroTCA.4 specification that offers N+1 redundant power to 4400W.    Read More...

April 4, 2014

VadaTech has developed a MicroTCA Overview Guide that provides a detailed explanation of the technology, along with product examples...   Read More...

April 1, 2014

VadaTech has a new Web site designed for usability and content-rich features...   Read More...

March 26, 2014

VadaTech has released a full suite of FPGA Mezzanine Carriers based on Xilinx® All Programmable FPGAs...   Read More...

February 27, 2014

VadaTech is opening a 72,000 square foot facility on March 21st, 2014. Serving the Telecommunications, Defense, Aerospace, Medical, and Industrial markets, VadaTech is expanding its operations worldwide...    Read More...

February 24, 2014

VadaTech has announced the industry's first 40G MicroTCA chassis platform. The 5U chassis holds up to 12 full-sized Advanced Mezzanine Card (AMC) modules in the single width format.   Read More...

February 24, 2014

VadaTech has entered into a licensing agreement with DESY to manufacture MicroTCA.4 product. DESY is a research center of the Helmholtz Association, providing research and product solutions for the Photon Science, Accelerator and High Energy Physics communities.   Read More...

February 6, 2014

VadaTech has announced new 40G/10G Layer 3 managed switches for AdvancedTCA (ATCA). The board includes two mid-sized AMC slots, providing a powerful combination of throughput and versatility.   Read More...

November 15, 2013

Henderson, NV – Nov 18, 2013 – Vadatech, a manufacturer of embedded boards and chassis platforms, has announced its first application-ready platform (ARP).The ARP is a pre-configured system platform that is suited for Mil/Aero applications requiring front-end deterministic processing and high data rates...   Read More...

November 1, 2013

Henderson, NV –Nov 01, 2013 – VadaTech, a manufacturer of embedded boards and complete application-ready platforms, is offering a 6-channel GPGPU board in the Advanced Mezzanine Card (AMC) format. The board uses the AMDE6760 graphics processor chip for fast performance along with 1G of GDDR5 memory. The board is ideal for mil/aero, medical, video processing, energy exploration, border...   Read More...

October 28, 2013

Henderson, NV – Oct 18, 2013 – VadaTech, a manufacturer of embedded boards and complete application-ready platforms, has announced a new 6U ATCA shelf with integrated boards that combine the functionality of switch cards and shelf managers...   Read More...

September 17, 2013

Henderson, NV –Sept17, 2013 – VadaTech, a manufacturer of embedded boards and complete application-ready platforms, now offers a new power module compliant to the MicroTCA.0 specification that boasts up to 950W of DC power. This is over 150W more power than any same-sized (single width) module in the industry, including VadaTech’s first generation UTC010 unit...   Read More...

August 20, 2013

Henderson, NV – Aug 20, 2013 – VadaTech, a manufacturer of embedded boards and complete application-ready platforms, now offers an 8U MicroTCA.4 chassis designed for High-Energy Physics and other applications that require rear I/O. The chassis features full, including dual fan trays, dual MicroTCA Carrier Hub (MCH) slots, and quad Power Module (PM) slots...   Read More...

August 6, 2013

Henderson, NV – Aug 6, 2013 – VadaTech, a manufacturer of embedded boards and complete application-ready platforms, has released a complete ecosystem of boards and chassis in the MicroTCA architecture that is conduction-cooled. Designed for rugged applications, the products include Air Transport Racks (ATR), MicroTCA Carrier Hubs (MCH), Power Modules, and Advanced Mezzanine Cards...   Read More...