Storage

VadaTech has a wide range of storage modules for MicroTCA systems and other systems than can accommodate the AdvancedMC (AMC) form factor with options up to SAS-3 and SATA III, RAID controllers and JBOD AMCs with up to 8 mSATA SSDs on a single module.

ATCA Storage

ATC600

ATCA Storage Blade with RAID and iSCSI

  • Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network File System (NFS) or Common Internet File System (CIFS)
  • Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
  • Fully compliant with the IETF RFC3270 and RFC4171
  • RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
  • Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
  • RAID spans 10, 50 and 60
  • Battery pack option to prevent data loss
  • Utilizes VadaTech’s proven IPMI Management Controller
View product ATC600 Data Sheet

ATC605

ATCA Storage Blade with RAID and iSCSI

  • Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network FileSystem (NFS) or Common Internet File System (CIFS)
  • Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
  • Fully compliant with the IETF RFC3270 and RFC4171
  • RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
  • Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
  • RAID spans 10, 50 and 60
  • Battery pack option to prevent data loss
  • Utilizes VadaTech’s proven IPMI Management Controller
View product ATC605 Data Sheet

ATCA Storage

( expand all )

ATC600

ATCA Storage Blade with RAID and iSCSI

ATC605

ATCA Storage Blade with RAID and iSCSI

ATCA RTM Storage

( close )

ART116

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
  • DVI-I interface (VGA and DVI-D)
  • Resolution @ 1920x1200
  • Dual on board 2.5” SAS/SATA Disk
  • Disks run as independent or as RAID 0 or 1
  • Two port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45
  • Front Management RS-232 to RJ-45
  • IPMI 2.0 Man
View product ART116 Data Sheet

ART115

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260,CP3220, VadaTech ATC114, etc.
  • Dual DVI/VGA interface
  • Resolution @ 1920x1200
  • Dual 10GbE SFP+
  • Removable on board 2.5” SAS/SATA Disk
  • Two port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45 or LC Fiber(option for SX or LX)
  • Front Blade Management RS-232 to RJ-45
  • Dual RS-232 for the host blade
  • IPMI 2.0 Management Controller
  • RoHS compliant
View product ART115 Data Sheet

ART114

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260,CP3220, ATC114, etc.
  • Two on board 2.5” SAS/SATA Disks
  • Disks run as independent or RAID 0 or 1
  • QSFP connector for PCIe Expansion
    • The PCIe is Gen2
  • Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
  • Front Blade RS-232 to Micro DB-9
  • IPMI 2.0 Management Controller
View product ART114 Data Sheet

ART113

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
  • VGA resolution @ 1920x1200 with 128MB
  • On board 2.5” SAS/SATA Disk
  • Three port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
  • Front Blade RS-232 to DB-9
  • Dual RS-232 for the host blade
  • IPMI 2.0 Management Controller
View product ART113 Data Sheet

ART112

ATCA Rear I/O Transition Module

  • ATCA rear I/O Module for Blades
    • i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
  • VGA resolution @ 1920x1200 with 128MB
  • SAS Expander via I-PASS connector
    • for JBOD
  • On board 2.5” SAS/SATA Disk
  • Three port USB 2.0 high speed (480Mbit/s)
  • Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
  • Front Blade RS-232 to DB-9
  • IPMI 2.0 Management Controller
View product ART112 Data Sheet

ART129A

Rear Transition module for ATC129

  • AdvancedTCA RTM for VadaTech ATC129 Blade
  • Dual removable 2.5” SATA Disk
  • Dual USB2.0
  • PMI 2.0 compliant
View product ART129A Data Sheet

ATCA RTM Storage

( expand all )

ART116

ATCA Rear I/O Transition Module

ART115

ATCA Rear I/O Transition Module

ART114

ATCA Rear I/O Transition Module

ART113

ATCA Rear I/O Transition Module

ART112

ATCA Rear I/O Transition Module

ART129A

Rear Transition module for ATC129

AMC - RAID

( close )
Storage modules without a disk, including RAID and Advanced RAID.

AMC630

1.8” Quad SATA Drive, 6 Gbps RAID HBA

  • 1.8” SATA 6.0 Gbps drive HBA (Host BusAdapter)
  • AMC.1 x2 PCIe Gen 2
  • Four SATA disks on a single AMC
  • Independent disk or hardware RAID 0, 1,and 10
  • Double-module, compact-size (mid and full size options available)
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC630 Data Sheet

AMC633

AMC RAID HBA, with 8 mSATA Disks

  • Single module, mid-size per AMC.0
  • AMC RAID Host Bus Adapter HBA
  • Module comes with 8 mSATA Disks
  • Single removable tray carries mSATA drives
  • AMC.1 with PCIe Gen3 x8 or x4
  • Integrated RAID 0, 1, 1E and 10
  • Auto-latching of the caddy into the carrier for secure retention, push-button release
View product AMC633 Data Sheet

AMC631C

Integrated RAID HBA with SAS Expander, AMC

  • Host Bus Adapter (HBA) for off board SATA and SAS-3 (12 Gbps) drives
  • Single module, mid-size per AMC.0
  • Integrated RAID 0, 1, 1E, and 10
  • PCIe Gen3 x8 or x4 on ports 4-11, AMC.1 compliant
  • SAS-3/SATA III x4 lanes on ports 12-15 and ports 17-20
  • Additional x24 lanes on tongue 2
View product AMC631C Data Sheet

AMC640

NVMe HBA, with Quad M.2 NVMe Solid State Drives, AMC

  • AMC M.2 NVMe Host Bus Adapter with quad M.2 NVMe type SSD
  • Allows for M.2 Type 2280 and/or 22110
  • AMC.1 PCIe Gen3 x8 or dual x4 to the backplane
  • PCIe x4 Gen3 to each M.2 Socket
  • Single module, mid-size per AMC.0
  • IPMI 2.0 compliant
View product AMC640 Data Sheet

AMC641

NVMe HBA, with Dual M.2 NVMe Solid State Drives, AMC

  • AMC M.2 NVMe Host Bus Adapter with dual M.2 NVMe type SSD
  • Allows for M.2 Type 2280 and/or 22110
  • AMC.1 PCIe Gen3 dual x4 to the backplane
  • PCIe x4 Gen3 to each M.2 Socket
  • Single module, mid-size per AMC.0
  • IPMI 2.0 compliant
View product AMC641 Data Sheet

AMC645

NVMe HBA with 16 NVMe Solid State Drives, AMC

  • AMC NVMe Host Bus Adapter (HBA) with Full support for RAID
  • Dual Core ARM A15 RAID on Chip (ROC)
  • Onboard 8 GB of DDR4 Memory with ECC
  • Hardware Engine for RAID 5 and RAID 6 acceleration
  • AMC.1 PCIe Gen3 x8
  • Single module, mid-size per AMC.0
  • IPMI 2.0 compliant
View product AMC645 Data Sheet

AMC629

AMC Integrated RAID w/HBA

  • Host Bus Adapter (HBA) for external SATA III (6.0 Gbps) or SAS-3 (12 Gbps) drives
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • Integrated RAID 0, 1, 1E, and 10
  • PCIe Gen3 x8 or x4 on ports 4-11, AMC.1 compliant
  • SAS-3/SATA III x4 lanes on ports 12-15 and ports 17-20
  • IPMI 2.0 compliant
View product AMC629 Data Sheet

AMC628

Advanced RAID (0, 1, 5, 6, 10, 50 and 60)

  • RAID levels 0, 1, 5 and 6
  • RAID spans 10, 50 and 60
  • Dual Core ROC (RAID On Chip) at 800MHz per Core
  • PCIe Gen3 x4 or x8 lanes
  • Single module, mid size (full size option available)
  • Two mini-SAS-SFF-8644 x4 connectors (ASHD Interconnect System)
  • 6Gb/s throughput per port
  • 1GB DDRIII cache (1333 MHz)
  • Battery backed cache protection (option)
  • Connect up to 240 SATA and/or SAS devices
  • Up to 64 logical drive support
  • Capacity Expansion
  • RAID level migration
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC628 Data Sheet

AMC626

Integrated RAID, Expansion w/HBA

  • Host Bus Adapter (HBA) for external SATA III (6.0 Gbps) or SAS-3 (12 Gbps) drives
  • AMC.1 compliant, PCIe Gen3 x8 or x4
  • Support for 8 SAS/SATA ports
  • Dual expansion ports to external devices
  • Integrated RAID 0, 1, 1E, and 10
  • Single module, mid-size (full-size options available)
View product AMC626 Data Sheet

AMC - RAID

( expand all )
Storage modules without a disk, including RAID and Advanced RAID.

AMC630

1.8” Quad SATA Drive, 6 Gbps RAID HBA

AMC633

AMC RAID HBA, with 8 mSATA Disks

AMC631C

Integrated RAID HBA with SAS Expander, AMC

AMC640

NVMe HBA, with Quad M.2 NVMe Solid State Drives, AMC

AMC641

NVMe HBA, with Dual M.2 NVMe Solid State Drives, AMC

AMC645

NVMe HBA with 16 NVMe Solid State Drives, AMC

AMC629

AMC Integrated RAID w/HBA

AMC628

Advanced RAID (0, 1, 5, 6, 10, 50 and 60)

AMC626

Integrated RAID, Expansion w/HBA

AMC – HBA

AMC243

Dual High performance 40/50/100GbE Host Bus Adapter

  • Dual 40/50/100GbE via QSFP28+
  • PCIe Gen3 x16
  • 32K concurrent offload connectivity capacity
  • Full TCP and UDP offload
  • Full iSCIS and FCOE offload
  • Full NVMe over Fabrics (NVMe-oF) offload
  • On board 4GB of DDR-4 with ECC
View product AMC243 Data Sheet

AMC619

SATA HBA with USB 2.0 to SDHC Socket, AMC

  • AMC.2 SATA Host Bus Adapter
  • USB 2.0 to SDHC Socket
  • Allows for any 2.5” SATA Disk
  • Port 2 to SATA interface
  • Port 20 (RX) for the USB 2.0 to SDHC socket
  • Single module, mid-size per AMC.0 for SSD and full-size for Enterprise Hard drive or large SSD Size
  • IPMI 2.0 compliant
View product AMC619 Data Sheet

AMC – HBA

( expand all )

AMC243

Dual High performance 40/50/100GbE Host Bus Adapter

AMC619

SATA HBA with USB 2.0 to SDHC Socket, AMC

AMC - Dual/Quad/JBOD

( close )
Storage modules with dual or quad disks. Versions with one or more removable disks are available.

AMC635

AMC Carrier for JBOD, 8 mSATA Disks

  • JBOD Carrier Module for 8 Mini-SATA (mSATA) disks
  • Single removable tray carries mSATA drives
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • Auto-latching of the caddy into the carrier for secure retention, pushbutton release
  • IPMI 2.0 compliant
View product AMC635 Data Sheet

AMC632C

AMC Carrier for JBOD, 8 mSATA Disks

  • JBOD Carrier Module for 8 Mini-SATA (mSATA) disks
  • Single module, mid-size per AMC.0
  • Single removable tray carries mSATA drives
  • Multi-Terabit storage capacity in a single module AMC form factor carrier
  • Auto-latching of the caddy into the carrier for secure retention, push button release
View product AMC632C Data Sheet

AMC624

2.5” Dual/Single SATA III Drive, 6 Gbps

  • 2.5” SATA III 6.0 Gbps drive (can support legacy 1.5 and 3 Gbps)
  • Single module, mid-size for single disk or full-size for dual disk
  • AMC.3 compliant
  • Option for Solid State Drive or Rotary Disk
View product AMC624 Data Sheet

AMC623

1.8” Quad SATA Drive, 6 Gbps RAID HBA

  • 1.8” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
  • AMC.1 x2 PCIe Gen 2
  • Supports four SATA disks on a single AMC module
  • Independent disk or hardware RAID 0, 1 and 10\
  • Single module, mid-size with full-size option
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC623 Data Sheet

AMC622

1.8” Dual SATA Drive, 6 Gbps RAID HBA

  • 1.8” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
  • AMC.1 x2 PCIe Gen 2
  • Two SATA disks on a single AMC
  • Independent disk or hardware RAID 0, 1, and 10
  • Single-module, compact-size (mid and full-size options available)
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC622 Data Sheet

AMC621

2.5” Dual SATA Drive, 6 Gbps RAID HBA

  • 2.5” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
  • AMC.1 x2 PCIe Gen 2
  • Supports two SATA disks on a single AMC module
  • Independent disk or hardware RAID 0, 1 and 10
  • Single module, full-size
  • IPMI 2.0 compliant
View product AMC621 Data Sheet

AMC609

LEGACY

AMC 1.8 Inch Removable Dual Drive Module

  • Two 1.8 inch HDDs, up to 320 Gbytes total
  • Available with optional Solid State Flash drives
  • AMC.1 or AMC.3 options
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC609 Data Sheet

AMC603

LEGACY

AMC 2.5 Inch Dual Drives Module

  • Two 2.5 inch SATA HDDs providing up to
  • 400 Gbytes combined
  • Optional Solid State Disk (SSD)
  • AMC.1 or AMC.3 options
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC603 Data Sheet

AMC602

LEGACY

AMC CompactFlash w/ 2.5 Inch SATA Drive Module

  • Single module, compact size (mid size and full size options available)
  • 2.5 inch SATA HDD
  • Front Panel accessible CompactFlash up to
  • 8Gbytes (see ordering options)
  • Available with an optional 2.5” Solid State Flash drive (SSD)
  • AMC.1 or AMC.3 options
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC602 Data Sheet

AMC601

LEGACY

1.8 Inch Dual Drive Module

  • Two 1.8 inch SATA HDDs, up to
  • 240 Gbytes total
  • Available with optional Solid State Flash drives
  • AMC.1 or AMC.3 options
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC601 Data Sheet

AMC - Dual/Quad/JBOD

( expand all )
Storage modules with dual or quad disks. Versions with one or more removable disks are available.

AMC635

AMC Carrier for JBOD, 8 mSATA Disks

AMC632C

AMC Carrier for JBOD, 8 mSATA Disks

AMC624

2.5” Dual/Single SATA III Drive, 6 Gbps

AMC623

1.8” Quad SATA Drive, 6 Gbps RAID HBA

AMC622

1.8” Dual SATA Drive, 6 Gbps RAID HBA

AMC621

2.5” Dual SATA Drive, 6 Gbps RAID HBA

AMC609

AMC 1.8 Inch Removable Dual Drive Module

AMC603

AMC 2.5 Inch Dual Drives Module

AMC602

AMC CompactFlash w/ 2.5 Inch SATA Drive Module

AMC601

1.8 Inch Dual Drive Module

AMC - Single Disk

( close )
Storage modules with a single disk. Versions with a removable disk are also available.

AMC639

2.5” SAS/SATA Drive, DVI-I

  • 2.5” SAS/SATA HDD
  • AMC.1 and AMC.3 compliant
  • x1 PCIe Gen 1
  • Single module, mid-size (full-size options available)
  • DVI-I for graphics interface
  • 16 MB DDR Memory
  • Support for 1920x1440 resolution
  • IPMI 2.0 compliant
View product AMC639 Data Sheet

AMC611

U.2 NVMe or SATA 2.5” Solid State Drive, AMC

  • AMC Solid State Drive (SSD) with U.2 form factor
  • PCIe x4 or SATA interface
  • Storage over 15TB in single 2.5” 15mm height
  • AMC.1 PCIe
  • AMC.3 SATA
  • Single module, compact, mid-size or full-size per AMC.0
  • IPMI 2.0 compliant
View product AMC611 Data Sheet

AMC612

NEW

Network Attached Storage (NAS) AMC with NVMe Storage

  • Network Attached Storage (NAS) AMC Module
  • Storage NVMe with U.2 or SATA SSD
  • Dual 10GbE (ports 4 and 8 as 10GBASE-KR or 4-7 or 8-11 as XAUI)
  • Dual GbE (ports 0 and 1)
  • GbE to the front
  • AMC.2 specification
  • On board 8GB of DDR-4 memory with ECC
  • Single module mid-size or full-size per AMC.0
  • IPMI 2.0 compliant
View product AMC612 Data Sheet

AMC613

Network Attached Storage (NAS) AMC with Quad M.2 NVMe Storage

  • Network Attached Storage (NAS) AMC Module
  • Quad Core ARM at 1.8GHz per core with 8GB of DDR-4 Memory
  • Quad NVMe M.2 Storage devices
    • Configurable as RAID 0 or RAID 1
  • Dual 10GbE (ports 4 and 8 or 4-7 or 8-11 as XAUI)
  • Dual GbE (ports 0 and 1)
  • GbE to the front
  • AMC.2 specification
  • Single module mid-size or full-size per AMC.0
  • IPMI 2.0 compliant
View product AMC613 Data Sheet

AMC638

2.5” SATA Drive, 6 Gbps RAID HBA, DVI-I

  • 2.5” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
  • AMC.1 x1 PCIe Gen 2
  • Supports SATA ports at 6.0 Gbps
  • DVI-I for graphics interface
  • Independent disk or RAID 0, 1 and 10
  • Single module, compact-size (mid-size, full-size options available)
  • IPMI 2.0 compliant
View product AMC638 Data Sheet

AMC627

2.5” SATA III/SAS-3 Drive, 12 Gbps RAID HBA

  • Host Bus Adapter (HBA) for 2.5 inch disk with SATA III(6.0 Gbps) or SAS-3 (12 Gbps)
  • AMC.1 compliant
  • PCIe Gen3 x4 lanes
  • Independent disk or hardware RAID 0, 1, 1E and 10
  • AMC mid-size (full-size options available).
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC627 Data Sheet

AMC625

2.5” SAS–3 Drive, 12 Gbps

  • 2.5” SAS–3 Drive 12 Gbps (can support legacy 3 Gbps and 6 Gbps)
  • AMC.3 compliance
  • Single module, mid-size (full-size options available)
  • Option for Solid State Drive or Rotary Disk
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC625 Data Sheet

AMC624

2.5” Dual/Single SATA III Drive, 6 Gbps

  • 2.5” SATA III 6.0 Gbps drive (can support legacy 1.5 and 3 Gbps)
  • Single module, mid-size for single disk or full-size for dual disk
  • AMC.3 compliant
  • Option for Solid State Drive or Rotary Disk
View product AMC624 Data Sheet

AMC620

2.5” SATA HBA with 6Gbps Disk Drive

  • 2.5” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
  • AMC.1 x2 PCIe Gen 2
  • Supports SATA ports at 6.0 Gbps
  • Single Mini-SAS SFF-8644 (SAS HD Interconnect System)
  • Independent disk or RAID 0, 1 and 10
  • Single module, compact-size (mid-size, full-size options available)
  • IPMI 2.0 compliant
View product AMC620 Data Sheet

AMC610

AMC 4 Port Gigabit Ethernet with 2.5” Disk

  • AMC.1 and AMC.3
  • Single-width, mid size (option for full size)
  • 4 Gigabit Ethernet ports via RJ-45
  • On board 2.5” disk with direct connect toPorts 2 and 3
  • PCIe Gen2 x4 lanes to Ports 4-7
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC610 Data Sheet

AMC608

2.5” SAS/SATA, Graphics and USB

  • Single module, mid size (full size option available)
  • PCIe x4 Lane Gen2 (5.0 Gb/s per lane)
  • 2.5” SAS/SATA HDD
  • VGA Interface with 128MB of Memory
  • Resolution @ 1920x1200
  • Two USB 2.0 ports @ 480Mbits/s
  • AMC.1 and AMC.3 compliant
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC608 Data Sheet

AMC607

2.5” SAS/SATA, Graphics and Audio

  • Single module, mid size (full size option available)
  • PCIe x4 Lane
  • 2.5” SAS/SATA HDD
  • DVI-I Interface with 128MB of GDDR3
  • Support of the latest high-resolution and wide-screen displays such as QXGA(2048x1536) @ 75Hz, 2560x1600 @ 60Hz
  • HDMI Connection for 480p, 720p, and1080i
  • Multi-channel 5.1 surround audio
  • Optimized for DirectX 10
  • AMC.1 and AMC.3 compliant
  • Active-Active 2:1 multiplexer switch
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC607 Data Sheet

AMC606

LEGACY

2.5” SAS Drive with Expansion

  • 2.5 inch SAS drive with Expansion
  • AMC.1 and AMC.3 compliance
  • PCIe x4
  • RAID 0, 1 capable
  • Single module, mid size (full size option available)
  • Heat plate on drive electronics w/ thermal pad optimizes heat removal
  • Disk RPM @ 10,025RPM
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC606 Data Sheet

AMC605

LEGACY

2.5” SAS Drive Module

  • 2.5 inch SAS drive
  • AMC.3 compliance
  • Single module, mid size (full size option available)
  • Heat plate on drive electronics w/ thermal pad optimizes heat removal
  • Disk RPM @ 10,025RPM
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC605 Data Sheet

AMC604

LEGACY

2.5” SAS/SATA, Graphics and USB 2.0

  • Single module, mid size (full size option available)
  • PCIe x4 Lane
  • 2.5” SAS/SATA HDD
  • VGA with 8MB of SDR
  • Resolution of 1280 x 1024
  • Two port USB 2.0 with Mini-USB connectors
  • AMC.1 and AMC.3 compliant
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC604 Data Sheet

AMC600

LEGACY

2.5” SATA Drive Module

  • 2.5 inch SATA drive
  • Options for AMC.1 or AMC.3 compliance
  • PCIe x1
  • Single module, compact size (mid size and full size options available).
  • IPMI 2.0 compliant
  • RoHS compliant
View product AMC600 Data Sheet

AMC - Single Disk

( expand all )
Storage modules with a single disk. Versions with a removable disk are also available.

AMC639

2.5” SAS/SATA Drive, DVI-I

AMC611

U.2 NVMe or SATA 2.5” Solid State Drive, AMC

AMC612

Network Attached Storage (NAS) AMC with NVMe Storage

AMC613

Network Attached Storage (NAS) AMC with Quad M.2 NVMe Storage

AMC638

2.5” SATA Drive, 6 Gbps RAID HBA, DVI-I

AMC627

2.5” SATA III/SAS-3 Drive, 12 Gbps RAID HBA

AMC625

2.5” SAS–3 Drive, 12 Gbps

AMC624

2.5” Dual/Single SATA III Drive, 6 Gbps

AMC620

2.5” SATA HBA with 6Gbps Disk Drive

AMC610

AMC 4 Port Gigabit Ethernet with 2.5” Disk

AMC608

2.5” SAS/SATA, Graphics and USB

AMC607

2.5” SAS/SATA, Graphics and Audio

AMC606

2.5” SAS Drive with Expansion

AMC605

2.5” SAS Drive Module

AMC604

2.5” SAS/SATA, Graphics and USB 2.0

AMC600

2.5” SATA Drive Module

FMC - Storage

FMC257

Dual NVMe Solid State Drives, FMC Storage and RS-485/RS-422, Singled Ended +3.3V

  • FMC Compact storage module
  • FMC with dual NVMe type Solid State Drive (SSD)
  • High performance with dual PCIe Gen3 x4 interface
  • Self-Encrypting Drive (SED) option
  • 8 x RS-485/RS-422 TX with speed up to 20 Mbps
  • 8 x RS-485/RS-422 RX with speed up to 52 Mbps
  • 8 x Singled-ended +3.3 V input or output
View product FMC257 Data Sheet

FMC - Storage

( expand all )

FMC257

Dual NVMe Solid State Drives, FMC Storage and RS-485/RS-422, Singled Ended +3.3V

VPX Storage

( close )

VPX645

NVMe HBA with RAID (0, 1, 5, 6, 10, 50 and 60), 3U VPX

  • 3U VPX NVMe Host Bus Adapter with Full support for RAID
  • Dual Core ARM A15 RAID On Chip (ROC)
  • Onboard 8 GB of DDR4 Memory with ECC
  • Hardware Engine for RAID 5 and RAID 6 acceleration
  • PCIe Gen3 x8 or x4
  • Health Management through dedicated Processor
View product VPX645 Data Sheet

VPX640

NVMe HBA, with Quad M.2 NVMe Solid State Drives, 3U VPX

  • 3U VPX NVMe Host Bus Adapter with quad M.2 NVMe type SSD
  • Allows for M.2 Type 2280 and/or 22110
  • PCIe Gen3 x8 or dual x4 to the backplane
  • PCIe x4 Gen3 to each M.2 Socket
  • Health Management through dedicated Processor
View product VPX640 Data Sheet

VPX611

U.2 NVMe Solid State Drive, PCIe Gen4 in 3U VPX

  • 3U VPX Solid State Drive (SSD) with U.2 form factor
  • PCIe Gen4 x4
  • Storage up to 30TB in single 2.5” 15mm height
  • IPMI 2.0 compliant
View product VPX611 Data Sheet

VPX Storage

( expand all )

VPX645

NVMe HBA with RAID (0, 1, 5, 6, 10, 50 and 60), 3U VPX

VPX640

NVMe HBA, with Quad M.2 NVMe Solid State Drives, 3U VPX

VPX611

U.2 NVMe Solid State Drive, PCIe Gen4 in 3U VPX

XMC Storage

XMC645

XMC Storage with Octal NVMe Solid State Drives

  • XMC Storage
  • PCIe x8 Gen4 to host
  • Eight one TB of NVMe SSD devices
  • PCIe x4 Gen3 to each SSD
  • 8 TB Storage
View product XMC645 Data Sheet

XMC Storage

( expand all )

XMC645

XMC Storage with Octal NVMe Solid State Drives