1U Chassis, Deep, 12 AMC, PCIe

LEGACY *
  • Twelve mid size AMC slots per 1U Carrier or six double module, mid size AMC slots
  • Cascade any number of 1U Carriers for expansion and management
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • AMC.1, AMC.2 and AMC.3 compliant
  • Fabric Expansion to other 1U chassis
  • PCIe Gen 2 Switch (ports 4 to 7)
  • GbE Managed Layer Two (ports 0 and 1)
  • Telco Alarm and Carrier Locator
  • JTAG Switch Module (JSM) with front port access
  • Telcom/GPS Clock on TCLKA, TCLKB, TCLKC and TCLKD and Fabric Clock on FCLK
  • Redundant, removable 1+1 Power supply and Cooling Units (CU)
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare
0

The VT850 is a 1U μTCA chassis that provides twelve mid size AMC slots that can accept any AMC.1 (ports 4 to 7), AMC.2 (ports 0 and 1) and AMC.3 (ports 2 and 3 are routed to adjacent slots). It provides FLCK, TCLKA, TCLKB, TCLKC and TCLKD to each AMC. The VT850 has redundant power supplies as well as redundant Cooling Units for high availability. The power supplies, Air Filter and Fan Trays are all hot swappable. The chassis has a JTAG Switch Module (JSM) per μTCA specification. This provides transparent communication 6between the front JTAG port and the selected AMC device. It can operate up to 50MHz. 

The 1U chassis runs VadaTech proven second generation Management software based on it’s VT002 product. The shelf manager implements IPMI management, FRU management, and shelf environment management for power, thermal, E-keying, etc. The VT002 can run as the Shelf/MCMC or MCMC.

Key Features
  • Twelve mid size AMC slots per 1U Carrier or six double module, mid size AMC slots
  • Cascade any number of 1U Carriers for expansion and management
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • AMC.1, AMC.2 and AMC.3 compliant
  • Fabric Expansion to other 1U chassis
  • PCIe Gen 2 Switch (ports 4 to 7)
  • GbE Managed Layer Two (ports 0 and 1)
  • Telco Alarm and Carrier Locator
  • JTAG Switch Module (JSM) with front port access
  • Telcom/GPS Clock on TCLKA, TCLKB, TCLKC and TCLKD and Fabric Clock on FCLK
  • Redundant, removable 1+1 Power supply and Cooling Units (CU)
  • IPMI 2.0 compliant
Benefits
  • Front and rear load chassis for extra slots in same chassis height
  • Utilizes VadaTech’s proven 2nd generation shelf manager
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC008

μTCA JTAG Switch Module (JSM)

  • JTAG Switch Module (JSM) per μTCA specification
  • Provides transparent communications between the arbitrated master and a selected secondary port
  • Mates directly to the chassis that have a JSM connector (standard compact-size AMC panel)
  • Supports up to 12 AMCs, 2 MCHs, 4 Power Modules, 2 Cooling Units and front/rear (21) ports
  • Operates via front/rear, or the 2 MCHs
  • Auto-detection of port presence
  • Three arbitrated master ports
  • Configuration mode uses IEEE 1149.1 TAP controller
  • Operation up to 50 MHz
  • LEDs for activity, master grant and secondary port selection
View product UTC008 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications. Call VadaTech for more Information.