DC Power Module, 936W
LEGACY *
- Single module, full-size per AMC.0
- Dual -36V DC to -75V DC input, 936W (available in 468W)
- Hot swappable with support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
Download Datasheet Add to Info Request
add to compare
UTC020 is a 936W power module (available in 468W) for use in a MTCA chassis. The power module runs at 95% efficiency when running at maximum load. This results in over 890W available to the system. It is fully compliant with the MicroTCA.0 revision 1.0 specification; including dual-redundant I2C buses (IPMB-0).
The UTC020 is hot-swappable and fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MTCA Carrier Hubs (MCHs) as well as the Cooling Units (CUs).
Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault.
Once installed in the system the firmware is upgradable via the shelf manager. The UTC020 can be configured to power and enable the modules without the presence of an MCH.
VadaTech’s power modules have individual power status LEDs for each payload slot. Other indicator LEDs include MCH, Cooling Units, and Fuse.
Key Features
- Single module, full-size per AMC.0
- Dual -36V DC to -75V DC input, 936W (available in 468W)
- Hot swappable with support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
Benefits
- Highest power DC PSU for MicroTCA in industry (936W)
- Modifiable to rugged conduction-cooled version
- Very low ripple voltage
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
UTC003
for Conduction Cooled μTCA Chassis
- Single module, full size module per AMC.0
- 400MHz RISC CPU with 64MB DDR
- for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
- Redundant boot system
- ensures fail-safe upgrades
- Fail-over with dual UTC003 in system
- GbE to each AMC (Layer 2 managed)
- Non-blocking PCIe x4 Gen 2 to each AMC slot with option for SRIO or 10GbE (Layer 3 managed)
- Fabric clock with Spread Spectrum capability
- Linux 2.6 embedded OS
- IPMI 2.0 and HPM.1 compliant
- Can run as an IPMI protocol analyzer to monitor all the I2C Busses
View product
UTC003 Data Sheet
VT811
8U uTCA.4 Chassis Platform
- uTCA.4 Chassis Platform with rear I/O
- 19” x 8U x 14.9” deep (with handles 16.23” deep)
- Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
- Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
- Provision to route cables from the front to the back
- Radial I2C bus to each AMC
- High-speed 30 layer passive backplane
- Redundant FRU information devices and carrier locator
- Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT811 Data Sheet
VT899
7U uTCA Cube Chassis, 6 AMC
- 7U μTCA Cube
- 5” x 7U x 9” deep (with handles 10” deep)
- Redundant Cooling Units
- Up to six AMCs: 6 full size single module or 3 full size double module
- Radial I2C bus to each AMC
- Single Star passive 26 layer backplane
- Redundant FRU information devices and carrier locator
- Telco Alarm
- CLK1, CLK2 and CLK3
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT899 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
