DC Power Module, 241W or 460W
- Single module, full-size per AMC.0
- 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
- Support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
- Field upgradable
- IPMI 2.0 compliant
- HPM.1 compliant
- Without the presence of an MCH the modules can be turned on
- Menu driven software for ease of configuration
- Current measure for each module
- External as well as internal WDT
Download Datasheet Add to Info Request
add to compare
The VadaTech UTC014 is a 241/460W power module for use in a μTCA chassis. The power module runs at 84% efficiency when running at maximum load. This results in 200/400W (available to the system). It is fully compliant with the MicroTCA.0 and MicroTCA.1 specifications; including dual-redundant I2C buses (IPMB-0).
The UTC014 is fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MCHs (MicroTCA Carrier Hubs) as well as the CUs.
Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault.
The firmware is upgradable via HPM.
Key Features
- Single module, full-size per AMC.0
- 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
- Support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
- Field upgradable
- IPMI 2.0 compliant
- HPM.1 compliant
- Without the presence of an MCH the modules can be turned on
- Menu driven software for ease of configuration
- Current measure for each module
- External as well as internal WDT
Benefits
- Very low ripple voltage
- Support for power module redundancy
- Efficient re-use of existing designs/components reduce costs
- Electrical, mechanical, software and system-level expertise in house
- Full ecosystem of front and rear boards, enclosures, speciality modules, and test/dev product from one source
Specifications
Block diagram
Related Products
AMC720
Xeon E3-1125 Processor AMC, PCIe
- Intel® Xeon™ E3 processor
- Conduction cooled version available
- Single module, mid-size per AMC.0
- PCIe Gen2
- Gen3 on v2 option
- x4 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
- GbE to port 0 and 1 (AMC.2) and SATA to port 2 and 3 (AMC.3)
- Dual GbE to the front panel
- Up to 16 GB of DDR3 w/ ECC and 32 GB Flash
- Option for 32 GB SATA drive
- Serial over LAN
- IPMI 2.0 compliant
View product
AMC720 Data Sheet
UTC004
3rd Gen MicroTCA Carrier Hub (MCH), 40GbE/PCIe Gen 3
- Unified 1 GHz quad-core CPU for MCMC (MicroTCA Carrier Management Controller), Shelf Manager, Clocking, and Fabric management
- Automatic fail-over with redundant UTC004s
- 1GbE base switch with dual 100/1000/10G uplink
- Full Layer 2 or 3 managed Ethernet switches
- Non-blocking PCIe Gen 3, SRIO Gen 2, 10GbE/40GbE, or Crossbar Switch option to AMC fat pipes with options for up to 40GbE uplink
- Low-jitter M-LVDS clock distribution crossbar matrix
- PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
- Single module, full size per AMC.0
View product
UTC004 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
