AMC Dual Port 40 GbE with QSFP+

  • AMC.1 compliant
  • PCIe Gen3 (x4 or x8)
  • Dual QSFP+
  • 40Gbps full duplex bandwidth
  • TCP Segmentation off load: up to 256KB
  • Jumbo Frames of up to 15.5KB
  • IPV6 Support for IP/TCP
  • Dynamic Interrupt moderation
  • RoHS compliant
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC230 is a single width, mid-size AdvancedMCTM (AMC) based on the AMC.1 specification (full-size option available). The AMC230 provides dual 40 Gigabit Ethernet via front panel QSFP+.

The AMC230 supports IEEE802.1AE LinkSec Specifications. The module can off-load IPsec for up to 1024 Security Associations (SA) for each TX and RX.The AMC230 provide wire speed dual-port 40GbE throughput. The module reduces end-to-end latency for high priority traffic. In order to enhance the CPU utilization, the module supports Receive Side Coalescing(RSC).

The AMC230 supports the IEEE P802.1AE LinkSec specification. It incorporates an in-line packet crypto unit, off-load IPSec for up to 1024 Security Associations (SA), AH and ESPprotocols for authentication and encryption, AES-128-GMAC and AES-128-GCM.

Key Features
  • AMC.1 compliant
  • PCIe Gen3 (x4 or x8)
  • Dual QSFP+
  • 40Gbps full duplex bandwidth
  • TCP Segmentation off load: up to 256KB
  • Jumbo Frames of up to 15.5KB
  • IPV6 Support for IP/TCP
  • Dynamic Interrupt moderation
  • RoHS compliant
  • IPMI 2.0 compliant
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC249

12 Port Managed Layer 2 or 3 GbE Switch, AMC

  • Octal 10/100/1000BaseT Ethernet via RJ-45 ports on front panel
  • Dual 10GbE & Dual 1GbE routed to rear
  • Support up to 32K MAC addressPacket
  • Support for IEEE802.1ad, IEEE802.1ah andIEEE802.1Qay
  • Synchronous Ethernet layer one clock recovery
  • Packet-based time synchronization IEEE1588 and IEEE802.1AS
View product AMC249 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.