AMC Dual-port 10GbE, RJ-45
- Dual 10GbE over RJ45
- PCIe Gen3 x4 lanes, AMC.1 compliant
- IEEE P802.1AE LinkSec
- IPV6 Support for IP/TCP
- 10Gb/s full duplex bandwidth
- TCP Segmentation off load: up to 256 KB
- Jumbo Frames of up to 15.5 KB
- Dynamic Interrupt moderation
- Eight VLAN L2 Filters
- 16 Flex L3 Port Filters
- Four L3 Address Filters (IPV4)
- Four L3 Address Filters (IPV6)
- IPMI 2.0 compliant
- RoHS compliant
Download Datasheet Add to Info Request
add to compare
The AMC232 is a single-width, mid-height AdvancedMCTM (AMC) based on the AMC.1 specification (full-height option available). The AMC232 provides Dual 10 Gigabit Ethernet via front panel RJ-45.
The AMC232 supports IEEE802.1AE LinkSec Specifications. The module can off-load IPsec for up to 1024 Security Associations (SA) for each TX and RX.
The AMC232 provide wire speed dual-port 10GbE throughput. The module reduces end-toend latency for high priority traffic. In order to enhance the CPU utilization, the module supports Receive Side Coalescing (RSC).
The AMC232 supports the IEEE P802.1AE LinkSec specification. It incorporates an in-line packet crypto unit, off-load IPSec for up to 1024 Security Associations (SA), AH and ESP protocols for authentication and encryption, AES-128-GMAC and AES-128-GCM.
Key Features
- Dual 10GbE over RJ45
- PCIe Gen3 x4 lanes, AMC.1 compliant
- IEEE P802.1AE LinkSec
- IPV6 Support for IP/TCP
- 10Gb/s full duplex bandwidth
- TCP Segmentation off load: up to 256 KB
- Jumbo Frames of up to 15.5 KB
- Dynamic Interrupt moderation
- Eight VLAN L2 Filters
- 16 Flex L3 Port Filters
- Four L3 Address Filters (IPV4)
- Four L3 Address Filters (IPV6)
- IPMI 2.0 compliant
- RoHS compliant
Benefits
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level expertise in house
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC211
AMC Dual Port 10GbE Module, SFP+
- AMC.1 compliant
- PCIe Gen2 x8 lanes
- Dual SPF+
- 10Gb/s full duplex bandwidth
- TCP Segmentation off load: up to 256KB
- Jumbo Frames of up to 15.5KB
- IPV6 Support for IP/TCP
- Dynamic Interrupt moderation
- Eight VLAN L2 Filters
- 16 Flex L3 Port Filters
- Four L3 Address Filters (IPV4)
- Four L3 Address Filters (IPV6)
- IEEE P802.1AE LinkSec
- OS support for:
View product
AMC211 Data Sheet
UTC020
DC Power Module, 936W
- Single module, full-size per AMC.0
- Dual -36V DC to -75V DC input, 936W (available in 468W)
- Hot swappable with support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
View product
UTC020 Data Sheet
VT866
5U µTCA Chassis, 12 Full Size AMC, 40GbE
- μTCA System Platform 19” x 5U x 10.5” deep (with handles 12” deep)
- Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and dual Power Modules
- Up to 12 AMCs in single width/full-size
- Radial I2C bus to each AMC
- High-speed routing on 36 layers
- 40GbE capable
- Redundant FRU information devices and carrier locators
- Redundant 1000W AC or DC Power supply
- Telco Alarm
- FCLKA, TCLKA, TCLKB, TCLKC and TCLKD with advanced redundancy capability
- JTAG Switch Module (JSM) option
- No active components on the backplane
- ESD-Jack at the top front
- RoHS compliant
View product
VT866 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
