Mezzanine for MRT523, 12 Channel Variable Gain
- Mezzanine module for MRT523
- Routes 12 analog inputs, 2 analog outputs and CLK IN from rear panel SMPM to mezzanine connector
- Routes TRIG IN/OUT, user I/O routed from rear panel DensiShield to mezzanine connectors
- Per channel AC/DC selection and programmable gain
- RoHS compliant
Download Datasheet Add to Info Request
add to compare
The MZ523B is a mezzanine module for VadaTech’s MRT523. The AMC/MRT523 combination provides 12-channel ADC 16-bit @ 125 MSPS, and this mezzanine routes analog inputs to the ADC.
The MZ523B provides user-programmable selection, per channel, of AC or DC coupling andinput gain. The user can set these parameters via the rear-panel or by an I2C controller in the AMC523 FPGA.
- ADC gain selection per channel allows analog input signal +/-0.5V, +/-1V, +/-5V or +/-10V
- AC coupling or DC coupling selection per channel
- 50Ω or 1MΩ impedance selection per channel (1MΩ fixed for +/-10V input voltage)
The selection of the configuration per channel is persistent over system power cycles.
The MZ523B complies with the MRT523 Mezzanine Interface Specification, which can be made available to research partners to allow them to develop their own application-specific mezzanine modules.
Key Features
- Mezzanine module for MRT523
- Routes 12 analog inputs, 2 analog outputs and CLK IN from rear panel SMPM to mezzanine connector
- Routes TRIG IN/OUT, user I/O routed from rear panel DensiShield to mezzanine connectors
- Per channel AC/DC selection and programmable gain
- RoHS compliant
Benefits
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC523
Dual DAC 16-bit @ 250 MSPS, Kintex-7, MTCA.4
- Dual DAC 16-bit @ 250 MSPS utilizing MAX5878 device (user programmable for lower sampling rate)
- Xilinx Kintex-7 FPGA XC7K410T in FFG900 package
- Supported by DAQ Series™ data acquisition software
- 2 GB of DDR3 memory
- Internal clock or precision external clock from RTM/backplane/front panel clocks
- Trig in/out configurable by software (external trigger via front or port 17)
- x8 PCIe (or dual x4)
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
- Quad SFP+ (up to 6.6 Gbps)
- JTAG selectable front and backplane
View product
AMC523 Data Sheet
MRT523
MTCA.4 RTM for AMC523, 12 Ch ADC 16-bit @ 125 MSPS
- MicroTCA.4 RTM for the AMC523
- Twelve channel ADC 16-bit @ 125 MSPS utilizing AD9653 device routed to AMC523
- Two analog outputs from AMC523’s DACs Mezzanine
- ADC and DAC signal routed through amezzanine
- Three pairs of user defined digital I/O
- Double module, mid-size (full-size optional)
View product
MRT523 Data Sheet
VT811
8U uTCA.4 Chassis Platform
- uTCA.4 Chassis Platform with rear I/O
- 19” x 8U x 14.9” deep (with handles 16.23” deep)
- Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
- Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
- Provision to route cables from the front to the back
- Radial I2C bus to each AMC
- High-speed 30 layer passive backplane
- Redundant FRU information devices and carrier locator
- Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT811 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
