ATCA Shelf Manager and Managed Layer 2 Switch for VT834
- Quad core ARM processor @ 1 GHz per core
- One GB DDR3 Memory
- Onboard managed layer 2 switch
- FRAM for log messages
- Field upgradable with dual boot Flash
- Telco alarm with Micro DB15 connector front panel interface
- Isolated DC/DC converter
- IPMI 2.0 compliant
Download Datasheet Add to Info Request
add to compare
The VadaTech VT036 is a Shelf Manager for the VT834 chassis. It has a layer two managed switch with four ports routed to the front panel, four ports to the rear and one to the onboard shelf manager CPU. The unit has a power consumption of 7W.
The VT036 can also run as a protocol analyzer to monitor, inject, capture and validate I2C traffic on the Intelligent Platform Management Bus (IPMB) buses. Each IPMI bus has a 64-byte FIFO to allow for a full IPMI packet on each I2C bus so there is no packet loss during operation.
A Graphical User Interface (GUI) validates and displays the IPMI packets or schedules IPMI messages for injection into the shelf. The GUI application communicates with the VT036 through the Ethernet port.
When two VT036s are in the system, they operate in redundant active/standby mode. During operation one VT036 is active while the second one is synchronized in hot standby mode. The VT036 is fully hot-swappable to minimize service down time. Lithium Battery and/or Super CAP for the Real Time Clock.
Key Features
- Quad core ARM processor @ 1 GHz per core
- One GB DDR3 Memory
- Onboard managed layer 2 switch
- FRAM for log messages
- Field upgradable with dual boot Flash
- Telco alarm with Micro DB15 connector front panel interface
- Isolated DC/DC converter
- IPMI 2.0 compliant
Benefits
- Active/standby redundancy when utilizing two VT036s
- Rich set of Management software such as HPI, RMCP, SNMP, CLI, HTTP, etc.
- VT036 can run as an IPMI protocol analyser to monitor all IPMB buses
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
ATC126
Rugged Blade Processor w/ Dual Xeon E5
- Dual 14-core Intel® Xeon® E5-2658, 2680 or 2648L v4 processors
- Eight banks of DDR4 with ECC for up to 256 GB memory
- 10/40GbE Fabric channels
- Dual 10/100/1000Base-T Base Channels
- Dual 10/100/1000Base-T egress Ports
- Dual 10GbE Copper
- Two USB 2.0 and two USB 3.0 front panel Ports
- Graphics and RS-232 front panel Ports
- IPMI Management Controller with Serial Over LAN capabilities (SOL)
- Trusted Platform Module (TPM)
- BIOS redundancy boot with multiple Watch Dog Timers (WDT) for fail-over, before and after BIOS boot
View product
ATC126 Data Sheet
VT830
6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers
- 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
- 10GbE/GbE Managed Layer 2
- 40GbE/10GbE/GbE Managed Layer 3
- 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
- Split power distribution (odd slots on A1/B1,even slots on A2/B2)
- Redundant Power supplies AC (DC or AC/DC optional)
- Up to four AC supply at 1300W each (N+1)
- 6 Rear Transition Module (RTM) slots
View product
VT830 Data Sheet
VT835
3U ATCA Hybrid Chassis with 8 AMCs AMCs (Mid-size)
- 19” rack mount 3U ATCA Hybrid AMC Chassis
- 1x ATCA slot, 8 mid-size AMC slots and 2x ATCA RTM slots
- 40G or 10G fabric across the backplane
- x8 PCIe Gen3, x4 Gen3 SRIO, or Layer 2/3 managed 10GbE/40GbE dual XAUI
- Redundant push/pull cooling configuration
- Integrated dual shelf managers, switch and AMC carrier
- Full redundancy for all FRUs
- Redundant AC or DC Power Modules
- ESD Jack
View product
VT835 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
