ATCA/AMC/VPX IPMI Controller, 2nd Generation
- Complete ATCA/AMC/VPX IPMI compliant reference design with software
- H8S Renesas Processor R4F2153
- 512K of Flash with 40K of SRAM
- Integrated Flash/SRAM, WDT, A/D, Quad I2C Master/Slave I2C, dual RS-232
- Payload communication via I2C
- Used on all VadaTech ATCA/AMC/VPX products
- 10x10 mm in BGA Package
Download Datasheet Add to Info Request
add to compare
The VT025 is a reference schematic which provides a complete hardware and software solution that occupies only a 15mm x 15mm space on the ATCA/AMC/VPX module and dissipates less than 0.2 watts. The CPU is based on Renesas H8S processor (R4F2153, packaged in a 10mm x 10mm, in BGA package) with integrated flash, quad I2C, dual RS-232, WDT, RTC, 10-bit A/D, etc.
The VT025 provides the quickest way to design for the ATCA/AMC/VPX form factor without prior IPMI knowledge. The VT025 firmware is field upgradeable and configurable via the I2C bus.
In most cases the VT025 can provide all the necessary ATCA/AMC/VPX IPMI functionality without modification. If support is required, VadaTech will provide support at minimal charge. For customers wishing to customize the binary, the VT025 development kit is all that is needed to add enhancements. The development tools are based on the GCC tool chain.
The VT025 is the most cost-effective solution in the market. The R4F2153 can be purchased from VadaTech pre-programed.
An NDA is required to obtain the reference schematic.
Key Features
- Complete ATCA/AMC/VPX IPMI compliant reference design with software
- H8S Renesas Processor R4F2153
- 512K of Flash with 40K of SRAM
- Integrated Flash/SRAM, WDT, A/D, Quad I2C Master/Slave I2C, dual RS-232
- Payload communication via I2C
- Used on all VadaTech ATCA/AMC/VPX products
- 10x10 mm in BGA Package
Benefits
- 2nd Generation IPMI Controller
- Compact size with low power consumption
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Related Products
ATC133
10GbE Carrier w/ 4 Full-Size AMC Slots
- 10G ATCA Carrier
- Managed Layer 2 software
- Four full-size AMC slots
- Xilinx Virtex-7 FPGA
- (XC7V690T in FFG1761 package)
- Crossbar switch to connect FPGA to full mesh of backplane fabric
- 2x XAUI ports and 2x GbE ports for each AMC slot
- 4x XAUI ports for RTM expansion
- Utilizes VadaTech’s proven IPMI Management Controller
View product
ATC133 Data Sheet
VT000
ATCA Power Module
- Powers a single ATCA module
- IPMI hardware address and parity
- Fuse on each of the power rails
- Enable switch
- Connector for IPMI Bus A and B
- Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
- Test points
- RoHS compliant
View product
VT000 Data Sheet
VT830
6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers
- 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
- 10GbE/GbE Managed Layer 2
- 40GbE/10GbE/GbE Managed Layer 3
- 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
- Split power distribution (odd slots on A1/B1,even slots on A2/B2)
- Redundant Power supplies AC (DC or AC/DC optional)
- Up to four AC supply at 1300W each (N+1)
- 6 Rear Transition Module (RTM) slots
View product
VT830 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
