μTCA JTAG Switch Module (JSM)
- JTAG Switch Module (JSM) per μTCA specification
- Provides transparent communications between the arbitrated master and a selected secondary port
- Mates directly to the chassis that have a JSM connector (standard compact-size AMC panel)
- Supports up to 12 AMCs, 2 MCHs, 4 Power Modules, 2 Cooling Units and front/rear (21) ports
- Operates via front/rear, or the 2 MCHs
- Auto-detection of port presence
- Three arbitrated master ports
- Configuration mode uses IEEE 1149.1 TAP controller
- Operation up to 50 MHz
- LEDs for activity, master grant and secondary port selection
Download Datasheet Add to Info Request
add to compare
The UTC008 is a JTAG Switch Module for interface to all slots via one module for prototyping/debugging and software updates. The power comes from the management (+3.3 V) or the payload (+12 V) depending on the chassis configuration. The UTC008 consumes less than 55 mW. The front connector is standard 0.1 header which mates to most JTAG modules. There are three arbitrated master ports (2 MCH and the front/rear connector). The secondary ports are auto detected if they are present. The modules provides transparent communication between the master and a selected secondary port. All configuration modes uses IEEE1149.1 TAP controller. The JTAG can operate with up to 50 MHz clock.
Key Features
- JTAG Switch Module (JSM) per μTCA specification
- Provides transparent communications between the arbitrated master and a selected secondary port
- Mates directly to the chassis that have a JSM connector (standard compact-size AMC panel)
- Supports up to 12 AMCs, 2 MCHs, 4 Power Modules, 2 Cooling Units and front/rear (21) ports
- Operates via front/rear, or the 2 MCHs
- Auto-detection of port presence
- Three arbitrated master ports
- Configuration mode uses IEEE 1149.1 TAP controller
- Operation up to 50 MHz
- LEDs for activity, master grant and secondary port selection
Benefits
- Allows interface to all slots in one module, only need to plug dongle to one slot
- Ideal for prototyping/debugging and software uploads within MicroTCA system
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level expertise in house
- Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
UTC002
MicroTCA Carrier Hub, 2nd Generation
- 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
- Layer 2 managed GbE to each AMC (optional)
- Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
- Redundant boot system to ensure fail-safe upgrades
- Automatic fail-over with dual UTC002
- SAS/SATA to each AMC (optional)
- Telecom/GPS clock (Stratum-3)
- Fabric clock with spread spectrum capability
- Single module, full size per AMC.0
- HPM.1 and IPMI 2.0 compliant
View product
UTC002 Data Sheet
UTC020
DC Power Module, 936W
- Single module, full-size per AMC.0
- Dual -36V DC to -75V DC input, 936W (available in 468W)
- Hot swappable with support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
View product
UTC020 Data Sheet
VT861
5U uTCA Chassis, 12 AMC
- μTCA System Platform 19” x 5U x 10.5” deep (with handles 12” deep)
- Single MicroTCA Carrier Hub (MCH), dual Cooling Units and single Power Module
- Up to twelve AMCs: full size
- Radial I2C bus to each AMC
- Single Star passive 22 layer backplane
- 1000W AC Power supply option
- CLK1, CLK2 and CLK3
- ESDJack at the top front
View product
VT861 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
