13 Port Managed Layer 2 Switch, 10GbE

  • AMC.2 compliant
  • Managed Layer two 10GbE switch
  • Eight 10GbE Ethernet ports
    • via front panel SFP+ (each port has an option to run at 1GbE)
  • Three 10 GbE routed to the rear as XAUI
    • option to run as 10GBase-KR, 802.3ap
  • Two 1GbE routed to the rear with option to run as 10GBase-KR
  • Support up to 8K MAC address
  • 4K IEEE 802.1Q VLANs
  • VLAN-based packet filtering
  • Packet classification using IEEE802.1p QoS
  • 16K Jumbo frames
  • Spanning tree
  • Mirroring
  • QoS
  • SNMP and RMON
  • OS support for:
    • OS independent

Download Datasheet Add to Info Request

add to compare
0

The AMC229 is a single module, full size AdvancedMCTM (AMC) based on the AMC.2 specification. The AMC229 provide 8 front panel 10GbE ethernet ports via SFP+. It routes two 1GbE (these could run as 10GBase-KR, 802.3ap) to ports 0 and 1. In addition it has three XAUI to ports 4-7, 8-11 and 17-20. Any of the XAUI ports could also run as 10GBase-KR. The SFP+ allows a mix of 10GbE and 1GbE transceiver. The switch is managed via telnet and supports a rich set of features such as VLAN, RSTP, QoS, Mirroring, etc. The RS-232 in the front panel can also be used to manage the switch.

Key Features
  • AMC.2 compliant
  • Managed Layer two 10GbE switch
  • Eight 10GbE Ethernet ports
    • via front panel SFP+ (each port has an option to run at 1GbE)
  • Three 10 GbE routed to the rear as XAUI
    • option to run as 10GBase-KR, 802.3ap
  • Two 1GbE routed to the rear with option to run as 10GBase-KR
  • Support up to 8K MAC address
  • 4K IEEE 802.1Q VLANs
  • VLAN-based packet filtering
  • Packet classification using IEEE802.1p QoS
  • 16K Jumbo frames
  • Spanning tree
  • Mirroring
  • QoS
  • SNMP and RMON
  • OS support for:
    • OS independent
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

VT857

1U uTCA Chassis, Deep, 12 AMC, 10GbE

  • Twelve mid-size single module AMC slots or six mid-size double module AMC slots
  • Cascade any number of 1U Carriers for expansion and management
  • Management can run as Shelf/MCMC (MicroTCA Carrier Management Controller) or MCMC
  • AMC.2 and AMC.3 compliant
  • Fabric Expansion to other 1U chassis
  • 10GbE available on ports 4-7 and 8-11
  • GbE Managed Layer Two (ports 0 and 1)
  • Telco Alarm and Carrier Locator
  • JTAG Switch Module (JSM) with front port access
  • Telecom/GPS Clock on TCLKA, TCLKB, TCLKC and TCLKD and Fabric Clock on FCLK
  • Redundant 1+1 Power supply
  • Redundant Cooling Units (CU)
  • Removable Power supply, Air Filter and Fan Trays
View product VT857 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.