ATCA COM Express™ Carrier
LEGACY *
- Supports Intel Core i-7
- DDR3 memory
- Optional CompactFlash
- 2 AMC slots per AMC.1 & AMC.3 specs
- One USB fiber port
- Five GbE ports: Two front panel fiber or copper, front copper port and two GbE ports to Zone 2
- Front panel RS-232 ports
- VGA connector (COM Express dependent)
- Two front panel accessible USB ports
- IPMI Version 2.0 compliant
Download Datasheet Add to Info Request
add to compare
The ATC120 is an AdvancedTCA COM Express™ (Computer On Module) carrier. VadaTech provides ATCA COM Express carriers designed around the customers I/O requirements. Since CPU technology is a dynamic and rapidly changing area, this design allows customers to easily upgrade the CPU while keeping their I/O structure intact. This helps to safeguard the customer’s investment. The COM Express module is built around the Intel® family of processors and is available from multiple vendors.
There are two AMC sites available for I/O expandability. The AMC slots support the AMC.1 and AMC.3 specifications.
The ATC120 can be configured as a Shelf Manager or a Node board. As a Shelf Manager, the ATC120 eliminates the need for other shelf managers which reduces the total system cost. The shelf manager implements IPMI management, FRU management, and shelf environment management for power, thermal, E-keying, etc.
Key Features
- Supports Intel Core i-7
- DDR3 memory
- Optional CompactFlash
- 2 AMC slots per AMC.1 & AMC.3 specs
- One USB fiber port
- Five GbE ports: Two front panel fiber or copper, front copper port and two GbE ports to Zone 2
- Front panel RS-232 ports
- VGA connector (COM Express dependent)
- Two front panel accessible USB ports
- IPMI Version 2.0 compliant
Benefits
- Shelf management functionality included
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level
expertise in house
- Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
ART115
ATCA Rear I/O Transition Module
- ATCA rear I/O Module for Blades
- i.e. Sun Microsystems Netra Blade CP3260,CP3220, VadaTech ATC114, etc.
- Dual DVI/VGA interface
- Resolution @ 1920x1200
- Dual 10GbE SFP+
- Removable on board 2.5” SAS/SATA Disk
- Two port USB 2.0 high speed (480Mbit/s)
- Front Blade Dual GbE to RJ-45 or LC Fiber(option for SX or LX)
- Front Blade Management RS-232 to RJ-45
- Dual RS-232 for the host blade
- IPMI 2.0 Management Controller
- RoHS compliant
View product
ART115 Data Sheet
ATC800
48-Port GbE with 10-GbE Uplink Switch
- AdvancedTCA open standard form factor
- Linux operating system
- Open Architect™ firmware
- Run as the Shelf Manager or Node board
- Five front panel 10/100/1000Base-T ports
- Nine front panel SFP ports
- Front panel XFP egress port for 10GbE
- GbE to Base Interface for 14 payload slots and Shelf Manager
- Eighteen GbE ports to Zone 3 for use with an RTM
- 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
- PICMG 3.1 compliant
- IEEE 802.3 compliant
- IPMI Version 2.0 compliant
View product
ATC800 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
