ATCA Rear Transition Module
The ART132 is an I/O expansion ATCA Rear Transition Module(ARTM) that provides PCIe, GbE, InfiniBand, USB andManagement I/O for the front blade. The module is designed tomate with Emerson front blades such as ATCA-7360 andATCA-7365.
A PCIe x8 port from zone three connector is routed to the I-Passconnector. This allows the PCIe from the host to be expandedto other modules.
The module has quad GbE MAC/PHY which mates to the hostvia PCIe x4 on the zone 3 connector and provides quad SFP tothe rear. Further, the module has a dual port InfiniBand QDRHCA which mates to the host via PCIe x8 and provides dualQSFP+ to the rear (40Gb/s per QSFP+).
The USB port from the zone 3 connector feeds into an on-boardUSB HUB and is converted to dual LC fiber ports and fivecopper ports via micro-DB-25 connector.
The ART132 also provides the management RS-232 port aswell as the host RS-232 port to the rear.
Key Features
- Quad GbE via SFP
- Dual InfiniBand 40Gb via QSFP+
- PCIe x8 via I-Pass
- Host serial
- USB Fiber and Copper
- IPMI Version 2.0 compliant
- RoHS compliant
Benefits
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level expertise in house
- Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
ATC800
48-Port GbE with 10-GbE Uplink Switch
- AdvancedTCA open standard form factor
- Linux operating system
- Open Architect™ firmware
- Run as the Shelf Manager or Node board
- Five front panel 10/100/1000Base-T ports
- Nine front panel SFP ports
- Front panel XFP egress port for 10GbE
- GbE to Base Interface for 14 payload slots and Shelf Manager
- Eighteen GbE ports to Zone 3 for use with an RTM
- 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
- PICMG 3.1 compliant
- IEEE 802.3 compliant
- IPMI Version 2.0 compliant
View product
ATC800 Data Sheet
ATC808
Low Cost 26 Port ATCA Switch
- AdvancedTCA open standard form factor
- PICMG 3.1 compliant
- Managed Layer 2 switch
- GbE to Base Interface for 15 Node slots
- One port to the update channel
- Eight front panel SFP connectors for mix of Copper and Fiber interfaces
- Support up to 8K MAC address
- 4K IEEE 802.1Q VLANs
- VLAN-based packet filtering
- Packet classification using IEEE802.1p QoS
- 9K Jumbo frames
- Spanning tree, Mirroring, QoS
- SNMP and RMON
- OS support for:
View product
ATC808 Data Sheet
VT830
6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers
- 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
- 10GbE/GbE Managed Layer 2
- 40GbE/10GbE/GbE Managed Layer 3
- 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
- Split power distribution (odd slots on A1/B1,even slots on A2/B2)
- Redundant Power supplies AC (DC or AC/DC optional)
- Up to four AC supply at 1300W each (N+1)
- 6 Rear Transition Module (RTM) slots
View product
VT830 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
