Zynq UltraScale+ FPGA Video Streaming with USB 2.0, AMC
- Xilinx UltraScale+ XCZU7EV FPGA
- Double module, full-size
- Rear Transition Module (RTM) per uTCA.4
- 4x Video Stream from the RTM
- Dual USB 2.0 from the RTM to FPGA
- Quad USB 2.0 as pass thru to front panel
- 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC to PS Side
- Dual 4 GB 32-bit wide DDR4 to the PL Side
- SD Card
- 128 MB of boot Flash
Download Datasheet Add to Info Request
add to compare
The AMC314 is an AMC FPGA module with Zynq UltraScale+ EV part. The AMC is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications. It is based on Xilinx UltraScale+ XCZU7EV MPSoC FPGA with an RTM (such as the MRT314A).
The Module has a single bank of 8GB of DDR-4 64-bit wide with ECC to the PS and in addition dual bank of x32 DDR-4 to the PL for a total of 8GB.
The RTM may provide up to four Video streaming and dual USB ports to the FPGA.
The module brings out as pass thru 4 x USB2.0 to the front.
Key Features
- Xilinx UltraScale+ XCZU7EV FPGA
- Double module, full-size
- Rear Transition Module (RTM) per uTCA.4
- 4x Video Stream from the RTM
- Dual USB 2.0 from the RTM to FPGA
- Quad USB 2.0 as pass thru to front panel
- 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC to PS Side
- Dual 4 GB 32-bit wide DDR4 to the PL Side
- SD Card
- 128 MB of boot Flash
Benefits
- Zynq UltraScale+ MPSoC
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
MRT314A
Four Video input via Optics with dual USB 2.0 over Optics MTCA.4 RTM for AMC314
- 4 RTM for the AMC314 Module
- Four Video Input over Optics
- Dual USB 2.0 over Optics (as end points)
View product
MRT314A Data Sheet
UTC006
3rd Gen MicroTCA Carrier Hub (MCH), Double Module, 40/10GbE/PCIe/FPGA/SRIO
- Fabric options include PCIe Gen3, 40/10GbE, SRIO, Cross Bar Switch (CBS) or Xilinx Virtex-7 690T FPGA for complete flexibility
- Front panel fabric expansion, e.g. quad ports forPCIe Gen 3 (x4, x8, or x16)
- PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
- Double module, full size per AMC.0 and MTCA.4
- 1GbE base switch with dual 100/1000/10 G uplink
- Full Layer 3 managed Ethernet switch
- Unified 1 GHz quad-core CPU for MicroTCA Carrier Management Controller (MCMC), Shelf Manager, Clocking, and Fabric management
- Automatic fail-over with redundant UTC006s
View product
UTC006 Data Sheet
VT813
8U uTCA.4 Chassis Platform, (3+1) 4400W
- μTCA.4 Chassis Platform with rear I/O
- 19” x 8U x 14.9” deep (with handles 16.23” deep)
- Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
- Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
- Provision to route cables from the front to the back
- Radial I2C bus to each AMC
- High-speed 30 layer passive backplane (40GbE ready)
- Redundant FRU information devices and carrier locators
- Four 1.1 kW AC Power supply for 4.4 kW total
- Telco aarm
- FCLKA, TCKA, TCKB, TCLKC AND TCLKD
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front and back
View product
VT813 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
