VT560

Xilinx Zynq ® UltraScale + FPGA, with 10GbE , CoaXPress LVDS, RS 485 , High speed SERDES and GPIO

  • Xilinx Zynq® UltraScale+ XCZU19EG FPGA
  • 16 GB of 64-bit wide DDR4 Memory (single bank) with ECC to the PS side
  • 128 MB of boot Flash and 64 GB of user Flash
  • Dual 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX
  • Support for IEEE1588-2008 Version 2-compliant Support for Synchronous Ethernet (SyncE)
  • Dual CoaXPress per CXP-12 specification
  • 17x LVDS, 2x RS-485 and 8x single ended I/O
  • Conduction cool

Download Datasheet Add to Info Request

add to compare
  • The VT560 is an integrated monolithic FPGA module in conduction cooled form-factor.
  • The VT560 is based on a Xilinx® UltraScale+ XCZU19EG MPSoC FPGA.  The FPGA has 1968 DSP Slices and 1143k logic cells. The XCZU19EG includes a quad-core ARM processor.
  • The Module has onboard 64 GB of Flash, 128 MB of boot flash and an SD Card.
  • The VT560 had dual RJ-45 connectors that can support 10GBASE-T over copper with Category 6, 6A and 7 twisted-pair cable.
  • The unit also supports 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-TX on standard Category 5e Unshielded Twisted Pair (UTP) cable.
  • The Module has transceiver-MAC to magnetics:
    • 10GBASE-T IEEE802.3an
    • 5GBASE-T IEEE802.3bz
    • 5GBASE-T IEEE8023.bz
    • 1000BASE-T IEEE802.ab
    • 100BASE-TX IEEE 802.3u
  • The VT560 supports both the IEEE1588 as well as SyncE and has a very high-end performance PLL which meets the G.8262 EEC Opt 1, 2 (SyncE).
  • In addition, the module has dual CoaXPress receivers per CXP 2.0 specification and can receive data at 12.5 Gbps with 40 meters of cable, and transmit at 21/42Mbit. It can also support up to 130 meters of cable at 1.25 Gbps.
  • The VT560 further provides 17 LVDS input/outputs, 2x RS-485, 8x +5V GPIO and high speed SERDES pair (RX+/- and TX+/- XOR). Each of the single-ended ports can be configured as input or output.

Key Features
  • Xilinx Zynq® UltraScale+ XCZU19EG FPGA
  • 16 GB of 64-bit wide DDR4 Memory (single bank) with ECC to the PS side
  • 128 MB of boot Flash and 64 GB of user Flash
  • Dual 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX
  • Support for IEEE1588-2008 Version 2-compliant Support for Synchronous Ethernet (SyncE)
  • Dual CoaXPress per CXP-12 specification
  • 17x LVDS, 2x RS-485 and 8x single ended I/O
  • Conduction cool
Benefits
  • Zynq UltraScale+ MPSoC
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC560

Xilinx Zynq® UltraScale+ FPGA, Dual FMC+ Carrier, AMC

  • Xilinx UltraScale+ XCZU19EG FPGA
  • Dual FMC+ sites
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
  • Double module, mid-size
View product AMC560 Data Sheet

AMC592

Kintex UltraScale FPGA Carrier for FMC, AMC

  • Single module, mid-size AMC (full-size optional)
  • AMC FPGA carrier for FMC per VITA 57
  • Xilinx UltraScale™ XCKU115 FPGA
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
View product AMC592 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.