12 TX/RX Fiber MTP/MPO, FMC+
- 12 full duplex transceivers on FMC+ module
- Supports link lengths up to 70 m (option for 100 m)
- Multi-rate capability, options up to 28.1 Gb/s per channel
- Total bi-directional bandwidth > 672 Gb/s
- On board Ultra-low Jitter Clock generator with two independent PLL
Download Datasheet Add to Info Request
add to compare
The FMC258 is an FPGA Mezzanine Module per VITA 57.4 (FMC+) specification. It has a single Board-Mount Optical Assembly, providing 12 channel full-duplex transceivers with Clock Data Recovery (CDR) and front-panel Fiber I/O via MTP/MPO.
Transceivers are available in two speed grades, 10.6 Gb/s and 28.1 Gb/s per channel, both with multi-rate capability. The 10.6 Gb/s can drive 100 m over OM3 MM Fiber and 28.1 Gb/s can drive 100 m over the OM4 MM Fiber.
The module has an on board Ultra-Low Jitter Clock Generator with two independent fractional PLL. The clocking allows synchronization to an external clock input or onboard. Six clocks are routed to the GBT’s on the FMC+ pinouts and two are routed to CLK0 and CLK1 for a total of 8 clock outputs.
The Module has 16 LEDs in Green/Yellow to allow for LNK/ACT, debugging or as defined by user.
Key Features
- 12 full duplex transceivers on FMC+ module
- Supports link lengths up to 70 m (option for 100 m)
- Multi-rate capability, options up to 28.1 Gb/s per channel
- Total bi-directional bandwidth > 672 Gb/s
- On board Ultra-low Jitter Clock generator with two independent PLL
Benefits
- Extremely compact fiber I/O
- Array of FMC’s and FMC+ carriers available from VadaTech
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from the industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC516
Virtex-7 FPGA Carrier for FMC, AMC
- AMC FPGA carrier for FMC per VITA-57
- Xilinx Virtex-7 690T FPGA in FFG-1761 package with optional P2040
- Supported by DAQ Series™ data acquisition software
- AMC Ports 12-15 and 17-20 are routed to the FPGA
- AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
- Single module, mid-size AMC (full-size optional)
- Clock jitter cleaner
- IPMI 2.0 compliant
View product
AMC516 Data Sheet
AMC530
Altera EP4S100G AMC FPGA
- Altera Stratix IV Device EP4S100Gx in 1517 pin count (40mm x 40mm)
- AMC Ports 2-3 and 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
- Ports 0 and 1 are Muxed with P2020 GbE
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
- On board PLL for buffering/multiplying and jitter cleaner
- Option for up to 16GB of DDR3 memory to the FPGA
- Three banks of QDR-II+ each 72-bit wide
- Option for on board Freescale QorIQ PPC2020 with up to 4GB DDR3
View product
AMC530 Data Sheet
FMC210
FMC ADC 10-bit @ 2.6 GSPS Module
- FPGA Mezzanine Card (FMC) per VITA-57
- Single ADC EV10AS150B @2.5 GSPS
- Single module
- 5 GHz Full Power Input Bandwidth (-3dB)
- True single core architecture (no calibration required)
- External Interleaving:Full scale analog input Voltage Span 500mVpp
- Gain Adjust
- Offset Adjust
- Sampling Delay Adjust
- All front panel input/outputs are via MMCX:
- Analog Input
- Reference clock
- Trig in/out
- General purpose I/O
- Super low phase noise RF PLL Synthesizer
View product
FMC210 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
