AC Power Module, 500W, Double Module
- Double module, full size module per AMC.0
- Universal AC input (85-265 VAC), 500W
- Very low ripple voltage on the +12V
- Hot swappable and support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
- Blue, Red, Amber and Green LEDs
- Field upgradable
- IPMI 2.0 and HPM.1 compliant
- Without the presence of an MCH the modules can be turned on
- Menu driven software for ease of configuration
- Current measure for each module
- Available in uTCA.1, uTCA.2 and uTCA.3
Download Datasheet Add to Info Request
add to compare
The VadaTech UTC017 is a 500W (42A @ 12V) power module for use in a μTCA chassis. It is fully compliant with the MicroTCA.0 revision 1.0 specification; including dual-redundant I2C buses (IPMB-0). The UTC017 is hot-swappable and fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MCHs (MicroTCA Carrier Hubs) as well as the CUs (Cooling Units). Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault. Once installed in the system the firmware is upgradable via the shelf manager. The UTC017 can be configured to power and enable the modules without the presence of an MCH.
Key Features
- Double module, full size module per AMC.0
- Universal AC input (85-265 VAC), 500W
- Very low ripple voltage on the +12V
- Hot swappable and support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
- Blue, Red, Amber and Green LEDs
- Field upgradable
- IPMI 2.0 and HPM.1 compliant
- Without the presence of an MCH the modules can be turned on
- Menu driven software for ease of configuration
- Current measure for each module
- Available in uTCA.1, uTCA.2 and uTCA.3
Benefits
- Wide array of power module options from VadaTech
- Modifiable to rugged conduction-cooled version
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level
expertise in house
- Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
UTC003
for Conduction Cooled μTCA Chassis
- Single module, full size module per AMC.0
- 400MHz RISC CPU with 64MB DDR
- for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
- Redundant boot system
- ensures fail-safe upgrades
- Fail-over with dual UTC003 in system
- GbE to each AMC (Layer 2 managed)
- Non-blocking PCIe x4 Gen 2 to each AMC slot with option for SRIO or 10GbE (Layer 3 managed)
- Fabric clock with Spread Spectrum capability
- Linux 2.6 embedded OS
- IPMI 2.0 and HPM.1 compliant
- Can run as an IPMI protocol analyzer to monitor all the I2C Busses
View product
UTC003 Data Sheet
UTC011
DC Power Module, 241W or 460W, Conduction-cooled
- Single module, full size module per AMC.0
- Dual 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
- Support for power module redundancy and dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
- Field upgradable
- IPMI 2.0 and HPM.1 compliant
- Without the presence of an MCH the modules can be turned on
- Menu driven software for ease of configuration
- Current measure for each module
- External as well as internal WDT
View product
UTC011 Data Sheet
VT812
2U MicroTCA.4 Chassis with 8 AMCs
- 19” x 2U x 14.2” deep chassis with redundant MCH, Power Modules and integrated Cooling Units
- Supports a mix of MTCA.0 and MTCA.4 AMCs
- 26-layer backplane
- High speed MTCA connectors (12.5 GHz)
- Radial I2C bus to each AMC and telco alarm
- JTAG Switch Module (JSM) slot for programming/debugging with front port access
- TCLKA, TCLKB, TCLKC, TCLKD and FCLKA
- Removable Air Filter, Power Module and Fan Tray
- Single or dual 500W AC Universal Power Module or dual 796W DC module
- ESD jack
- IPMI 2.0 compliant
View product
VT812 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
