DC Power Module, 396W or 792W, Double Module
- Double-module, full-size per AMC.0
- Dual DC input -36 V DC to -75 V DC 792 W (available in 396 W)
- Available in UTCA.3 conduction cooled
- Two banks of 256K Flash for redundancy
- Hot swappable
- Dual IPMI bus
- 32–bit RISC processor
- Modules can be turned on without an MCH
Download Datasheet Add to Info Request
add to compare
The VadaTech UTC013 is a 792 W power module (available in 396 W) for use in a MTCA chassis. The power module runs at 95% efficiency when running at maximum load. This results in over 752 W available to the system. It is fully compliant with the MicroTCA.0 revision 1.0 specification; including dual-redundant I2C buses (IPMB-0).
The UTC013 is hot-swappable and fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MicroTCA Carrier Hubs (MCHs) as well as the Cooling Units (CUs).
Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault.
Once installed in the system the firmware is upgradable via the shelf manager. The UTC013 can be configured to power and enable the modules without the presence of an MCH.
Key Features
- Double-module, full-size per AMC.0
- Dual DC input -36 V DC to -75 V DC 792 W (available in 396 W)
- Available in UTCA.3 conduction cooled
- Two banks of 256K Flash for redundancy
- Hot swappable
- Dual IPMI bus
- 32–bit RISC processor
- Modules can be turned on without an MCH
Benefits
- Very low ripple voltage
- Electrical, mechanical, software and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
UTC003
for Conduction Cooled μTCA Chassis
- Single module, full size module per AMC.0
- 400MHz RISC CPU with 64MB DDR
- for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
- Redundant boot system
- ensures fail-safe upgrades
- Fail-over with dual UTC003 in system
- GbE to each AMC (Layer 2 managed)
- Non-blocking PCIe x4 Gen 2 to each AMC slot with option for SRIO or 10GbE (Layer 3 managed)
- Fabric clock with Spread Spectrum capability
- Linux 2.6 embedded OS
- IPMI 2.0 and HPM.1 compliant
- Can run as an IPMI protocol analyzer to monitor all the I2C Busses
View product
UTC003 Data Sheet
UTC011
DC Power Module, 241W or 460W, Conduction-cooled
- Single module, full size module per AMC.0
- Dual 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
- Support for power module redundancy and dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
- Field upgradable
- IPMI 2.0 and HPM.1 compliant
- Without the presence of an MCH the modules can be turned on
- Menu driven software for ease of configuration
- Current measure for each module
- External as well as internal WDT
View product
UTC011 Data Sheet
UTC020
DC Power Module, 936W
- Single module, full-size per AMC.0
- Dual -36V DC to -75V DC input, 936W (available in 468W)
- Hot swappable with support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
View product
UTC020 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
