36 Copper to Fiber Conversion with Loop-back Capabilities
- 36 Copper to Fiber conversion in stand-alone unit
- Each RX input goes through ReDriver/Conditioner with Equalization
- Rate and Coding agnostic
- Allows host to loop-back on transmit and receive the data
- Rates up to 10.5Gbit supported
- Copper via OCuLink connector
- 36 Ports of fiber via 3 MTP/MPO Fiber
Download Datasheet Add to Info Request
add to compare
The VT218 is a standalone unit which supports 36 serialized data connections via copper and converts them to fiber. Fiber input/out is via three MTP/MPO connectors. The unit allows the host to do a loop-back to test the fiber link before connection to the source RX side.
The VT218 receives its power via a DSUB-9. The input power is +12V and there is a I2C bus that allows the host to manage the VT218 (i.e. such as initiating the loop-back, reading the temp sensors, configuring the ReDriver/Conditioner, etc.). The loop-back can be configured in groups of four lanes and can be simultaneous across all groups. Individual lane loop-back is not supported.
The unit has user defined LED’s that the host can control via a I2C bus.
The VT218 has internal fans that cool the system. The fan speed is adjustable via a front panel knob.
Key Features
- 36 Copper to Fiber conversion in stand-alone unit
- Each RX input goes through ReDriver/Conditioner with Equalization
- Rate and Coding agnostic
- Allows host to loop-back on transmit and receive the data
- Rates up to 10.5Gbit supported
- Copper via OCuLink connector
- 36 Ports of fiber via 3 MTP/MPO Fiber
Benefits
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply by industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
PCI592
PCIe FPGA Carrier for FMC+, Kintex UltraScaleā¢
- PCIe FPGA carrier for FMC+ per VITA 57
- Xilinx Kintex UltraScale™ XCKU115 FPGA
- Active cooling for FPGA and FMC+
- Dual x8 lanes for direct connection to neighbouring FPGA card(s)
- Two banks of 64-bit wide and a single bank of 32-bit wide DDR4 for a total of 20 GB
View product
PCI592 Data Sheet
PCI596
PCIe FPGA Carrier for FMC+, VU13P UltraScale+TM
- PCIe x16 FPGA carrier for FMC+ per VITA 57.4
- Xilinx UltraScale+™ VU13P FPGA
- Allows expansion of a daughter card on top of the FMC for more I/O
- Active cooling for FPGA, FMC+ and the daughter card module
- ADC 12-bit @ 6.4 GSPS (ADC12DJ3200)
- Dual DAC 16-bit @ 12 GSPS (AD9164)
- Dual x8 lanes for direct connection to neighbouring FPGA card(s)
- Single bank of 64-bit wide for 16 GB total
View product
PCI596 Data Sheet
PCI597
PCIe VU13P UltraScale+TM with Massive Optical I/O
- Dual PCIe x16 FPGA
- 72 fiber transceivers egress ports
- Optical speed choice of 10G or 28G per link
- Xilinx UltraScale+™ VU13P FPGA
- Active cooling for FPGA
- Dual x8 or single x16 lanes for direct connection to neighboring FPGA card(s)
- Dual bank of 64-bit wide DDR4 for 32 GB total
View product
PCI597 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.