AMC705
- (similar products)
- AMC719 - QorIQ P40x0 Processor AMC, SRIO
- AMC718 - QorIQ P40x0 Processor AMC, PCIe Gen 2
- AMC717 - QorIQ P2020 Processor AMC
- AMC715 - PPC8315 Processor AMC w/ 2.5” SATA Drive
- AMC714 - PrAMC based on QorIQ P5010/5020, SRIO
- AMC713 - QorIQ P5010/5020 Processor AMC, PCIe
- AMC711 - QorIQ P204x Processor AMC
- AMC710C - PrAMC based on QorIQ P4040/P4080, 10 GbE, SFP+
- AMC709 - LS1046A Processor AMC, 10GbE
- AMC708 - LS1046A Processor AMC, PCIe
- AMC704 - QorIQ P5040 Processor AMC, PCIe
- AMC703 - Processor AMC based on QorIQ T4241, PCIe
- AMC702 - Processor AMC based on QorIQ T4240
Processor AMC, Layerscape LX2160A, SRIO/PCIe
- Processor AMC with Layerscape LX2160A
- Two banks of 64-bit DDR4 memory (16 GB total)
- Ports 4-7 selectable between SRIO and PCIe
- Ports 8-11 option for PCIe x4 (or single x8 ports 4-11)
- 100GbE/40GbE via QSFP28 or as Quad 10GbE
- GbE via RJ-45 and 10GbE/GbE ports 0 and 1
- 64Gb Flash
- SDHC socket
- 16 cores at up to 2.2 GHz
- Single-module, full-size per AMC.0
- RoHS Compliant
Download Datasheet Add to Info Request
add to compare
The AMC705 is a Processor AMC (PrAMC) based on the NXP Layerscape LX2160A in a single-module, full-size AMC form factor based on the AMC.1, AMC.2 and the AMC.4 specifications. The LX2160A provides 16 Cortex- A72 cores with 8 MB platform cache and dual 64-bit memory controllers.
The front panel provides GbE via RJ-45 connector and 100GbE/40GbE/Quad-10GbE via QSFP28 connector.
The AMC705 provides dual 10/1GbE to the rear per AMC.2 specification on Ports 0 and 1. Ports 0 and 1 will support 10G operation but this is outside the AMC standard (MCH with 10G on ports 0/1 or point to point on backplane is required). The 10GbE support on ports 0 and 1 allows only 40GbE on the front panel. If 100GbE is desired ports 0 and 1 must run at 1GbE.
Ports 4-7 can be configured as SRIO or PCIe. The module has option for PCIe on port 8-11. When ports 8-11 are routed, the module could be configured as dual PCIe x4 or single x8.
Two 64-bit wide memory banks provide up to 16 GB of DDR4 with ECC.
Key Features
- Processor AMC with Layerscape LX2160A
- Two banks of 64-bit DDR4 memory (16 GB total)
- Ports 4-7 selectable between SRIO and PCIe
- Ports 8-11 option for PCIe x4 (or single x8 ports 4-11)
- 100GbE/40GbE via QSFP28 or as Quad 10GbE
- GbE via RJ-45 and 10GbE/GbE ports 0 and 1
- 64Gb Flash
- SDHC socket
- 16 cores at up to 2.2 GHz
- Single-module, full-size per AMC.0
- RoHS Compliant
Benefits
- 16 ARM Cortex-A72 CPU cores, running up to 2.2 GHz
- 8 MB cache/on-chip memory
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC725
Xeon E3 Processor, 10GbE, MTCA.4, Double Module, AMC
- Double-module, mid-size per AMC.0 and MTCA.4
- Intel® Xeon E3 processor options with PCH
- DVI graphics (SM750 w/ 16 MB DDR) up to 1920x1440 resolution
- PCIe Gen3 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
- GbE on ports 0 and 1 (AMC.2) and SATA on ports 2 and 3 (AMC.3)
- PCIe Gen3 x8, dual SATA and quad USB to RTM
- Dual 10GbE via SPF+ and dual GbE via RJ-45 to front panel
View product
AMC725 Data Sheet
VT811
8U uTCA.4 Chassis Platform
- uTCA.4 Chassis Platform with rear I/O
- 19” x 8U x 14.9” deep (with handles 16.23” deep)
- Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
- Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
- Provision to route cables from the front to the back
- Radial I2C bus to each AMC
- High-speed 30 layer passive backplane
- Redundant FRU information devices and carrier locator
- Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT811 Data Sheet
VT814
2U MTCA.4 Chassis with 6 AMC Slots
- MicroTCA rack mount or desktop chassis platform, 19” x 2U x 14.2” deep
- Compliant to MTCA.4 specifications with rear IO for High-Energy Physics and other applications
- Supports up to six MTCA.4 mid-size, double module AMCs and RTMs
- Right-to-left cooling
- Single MicroTCA Carrier Hub (MCH) and flexible Power Module options. Full integration is also available.
- Routing on 26-layer passive backplane using high-speed 12.5 GHz MTCA connectors
- Single/dual 500W AC or single/dual 796W DC power standard, other options available
- Removable Air Filter, Power Modules, and Fan Tray
- Right-to-left cooling
View product
VT814 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
