Notice: Undefined variable: video_image_popup in /var/www/clients/client1/web12/web/product.php on line 1084

AC Power Module, 1000W

  • Double-module, 12HP size module per AMC.0
  • Universal AC input (85 to 265V), 1000W
  • Provides power up to 12 AMCs, 2 MCHs and Cooling Units
  • Very low ripple voltage on +12V
  • Hot swappable with two banks of 256K flash for redundancy
  • Dual IPMI bus
  • 32–bit RISC processor

Download Datasheet Add to Info Request

add to compare
0

The UTC018 is a 1000W AC Power Module for use in a MicroTCA chassis providing up to 800W output power. It is fully compliant with the MicroTCA.0 Revision 1.0 specification; including dual-redundant I2C buses (IPMB-0).

The module is 12 HP, taking two full-size slots in a chassis It is hot-swappable and fully redundant when used in conjunction with a second module.

Multiple temperature sensors are included on-board to monitor for over-temperature conditions within the unit. The current is continuously measured for each of the modules and reported to MCH for any fault.

Once installed in the system, the firmware is upgradable via the Shelf Manager. The UTC018 can be configured to power and enable the modules without the presence of an MCH during development.

IPMI Functionality

The UTC018 is IPMI 2.0 and HPM.1 compliant with optional IPMI commands including warm/cold reset, re-arm sensor events, get device GUID, and get/set the hysteresis, threshold, and/or sensor event enable. The PMs follow the ATCA specification in fail-over for redundant IPMB-0 and FRU LED control. The units also have power channel control, get power channel status, PM reset, get PM status, and PM heartbeat. Temperature and current sensors are also included.

Key Features
  • Double-module, 12HP size module per AMC.0
  • Universal AC input (85 to 265V), 1000W
  • Provides power up to 12 AMCs, 2 MCHs and Cooling Units
  • Very low ripple voltage on +12V
  • Hot swappable with two banks of 256K flash for redundancy
  • Dual IPMI bus
  • 32–bit RISC processor
Benefits
  • Highest power AC PSU for MicroTCA in industry (1000W)
  • Support for power module redundancy
  • Electrical, mechanical, software and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

UTC003

for Conduction Cooled μTCA Chassis

  • Single module, full size module per AMC.0
  • 400MHz RISC CPU with 64MB DDR
    • for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Redundant boot system
    • ensures fail-safe upgrades
  • Fail-over with dual UTC003 in system
  • GbE to each AMC (Layer 2 managed)
  • Non-blocking PCIe x4 Gen 2 to each AMC slot with option for SRIO or 10GbE (Layer 3 managed)
  • Fabric clock with Spread Spectrum capability
  • Linux 2.6 embedded OS
  • IPMI 2.0 and HPM.1 compliant
  • Can run as an IPMI protocol analyzer to monitor all the I2C Busses
View product UTC003 Data Sheet

UTC011

DC Power Module, 241W or 460W, Conduction-cooled

  • Single module, full size module per AMC.0
  • Dual 10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
  • Support for power module redundancy and dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Field upgradable
  • IPMI 2.0 and HPM.1 compliant
  • Without the presence of an MCH the modules can be turned on
  • Menu driven software for ease of configuration
  • Current measure for each module
  • External as well as internal WDT
View product UTC011 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.