PCIe FPGA with quad QSFP28, VU13P UltraScale+TM
NEW
- PCIe x16 or any protocol on the x16 SERDES
- Xilinx UltraScale+™ VU13P FPGA
- Quad QSFP28 ports and an additional GbE
- SyncE Master/Slave
- PLL to lock to an external 1PPS or an external sinewave clock up to 400Mhz
- Dual x8 SERDES lanes for direct connection to neighboring FPGA card(s)
- Single bank of 64-bit wide DDR-4 Memory for total of 16 GB
- Active cooling or passive cooling (utilizing chassis cooling such as VadaTech VT808 chassis)
Download Datasheet Add to Info Request
add to compare
The PCI594 is based on the Xilinx VU13P UltraScale+TM FPGA, which provides over 12,000 DSP slices, 360 Mb of UltraRAM and 3,780K logic cells. The FPGA interfaces to the quad QSFP28 modules. It also has interface to a single DDR4 memory bank that is 64-bit wide with16 GB total. This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.
PCI594 has a PLL that can lock into an external clock such as 1PPS or to a sinewave clock up to 400MHz. The module also has a GbE with SyncE capabilities. The PCI594 could run as SyncE Master and/or Slave. The module provides four clock output which could be connected to adjacent PCI594 modules to allow synchronized between modules.
PCI594 has x16 PCIe edge connector routed to the FPGA PCIe hard IP block. The x16 SERDES going to the edge connector could be configured to run any protocol and integrated, for example, into VadaTech’s VT808 chassis. In addition, there are 16 uncommitted SERDES routed to a dual x8 expansion connector, providing direct connectivity to a neighboring FPGA (e.g. via Aurora, 10/40GbE, SRIO, PCIe) without the need to go through the host.
The Quad QSFP28 Cages could take 100GbE as well as 40GbE optical transceiver. The optical modules could be bifurcated to Quad 1/100/25GbE lanes for a total of 16 ports. The optical modules are protocol agnostic and could take a mix of 100G and/or 40G transceiver.
Active cooling of the module and option with passive cooling. The passive cooling requires a chassis that forces air over the PCI594 heat sink, such as VadaTech’s VT808 chassis.
Key Features
- PCIe x16 or any protocol on the x16 SERDES
- Xilinx UltraScale+™ VU13P FPGA
- Quad QSFP28 ports and an additional GbE
- SyncE Master/Slave
- PLL to lock to an external 1PPS or an external sinewave clock up to 400Mhz
- Dual x8 SERDES lanes for direct connection to neighboring FPGA card(s)
- Single bank of 64-bit wide DDR-4 Memory for total of 16 GB
- Active cooling or passive cooling (utilizing chassis cooling such as VadaTech VT808 chassis)
Benefits
- Based on the widely-used VadaTech PCI596/PCI597
- Strong BSP support and example code to support system bring-up
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC592
Kintex UltraScale FPGA Carrier for FMC, AMC
- Single module, mid-size AMC (full-size optional)
- AMC FPGA carrier for FMC per VITA 57
- Xilinx UltraScale™ XCKU115 FPGA
- Supported by DAQ Series™ data acquisition software
- AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
- AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
- Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
View product
AMC592 Data Sheet
FMC223
FMC High-speed DAC 14-bit at 2.5 GSPS Module
- FPGA Mezzanine Card (FMC) per VITA 57
- Single module AD9739 DAC 14-bit at 2.5 GSPS
- 2 Vpp differential Analog output swing
- Programmable DSP clock
- Dynamic performance
- 8 QAM carriers @ 400 MHz IF –71 dBc
- 16 QAM carriers @ 400 MHz IF –68 dBc
- 32 QAM carriers @ 400 MHz IF –65 dBc
- 72 QAM carriers @ 600 MHz IF –61 dBc
- Single tone NSD @ 2.4 GSPS
- 166 dBm/Hz @ 100 MHz IF
- 162 dBm/Hz @ 1 GHz IF
- Connection via MMCX for Analog Out and Reference Clock Input
- Connection via LVDS for TRIG In/Out and GPIO
- RoHS compliant
View product
FMC223 Data Sheet
FMC229
FMC Quad DAC 16-bit @ 2.8 GSPS with Quadrature Modulator
- FPGA Mezzanine Card (FMC) per VITA 57
- Single DAC39J84
- Quad DAC16-bit @ 2.8 GSPS
- JESD204B
- Wideband Digital Quadrature Modulator Correction
- Digital Summation of Independent Complex Signals
- Independent Complex Mixer with 48-bit NCO or +/-nxFs/8
- Selectable 1x-16x Interpolation
- On board dual Wideband Quadrature Modulator
- Trig In/Output
- RoHS compliant
View product
FMC229 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
