FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The FMC223 is an FPGA Mezzanine Module per VITA 57 specification. The FMC223 has a single DAC 14-bit at 2.5 GSPS.The DAC converter utilizes the Analog Devices AD9739.

The FMC223 is designed for synthesizing of broadband signals, with enhanced linearity and band flatness performances.

The Analog output current can be programmed over a range of 8.66 mA to 31.66 mA.

The Module utilizes a Display Port connector to bring in a clock input, user input, user output and trig input all in differential format.

Key Features
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
Benefits
  •  Array of FMC’s and FMC carriers available from VadaTech
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC515

AMC FPGA Carrier for FMC, Virtex-7

  • AMC FPGA carrier for FPGA Mezzanine Card (FMC) per VITA-57
  • Xilinx Virtex-7 XC7V2000T in 1925 package
  • AMC Ports 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD
  • On board PLL for buffering/multiplying and jitter cleaner
  • Option for 2GB of DDR3 memory to FPGA
  • On board Freescale QorIQ PPC2040 with 2 GB DDR-III
  • Serial Over LAN (SOL) with hardware RNG
View product AMC515 Data Sheet

AMC530

Altera EP4S100G AMC FPGA

  • Altera Stratix IV Device EP4S100Gx in 1517 pin count (40mm x 40mm)
  • AMC Ports 2-3 and 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Ports 0 and 1 are Muxed with P2020 GbE
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • On board PLL for buffering/multiplying and jitter cleaner
  • Option for up to 16GB of DDR3 memory to the FPGA
  • Three banks of QDR-II+ each 72-bit wide
  • Option for on board Freescale QorIQ PPC2020 with up to 4GB DDR3
View product AMC530 Data Sheet

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single ADC EV10AS150B @2.5 GSPS
  • Single module
  • 5 GHz Full Power Input Bandwidth (-3dB)
  • True single core architecture (no calibration required)
  • External Interleaving:Full scale analog input Voltage Span 500mVpp
    • Gain Adjust
    • Offset Adjust
    • Sampling Delay Adjust
  • All front panel input/outputs are via MMCX:
    • Analog Input
    • Reference clock
    • Trig in/out
    • General purpose I/O
  • Super low phase noise RF PLL Synthesizer
View product FMC210 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.