Altera Stratix® V GT FPGA, 100G
- Altera Stratix® V GT FPGA in FFG-1517 package
- Dual zQSFP+ Ports to the front panel
- Front panel Port 0 at 100G, Port 1 at up to 40G
- AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, XLAUI, etc. are FPGA programmable)
- Onboard Freescale QorIQ PPC2040 with DDR3
- FPGA can load via Flash or via the P2040
- FPGA Flash can be programmed via the JTAG or the P2040
Download Datasheet Add to Info Request
add to compare
The AMC534 is an FPGA with dual zQSFP+ connectors offering 100G performance (Port 0 at 100G, Port 1 up to 40G) via the front panel. The module is compliant to AMC.1, AMC.2, and/or AMC.4 specifications.
The onboard, re-configurable FPGA interfaces directly to the AMC FCLKA and TCLK A-D. It also has four DDR3 memory channels (32-bit wide each) with 1 GB per channel, giving 4 GB total memory. This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.
The unit also has a quad-core P2040 that can run at 1.2 GHz with 2 GB of DDR3, 128 MB of Boot Flash, and a 32 GB SD Card. The Power Processor Control (PPC) has a x4 PCIe interface to the FPGA in addition to its local bus. The PPC has dual GbE routed to Ports 0 and 1 of the AMC.
See Intel FPGA Solutions for the advantages of using VadaTech products during application development.
VIDEO: Intel FPGA solutions at VadaTech: This video introduces the advantages of using VadaTech to build your new products embedding Intel FPGA SoC.
Key Features
- Altera Stratix® V GT FPGA in FFG-1517 package
- Dual zQSFP+ Ports to the front panel
- Front panel Port 0 at 100G, Port 1 at up to 40G
- AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, XLAUI, etc. are FPGA programmable)
- Onboard Freescale QorIQ PPC2040 with DDR3
- FPGA can load via Flash or via the P2040
- FPGA Flash can be programmed via the JTAG or the P2040
Benefits
- 100G performance through one port and up to 40G performance in the 2nd port via the front panel
- Distributed processing with local P2040 processor provides more reliability, performance and eliminates a potential single-point-of-failure in the system
- Electrical, mechanical, software, and system-level expertise in house
- Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
FMC223
FMC High-speed DAC 14-bit at 2.5 GSPS Module
- FPGA Mezzanine Card (FMC) per VITA 57
- Single module AD9739 DAC 14-bit at 2.5 GSPS
- 2 Vpp differential Analog output swing
- Programmable DSP clock
- Dynamic performance
- 8 QAM carriers @ 400 MHz IF –71 dBc
- 16 QAM carriers @ 400 MHz IF –68 dBc
- 32 QAM carriers @ 400 MHz IF –65 dBc
- 72 QAM carriers @ 600 MHz IF –61 dBc
- Single tone NSD @ 2.4 GSPS
- 166 dBm/Hz @ 100 MHz IF
- 162 dBm/Hz @ 1 GHz IF
- Connection via MMCX for Analog Out and Reference Clock Input
- Connection via LVDS for TRIG In/Out and GPIO
- RoHS compliant
View product
FMC223 Data Sheet
UTC020
DC Power Module, 936W
- Single module, full-size per AMC.0
- Dual -36V DC to -75V DC input, 936W (available in 468W)
- Hot swappable with support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
View product
UTC020 Data Sheet
VT899
7U uTCA Cube Chassis, 6 AMC
- 7U μTCA Cube
- 5” x 7U x 9” deep (with handles 10” deep)
- Redundant Cooling Units
- Up to six AMCs: 6 full size single module or 3 full size double module
- Radial I2C bus to each AMC
- Single Star passive 26 layer backplane
- Redundant FRU information devices and carrier locator
- Telco Alarm
- CLK1, CLK2 and CLK3
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT899 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
