AMC Carrier for PMC/XMC Modules, MTCA.4
- Support for PMC and XMC modules
- 64-bit PCI-X @ 133 MHz for the PMC
- PCIe x4 to the XMC• AMC.1 compliant
- PCIe x4 lanes to the AMC
- PMC/XMC User I/O (J4 connector) routed to front panel and RTM
- Trig signals per the uTCA.4 are routed from Ports 17 to 20 (per SLAC specification to the J4)
- RoHS compliant
- IPMI 2.0 compliant
Download Datasheet Add to Info Request
add to compare
The AMC105 is a double module, mid-size (full-size optional) board based on the AMC.1 Specification. The AMC105 allows PMC/XMC to be installed in an AMC slot. The PMC PCI-X bus can run at 133MHz.
The PMC/XMC J4 connector is routed to the front panel of the AMC module as a standard option via the Mini-SCSI connector. Alternatively, a limited amount of I/O can be routed to the RTM (Zone 3) per the SLAC specification (contact VadaTech for details).
Ports 17-20 that are defined in the uTCA.4 spec are routed on board so that the Trig signals could be driven from the PMC/XMC to the backplane.
This modular approach allows a MicroTCA chassis to utilize the large numbers of PMC/XMC modules that are available in the market.
Key Features
- Support for PMC and XMC modules
- 64-bit PCI-X @ 133 MHz for the PMC
- PCIe x4 to the XMC• AMC.1 compliant
- PCIe x4 lanes to the AMC
- PMC/XMC User I/O (J4 connector) routed to front panel and RTM
- Trig signals per the uTCA.4 are routed from Ports 17 to 20 (per SLAC specification to the J4)
- RoHS compliant
- IPMI 2.0 compliant
Benefits
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level expertise in house
- Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
FMC223
FMC High-speed DAC 14-bit at 2.5 GSPS Module
- FPGA Mezzanine Card (FMC) per VITA 57
- Single module AD9739 DAC 14-bit at 2.5 GSPS
- 2 Vpp differential Analog output swing
- Programmable DSP clock
- Dynamic performance
- 8 QAM carriers @ 400 MHz IF –71 dBc
- 16 QAM carriers @ 400 MHz IF –68 dBc
- 32 QAM carriers @ 400 MHz IF –65 dBc
- 72 QAM carriers @ 600 MHz IF –61 dBc
- Single tone NSD @ 2.4 GSPS
- 166 dBm/Hz @ 100 MHz IF
- 162 dBm/Hz @ 1 GHz IF
- Connection via MMCX for Analog Out and Reference Clock Input
- Connection via LVDS for TRIG In/Out and GPIO
- RoHS compliant
View product
FMC223 Data Sheet
UTC020
DC Power Module, 936W
- Single module, full-size per AMC.0
- Dual -36V DC to -75V DC input, 936W (available in 468W)
- Hot swappable with support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
View product
UTC020 Data Sheet
VT899
7U uTCA Cube Chassis, 6 AMC
- 7U μTCA Cube
- 5” x 7U x 9” deep (with handles 10” deep)
- Redundant Cooling Units
- Up to six AMCs: 6 full size single module or 3 full size double module
- Radial I2C bus to each AMC
- Single Star passive 26 layer backplane
- Redundant FRU information devices and carrier locator
- Telco Alarm
- CLK1, CLK2 and CLK3
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT899 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
