PCIe FPGA Carrier for FMC+, Kintex UltraScale™
- PCIe FPGA carrier for FMC+ per VITA 57
- Xilinx Kintex UltraScale™ XCKU115 FPGA
- Active cooling for FPGA and FMC+
- Dual x8 lanes for direct connection to neighbouring FPGA card(s)
- Two banks of 64-bit wide and a single bank of 32-bit wide DDR4 for a total of 20 GB
Download Datasheet Add to Info Request
add to compare
The PCI592 is based on the Xilinx XCKU115 Kintex UltraScale FPGA, which provides 5,520 DSP slices, 75.9 Mb RAM and 1,451,000 logic cells. The FPGA interfaces directly to the FMC+ DP-23 and all FMC+ LA/HA/HB pairs, making it compatible with a wide range of industry standard VITA 57 modules. It also has interface to three DDR4 memory channels (2x 64-bit wide and 1x 32-bit wide). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.
The unit has x8 PCIe edge connector routed to the FPGA PCIe Gen3 hard IP block. In addition, 16 uncommitted connection pairs are routed to a dual x8 expansion connector, providing direct connectivity to a neighbouring FPGA (e.g. via Aurora, 10G/40G, SRIO, PCIe) without the need to go through the host.
PCI592 provides active cooling of the FPGA and FMC+ (the module does not support HSPCe connector) making it appropriate for power-hungry applications or those requiring temperature stability for good performance.
Key Features
- PCIe FPGA carrier for FMC+ per VITA 57
- Xilinx Kintex UltraScale™ XCKU115 FPGA
- Active cooling for FPGA and FMC+
- Dual x8 lanes for direct connection to neighbouring FPGA card(s)
- Two banks of 64-bit wide and a single bank of 32-bit wide DDR4 for a total of 20 GB
Benefits
- Based on the widely-used VadaTech AMC592
- Strong BSP support and example code to support system bring-up
- Wide range of compatible FMCs, including ADC, DAC and networking
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC592
Kintex UltraScale FPGA Carrier for FMC, AMC
- Single module, mid-size AMC (full-size optional)
- AMC FPGA carrier for FMC per VITA 57
- Xilinx UltraScale™ XCKU115 FPGA
- Supported by DAQ Series™ data acquisition software
- AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
- AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
- Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
View product
AMC592 Data Sheet
FMC223
FMC High-speed DAC 14-bit at 2.5 GSPS Module
- FPGA Mezzanine Card (FMC) per VITA 57
- Single module AD9739 DAC 14-bit at 2.5 GSPS
- 2 Vpp differential Analog output swing
- Programmable DSP clock
- Dynamic performance
- 8 QAM carriers @ 400 MHz IF –71 dBc
- 16 QAM carriers @ 400 MHz IF –68 dBc
- 32 QAM carriers @ 400 MHz IF –65 dBc
- 72 QAM carriers @ 600 MHz IF –61 dBc
- Single tone NSD @ 2.4 GSPS
- 166 dBm/Hz @ 100 MHz IF
- 162 dBm/Hz @ 1 GHz IF
- Connection via MMCX for Analog Out and Reference Clock Input
- Connection via LVDS for TRIG In/Out and GPIO
- RoHS compliant
View product
FMC223 Data Sheet
FMC229
FMC Quad DAC 16-bit @ 2.8 GSPS with Quadrature Modulator
- FPGA Mezzanine Card (FMC) per VITA 57
- Single DAC39J84
- Quad DAC16-bit @ 2.8 GSPS
- JESD204B
- Wideband Digital Quadrature Modulator Correction
- Digital Summation of Independent Complex Signals
- Independent Complex Mixer with 48-bit NCO or +/-nxFs/8
- Selectable 1x-16x Interpolation
- On board dual Wideband Quadrature Modulator
- Trig In/Output
- RoHS compliant
View product
FMC229 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
