Octal zSFP+/SFP28 (protocol agnostic)
The FMC116 is a FPGA Mezzanine Card (FMC) compatible with VITA 57.1 FMC carriers. It has eight zSFP+/SFP28 cages which allows for octal optics to be routed to DP0+/- to DP7+/-pins.
The FMC116 is protocol-agnostic and has a low jitter fractional PLL which can lock to CLK2 and CLK3 coming from the Carrier or be free running. The fractional PLL can generate two separate clocks to the two GBT clock pins and can provide two more additional clocks on CLK0 and CLK1 for the carrier.
The module has on board Multi-Rate Re-Timer with Integrated Signal conditioning, tuneable per lane. All channels lock independently from 20.2Gbps to 28.4 Gbps (including sub-rates such as 10.1376, 10.3125, 12.5, etc.). The module cannot run slower than 5.05Gbps. Adaptive Continuous Time Linear Equalizer (CTLE) with Adaptive Decision Feedback Equalizer (DFE).
The unit does not follow VITA 57 mechanical height specifications. A custom monolithic panel is required to allow for the extended height opening of the zSFP+/SFP28 cages for integration with the carrier.
Note: VadaTech can supply a custom front panel to fit any of our FMC carriers. VPX module (10 HP panel) or AMC module (8 HP panel).
Key Features
- FPGA Mezzanine Card (FMC) compatible with VITA 57.1
- Eight zSFP+/SFP28 cages
- Onboard Fractional PLL to generate any clock
- Protocol agnostic (i.e. 5GbE, 10Gb, 28G, Aurora, etc.)
- Compact assembly
Benefits
- Single module provides octal 10Gb, 28G
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC585
Zynq UltraScale+ FPGA, FMC+ Carrier, AMC
- Xilinx UltraScale+ XCZU19EG FPGA
- Single FMC+ (VITA 57.4) site
- 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC (CPU)
- 8 GB of 64-bit wide DDR4 Memory (single bank, FPGA)
- MPSoC with block RAM and UltraRAM
- SD Card (option)
- 128 MB of boot Flash
- 64 GB of user Flash
View product
AMC585 Data Sheet
FMC214
70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC
- Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
- Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
- MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
- Supported by DAQ Series™ data acquisition software
- FPGA Mezzanine Card (FMC) per VITA 57
- Multiplexed 2x RF inputs on each RF channel
- On-board clocking with multi-card synchronization capability
- Low Pin Count (LPC) 160-pin connector
View product
FMC214 Data Sheet
VPX592
FPGA/FMC Carrier, Kintex UltraScale™, 3U VPX
- 3U FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 46 and VITA 57
- Xilinx Kintex UltraScale™ XCKU115 FPGA
- High-performance clock jitter cleaner
- VHDL reference design with source code
- Protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable
- Compatible with VadaTech and 3rd party FMCs
- 20 GB of DDR4 Memory (2 banks of 64-bit wide, and single bank of 32-bit wide)
- Health Management through dedicated Processor
View product
VPX592 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
