FMC224

Quad DAC 16-bit @ 2.8 GSPS, FMC

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Quad Port DAC 16-bit at 2.8 GSPS (TI DAC39J84)
  • Independent 1x16x Interpolation
  • Independent Complex Mixers with 48-bit NCO/ or +/-xFs/8
  • Sinx/x Correction Filters
  • Digital Summation of Independent Complex Signals
  • Onboard Wideband PLL
  • Trig In/Out

Download Datasheet Add to Info Request

add to compare
0

The FMC224 is an FPGA Mezzanine Card (FMC) per the VITA 57 specification. The module has a quad Port DAC 16-bit @ 2.8 GSPS.

The DAC converter utilizes the TI DAC39J84 which is JESD204B compliant. The device includes features that streamline the design of complex transmit architecture. It includes fully by-passable 2x to 16x digital interpolation filters with over 90 dB of stop-band attenuation to simplify the data interface.

An on-chip 48-bit Numerically Controlled Oscillator (NCO) and independent complex mixer allow flexible and accurate carrier placement.

The module has a wide-band PLL which can take its reference clock via the front panel, FMC Carrier or the onboard reference. The unit also allows the RF Clock syntheses to be generated by the onboard wide-band PLL or the front panel.

 

Key Features
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Quad Port DAC 16-bit at 2.8 GSPS (TI DAC39J84)
  • Independent 1x16x Interpolation
  • Independent Complex Mixers with 48-bit NCO/ or +/-xFs/8
  • Sinx/x Correction Filters
  • Digital Summation of Independent Complex Signals
  • Onboard Wideband PLL
  • Trig In/Out
Benefits

 

  • Excellent dynamic  and direct RF synthesis performance with minimal loss in output power
  • Ideal for Broadband communications systems, Wireless infrastructure, LTE, ATE, RADAR/Jamming
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC515

AMC FPGA Carrier for FMC, Virtex-7

  • AMC FPGA carrier for FPGA Mezzanine Card (FMC) per VITA-57
  • Xilinx Virtex-7 XC7V2000T in 1925 package
  • AMC Ports 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD
  • On board PLL for buffering/multiplying and jitter cleaner
  • Option for 2GB of DDR3 memory to FPGA
  • On board Freescale QorIQ PPC2040 with 2 GB DDR-III
  • Serial Over LAN (SOL) with hardware RNG
View product AMC515 Data Sheet

AMC517

Kintex-7 FPGA Carrier for FMC, AMC

  •  AMC FPGA carrier for FMC per VITA 57
  • Xilinx Kintex-7 410T FPGA in FFG-900 package with optional P2040
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • Single module, mid-size AMC (full-size optional)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC517 Data Sheet

FMC210

FMC ADC 10-bit @ 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single ADC EV10AS150B @2.5 GSPS
  • Single module
  • 5 GHz Full Power Input Bandwidth (-3dB)
  • True single core architecture (no calibration required)
  • External Interleaving:Full scale analog input Voltage Span 500mVpp
    • Gain Adjust
    • Offset Adjust
    • Sampling Delay Adjust
  • All front panel input/outputs are via MMCX:
    • Analog Input
    • Reference clock
    • Trig in/out
    • General purpose I/O
  • Super low phase noise RF PLL Synthesizer
View product FMC210 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.