MTCA.4 RTM for AMC577
- 4 RTM for the AMC577
- 16 ADC and 16 DAC signals to rear (Zone three)
- DC-coupled ADC inputs have low noise and programmable amplifiers.
- DC-coupled DAC have output amplifiers
- Trigger routed to rear panel (four trig in and two trig out)
- 16 Programmable LED with 8 LVDS Input/Output
Download Datasheet Add to Info Request
add to compare
The MRT577C is a Rear Transition Module (RTM) for VadaTech’s AMC577, routing analog and user I/O signals to the rear panel.
The 16 ADC/DAC are DC coupled to the ADC/DAC. The 16 RF Input channels are routed via programmable and low-noise amplifiers. The 16 DAC output go thru a Differential-to-Single-Ended Amplifier. The 16 ADC channels have the same front end as well as the 16 DAC channels.
Four Trig in and two Trig out signals are also supported.
The module has 16 LEDs (user defined) as well as a High Density (HD) connector for user I/O.\
VadaTech offers a wide range of MicroTCA.4 products, including full systems. Contact your local salesperson or representative for details.
Key Features
- 4 RTM for the AMC577
- 16 ADC and 16 DAC signals to rear (Zone three)
- DC-coupled ADC inputs have low noise and programmable amplifiers.
- DC-coupled DAC have output amplifiers
- Trigger routed to rear panel (four trig in and two trig out)
- 16 Programmable LED with 8 LVDS Input/Output
Benefits
- Expertise in RTM and MTCA.4 board design
- Full ecosystem of MicroTCA.4 AMCs, PMs, MCH, RTMs, chassis, and application-ready systems
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level expertise in house
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC523
Dual DAC 16-bit @ 250 MSPS, Kintex-7, MTCA.4
- Dual DAC 16-bit @ 250 MSPS utilizing MAX5878 device (user programmable for lower sampling rate)
- Xilinx Kintex-7 FPGA XC7K410T in FFG900 package
- Supported by DAQ Series™ data acquisition software
- 2 GB of DDR3 memory
- Internal clock or precision external clock from RTM/backplane/front panel clocks
- Trig in/out configurable by software (external trigger via front or port 17)
- x8 PCIe (or dual x4)
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
- Quad SFP+ (up to 6.6 Gbps)
- JTAG selectable front and backplane
View product
AMC523 Data Sheet
UTC018
AC Power Module, 1000W
- Double-module, 12HP size module per AMC.0
- Universal AC input (85 to 265V), 1000W
- Provides power up to 12 AMCs, 2 MCHs and Cooling Units
- Very low ripple voltage on +12V
- Hot swappable with two banks of 256K flash for redundancy
- Dual IPMI bus
- 32–bit RISC processor
View product
UTC018 Data Sheet
VT811
8U uTCA.4 Chassis Platform
- uTCA.4 Chassis Platform with rear I/O
- 19” x 8U x 14.9” deep (with handles 16.23” deep)
- Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
- Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
- Provision to route cables from the front to the back
- Radial I2C bus to each AMC
- High-speed 30 layer passive backplane
- Redundant FRU information devices and carrier locator
- Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT811 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
